Mon–Sat 10 am – 7 pm · Okhla Phase II, New Delhi +91 98181 98500 · info@skyfashion.in

Home › Products › Flag printing › Polyester satin › Polyester satin flags for trade shows and exhibitions

Polyester satin flags for trade shows and exhibitions

Flags for trade shows and exhibitions on polyester satin, printed by sublimation and stitched in Okhla, Delhi: 10 flags take about 15.8 m of 58-inch.

What flags for trade shows and exhibitions need

Indoor exhibition flags hang under hall lights and in front of light boxes, so opacity and sheen matter more than wind.

Why polyester satin for trade shows and exhibitions: it is opaque — booth lights behind a flag show nothing through; it has a sheen — a satin face catches hall lighting; it is light — it folds into a carry case.

Trade-off: It meets every need on the list for trade shows and exhibitions. The high sheen can glare under strong light and shows every crease.

Buyer tip for trade shows and exhibitions: Send the stand layout: a flag behind a lit display needs an opaque base or the lights show through.

Print your own design: send the artwork, the size and the quantity, and we print a sample on polyester satin before the run. Order the printed fabric only, or ready flags stitched in-house for trade shows and exhibitions.

WhatsApp your designOr use the form

Printed satin scarf with a glossy finish

Flags for trade shows and exhibitions on polyester satin: size and quantity

Recommended size90 x 150 cm indoor banner flag (cut 94 x 158 cm with sleeve)
From 3 m of 58-inch fabric (about 143 cm usable)1 flag from 3 m (1 across × 1 down, each cut 94 × 158 cm)
Fabric for 10 flagsAbout 15.8 m of 58-inch polyester satin, before samples and spares
Fabric weight per pieceAbout 134-178 g per flag at this size (typical 90-120 gsm), before trims and packing
How orders runA handful per stand, reprinted for each new campaign
Finishing for trade shows and exhibitionsPole sleeve, double-stitched hems, folded for a case
Care in useFold loosely for transport and steam out creases on site. Fabric care: cool machine wash; iron on the reverse on low heat

What we check for trade shows and exhibitions

  • Opaque: booth lights behind a flag show nothing through ✓
  • Sheen: a satin face catches hall lighting ✓
  • Light: it folds into a carry case ✓

The other fabric we shortlist for flags for trade shows and exhibitions:

Specification

Printing processSublimation on polyester (two Mimaki printers)
FabricsPolyester satin
Typical fabric weightTypical 90-120 gsm (typical width 58″)
Sizes90 x 150 cm indoor banner flag (cut 94 x 158 cm with sleeve)
Order asPrinted fabric only, or the ready finished product, stitched and packed in-house
Finishing optionsPole sleeve, double-stitched hems, folded for a case
Minimum orderFrom 3 metres of fabric, or a few sample pieces, including finished pieces
TurnaroundSample first; sample and bulk dates are confirmed with your quote
CareCool machine wash; iron on the reverse on low heat
  • Any MOQ — from 3 metres, or a few sample pieces
  • Competitive per-metre pricing — ask for a quote
  • In-house digital printing unit at S-73, Okhla Industrial Area Phase II, New Delhi, since 1996
  • In-house tailoring: printed fabric only, or the ready stitched product

Frequently asked questions

Is polyester satin a good choice for flags for trade shows and exhibitions?

Why polyester satin for trade shows and exhibitions: it is opaque — booth lights behind a flag show nothing through; it has a sheen — a satin face catches hall lighting; it is light — it folds into a carry case. Trade-off: it meets every need on the list for trade shows and exhibitions. The high sheen can glare under strong light and shows every crease.

How many flags for trade shows and exhibitions come from 3 metres of polyester satin?

We recommend 90 x 150 cm indoor banner flag (cut 94 x 158 cm with sleeve) for trade shows and exhibitions. From 3 m of 58-inch fabric (about 143 cm usable): 1 flag from 3 m (1 across × 1 down, each cut 94 × 158 cm). Fabric for 10 flags: about 15.8 m of 58-inch polyester satin, before samples and spares. Counts are typical; we confirm them with your quote.

Can you deliver ready flags for trade shows and exhibitions, or only printed polyester satin?

Both. Our in-house tailoring finishes them for trade shows and exhibitions: pole sleeve, double-stitched hems, folded for a case. Or take the printed polyester satin only.

Which flag fabric works best indoors at an exhibition?

An opaque satin or micro polyester: the print stays solid in front of lights and the satin face catches hall lighting.

Is there a minimum order quantity (MOQ)?

Any MOQ is fine: we print from as little as 3 metres, and sample pieces too, up to bulk.

What is your price per metre?

Competitive per-metre pricing. Ask for a quote with your fabric, design and quantity and we reply with the price.

Get a quote for polyester satin flags for trade shows and exhibitions

Send your design, the size and the quantity. We reply with the price and a sample plan.

Up to 3 files, 20 MB each — JPG, PNG, TIFF, PDF, PSD, AI, EPS, CDR or ZIP. Bigger files: send them on WhatsApp.
Or WhatsApp us

HM International

Okhla Industrial, S-73, Sanjay Colony II, Pocket Y, Sanjay Colony, Okhla Phase II, Area, New Delhi, Delhi 110020

+91 98181 98500

Monday10 am – 7 pm
Tuesday10 am – 7 pm
Wednesday10 am – 7 pm
Thursday10 am – 7 pm
Friday10 am – 7 pm
Saturday10 am – 7 pm
SundayClosed
WhatsApp us