Mon–Sat 10 am – 7 pm · Okhla Phase II, New Delhi +91 98181 98500 · info@skyfashion.in

Home › Products › Flag printing › Peach-finish polyester › Peach-finish polyester flags for trade shows and exhibitions

Peach-finish polyester flags for trade shows and exhibitions

Flags for trade shows and exhibitions on peach-finish polyester, printed by sublimation and stitched in Okhla, Delhi: 10 flags take about 15.8 m of 58-inch.

What flags for trade shows and exhibitions need

Indoor exhibition flags hang under hall lights and in front of light boxes, so opacity and sheen matter more than wind.

Why peach-finish polyester for trade shows and exhibitions: it is opaque — booth lights behind a flag show nothing through; it is light — it folds into a carry case.

Watch: It has a matte face, not a sheen, which matters here because a satin face catches hall lighting.

Buyer tip for trade shows and exhibitions: Send the stand layout: a flag behind a lit display needs an opaque base or the lights show through.

Print your own design: send the artwork, the size and the quantity, and we print a sample on peach-finish polyester before the run. Order the printed fabric only, or ready flags stitched in-house for trade shows and exhibitions.

WhatsApp your designOr use the form

Patterned polyester fabric running through one of our digital printers

Flags for trade shows and exhibitions on peach-finish polyester: size and quantity

Recommended size90 x 150 cm indoor banner flag (cut 94 x 158 cm with sleeve)
From 3 m of 58-inch fabric (about 143 cm usable)1 flag from 3 m (1 across × 1 down, each cut 94 × 158 cm)
Fabric for 10 flagsAbout 15.8 m of 58-inch peach-finish polyester, before samples and spares
Fabric weight per pieceAbout 119-178 g per flag at this size (typical 80-120 gsm), before trims and packing
How orders runA handful per stand, reprinted for each new campaign
Finishing for trade shows and exhibitionsPole sleeve, double-stitched hems, folded for a case
Care in useFold loosely for transport and steam out creases on site. Fabric care: cool machine wash; dries quickly

What we check for trade shows and exhibitions

  • Opaque: booth lights behind a flag show nothing through ✓
  • Sheen: a satin face catches hall lighting (not met by peach-finish polyester)
  • Light: it folds into a carry case ✓

The other fabric we shortlist for flags for trade shows and exhibitions:

Specification

Printing processSublimation on polyester (two Mimaki printers)
FabricsPolyester micro (peach)
Typical fabric weightTypical 80-120 gsm (typical width 58″)
Sizes90 x 150 cm indoor banner flag (cut 94 x 158 cm with sleeve)
Order asPrinted fabric only, or the ready finished product, stitched and packed in-house
Finishing optionsPole sleeve, double-stitched hems, folded for a case
Minimum orderFrom 3 metres of fabric, or a few sample pieces, including finished pieces
TurnaroundSample first; sample and bulk dates are confirmed with your quote
CareCool machine wash; dries quickly
  • Any MOQ — from 3 metres, or a few sample pieces
  • Competitive per-metre pricing — ask for a quote
  • In-house digital printing unit at S-73, Okhla Industrial Area Phase II, New Delhi, since 1996
  • In-house tailoring: printed fabric only, or the ready stitched product

Frequently asked questions

Is peach-finish polyester a good choice for flags for trade shows and exhibitions?

Why peach-finish polyester for trade shows and exhibitions: it is opaque — booth lights behind a flag show nothing through; it is light — it folds into a carry case. Watch: it has a matte face, not a sheen, which matters here because a satin face catches hall lighting.

How many flags for trade shows and exhibitions come from 3 metres of peach-finish polyester?

We recommend 90 x 150 cm indoor banner flag (cut 94 x 158 cm with sleeve) for trade shows and exhibitions. From 3 m of 58-inch fabric (about 143 cm usable): 1 flag from 3 m (1 across × 1 down, each cut 94 × 158 cm). Fabric for 10 flags: about 15.8 m of 58-inch peach-finish polyester, before samples and spares. Counts are typical; we confirm them with your quote.

Can you deliver ready flags for trade shows and exhibitions, or only printed peach-finish polyester?

Both. Our in-house tailoring finishes them for trade shows and exhibitions: pole sleeve, double-stitched hems, folded for a case. Or take the printed peach-finish polyester only.

Which flag fabric works best indoors at an exhibition?

An opaque satin or micro polyester: the print stays solid in front of lights and the satin face catches hall lighting.

Is there a minimum order quantity (MOQ)?

Any MOQ is fine: we print from as little as 3 metres, and sample pieces too, up to bulk.

What is your price per metre?

Competitive per-metre pricing. Ask for a quote with your fabric, design and quantity and we reply with the price.

Get a quote for peach-finish polyester flags for trade shows and exhibitions

Send your design, the size and the quantity. We reply with the price and a sample plan.

Up to 3 files, 20 MB each — JPG, PNG, TIFF, PDF, PSD, AI, EPS, CDR or ZIP. Bigger files: send them on WhatsApp.
Or WhatsApp us

HM International

Okhla Industrial, S-73, Sanjay Colony II, Pocket Y, Sanjay Colony, Okhla Phase II, Area, New Delhi, Delhi 110020

+91 98181 98500

Monday10 am – 7 pm
Tuesday10 am – 7 pm
Wednesday10 am – 7 pm
Thursday10 am – 7 pm
Friday10 am – 7 pm
Saturday10 am – 7 pm
SundayClosed
WhatsApp us