Mon–Sat 10 am – 7 pm · Okhla Phase II, New Delhi +91 98181 98500 · info@skyfashion.in

Home › Products › Flag printing › Polyester roto

Polyester roto flag printing

Custom flags on polyester roto, printed by sublimation in Okhla, Delhi: about 6 flags from 3 m of typical 58-inch polyester roto. Fabric or ready-made.

Is polyester roto right for flags?

Polyester roto suits flags: sublimated colour sits inside the fibre and stands up to sun and wind and it keeps the cost per piece low. Printed with sublimation: bright colour on a cotton-look surface.

Trade-off: It is at the heavy end for flags: more body, but stiffer to stitch and fold. If that matters, choose polyester satin for a lighter, softer piece.

Design tips: Keep logos away from the pole sleeve and allow 2 cm for hems on the fly edge. On polyester roto, logos, stripes and bright repeats print crisp and even.

Print your own design: send the artwork and the flag size, and we print a sample on polyester roto before the run. Order the printed fabric only, or ready flags stitched in-house.

WhatsApp your designOr use the form

Swirl design printing on polyester fabric

Flags on polyester roto: size and yield

Typical finished size60 x 90 cm (cut 64 x 98 cm with hem and pole sleeve); 90 x 150 cm or your size
On 44-inch fabric (about 108 cm usable)4 flags from 3 m (1 across × 4 down = 4 pieces of 98 × 64 cm)
On 58-inch fabric (about 143 cm usable)6 flags from 3 m (2 across × 3 down = 6 pieces of 64 × 98 cm)
Fabric for 10 flagsAbout 4.9 m of 58-inch fabric, before any extra for samples
How it is countedPieces are counted on the usable width (fabric width less about 4 cm of selvedge) across a 3 m length, trying both directions.
Finishing optionsDouble-stitched hems, pole sleeve, grommets or ties, two-layer double-sided flags

Polyester roto at a glance

Hand-feel and drapeMedium weight, with a cotton-like, slightly crisp feel
SheenMatte
OpacityOpaque
Typical weight / widthTypical medium weight; typical width 44-58″
How the print looksSublimation: Bright colour on a cotton-look surface
CareMachine wash; dries quickly, needs little ironing
Good forUniforms, shirts, aprons, backdrops
Not ideal forFluid drapes

How polyester roto meets what flags need

Weight: flags work on very light to medium-weight fabricPolyester roto is medium-weight, typical medium weight, at the heavy end of that range.
Opacity: flags can be sheerPolyester roto is opaque with room to spare.
Outdoors: flags face sun and windPolyester roto is sublimated polyester, so the colour is inside the fibre.

On 58-inch polyester roto, 2 cut pieces of 64 cm sit across the 143 cm usable width, leaving about 15 cm (10% of the width) as offcut on every row.

Making flags in polyester roto

Polyester roto is medium-weight, so it takes the usual flag finish without special handling: double-stitched hems.

What the print process means here

Flags in polyester roto are printed by sublimation, the process for polyester: heat turns the dye to a gas that enters the fibre, so the colour stands up to sun and wind on flags. Polyester roto is opaque, so the reverse of a flag stays much paler than the printed face; order a two-layer flag if both sides must show the design. Digital printing has no white ink, so any white in a flag design is the colour of the polyester roto itself.

Polyester roto or polyester spun for flags?

Against polyester spun, polyester roto for flags is crisp in the hand where polyester spun is soft. Pick polyester roto for a crisper flag; pick polyester spun for a softer one. See polyester spun flags.

Other fabrics for flags

Other products in polyester roto

Specification

Printing processSublimation on polyester (two Mimaki printers)
FabricsPolyester roto
Typical fabric weightTypical medium weight (typical width 44-58″)
Sizes60 x 90 cm (cut 64 x 98 cm with hem and pole sleeve); 90 x 150 cm or your size
Order asPrinted fabric only, or the ready finished product, stitched and packed in-house
Finishing optionsDouble-stitched hems, pole sleeve, grommets or ties, two-layer double-sided flags
Minimum orderFrom 3 metres of fabric, or a few sample pieces, including finished pieces
TurnaroundSample first; sample and bulk dates are confirmed with your quote
CareMachine wash; dries quickly, needs little ironing. Flags spend time outdoors; take polyester roto in from heavy rain and wash off dust in cold water.
  • Any MOQ — from 3 metres, or a few sample pieces
  • Competitive per-metre pricing — ask for a quote
  • In-house digital printing unit at S-73, Okhla Industrial Area Phase II, New Delhi, since 1996
  • In-house tailoring: printed fabric only, or the ready stitched product

Frequently asked questions

Is polyester roto good for flags?

Polyester roto suits flags: sublimated colour sits inside the fibre and stands up to sun and wind and it keeps the cost per piece low. It is at the heavy end for flags: more body, but stiffer to stitch and fold.

How many flags can I get from 3 metres of polyester roto?

On 44-inch fabric (about 108 cm usable): 4 flags from 3 m (1 across × 4 down = 4 pieces of 98 × 64 cm). On 58-inch fabric (about 143 cm usable): 6 flags from 3 m (2 across × 3 down = 6 pieces of 64 × 98 cm). Fabric for 10 flags: about 4.9 m of 58-inch fabric, before any extra for samples. Sizes and yields are typical; we confirm them with your quote.

Can you deliver ready flags in polyester roto, or only the printed fabric?

Both: our in-house tailoring stitches the flags, or you take the printed polyester roto only. Polyester roto is medium-weight, so it takes the usual flag finish without special handling: double-stitched hems.

How do I wash a printed polyester roto flag?

Machine wash; dries quickly, needs little ironing. Flags spend time outdoors; take polyester roto in from heavy rain and wash off dust in cold water. Sublimated colour is inside the polyester fibre, so it does not crack or peel.

What can I use instead of polyester roto for flags?

Polyester satin, for a lighter, softer piece. Polyester satin is smooth and slippery, with a fluid drape.

How does polyester roto compare with peach-finish polyester for flags?

Against peach-finish polyester, polyester roto for flags is heavier (typical medium weight against 80-120 gsm); and crisp in the hand where peach-finish polyester is soft. Pick polyester roto for a heavier and crisper flag; pick peach-finish polyester for a lighter and softer one.

What is the minimum order quantity for polyester roto flags?

Any MOQ — from 3 metres, or a few sample pieces. 3 m of polyester roto already makes about 6 flags, so a sample run can be a small batch.

How is the price of polyester roto flags worked out?

Competitive per-metre pricing, quoted for your design and quantity. For flags, polyester roto sits in the lowest cost band of the bases we print, and ready flags add stitching and finishing to the printed fabric.

Get a quote for polyester roto flags

Send your design, the size and the quantity. We reply with the price and a sample plan.

Up to 3 files, 20 MB each — JPG, PNG, TIFF, PDF, PSD, AI, EPS, CDR or ZIP. Bigger files: send them on WhatsApp.
Or WhatsApp us

HM International

Okhla Industrial, S-73, Sanjay Colony II, Pocket Y, Sanjay Colony, Okhla Phase II, Area, New Delhi, Delhi 110020

+91 98181 98500

Monday10 am – 7 pm
Tuesday10 am – 7 pm
Wednesday10 am – 7 pm
Thursday10 am – 7 pm
Friday10 am – 7 pm
Saturday10 am – 7 pm
SundayClosed
WhatsApp us