Mon–Sat 10 am – 7 pm · Okhla Phase II, New Delhi +91 98181 98500 · info@skyfashion.in

Home › Products › Hijab printing › Polyester satin

Polyester satin hijab printing

Custom hijabs on polyester satin, printed by sublimation in Okhla, Delhi: about 1 hijab from 3 m of typical 58-inch polyester satin. Fabric or ready-made.

Is polyester satin right for hijabs?

Polyester satin suits hijabs: it falls in fluid folds and it keeps the cost per piece low. Printed with sublimation: the brightest, sharpest colour of all; the dye is inside the fibre, so it cannot crack.

Trade-off: The high sheen can glare under strong light and shows every crease. If that matters, choose cotton voile for a matte look.

Design tips: Place borders along the long edges, which frame the face when the hijab is worn. On polyester satin, bright, saturated colours and dark grounds look glossy and rich.

Print your own design: send the artwork and the hijab size, and we print a sample on polyester satin before the run. Order the printed fabric only, or ready hijabs stitched in-house.

WhatsApp your designOr use the form

Printed satin scarf with a glossy finish

Hijabs on polyester satin: size and yield

Typical finished sizeRectangular about 70 x 180 cm (cut 72 x 182 cm); square 110 x 110 cm
On 58-inch fabric (about 143 cm usable)1 hijab from 3 m (1 across × 1 down = 1 pieces of 72 × 182 cm)
Fabric for 10 hijabsAbout 18.2 m of 58-inch fabric, before any extra for samples
Weight of fabric used per pieceAbout 118-157 g per hijab, before trims and packing
How it is countedPieces are counted on the usable width (fabric width less about 4 cm of selvedge) across a 3 m length, trying both directions.
Finishing optionsRolled or overlocked edges, folded and packed

Polyester satin at a glance

Hand-feel and drapeSmooth and slippery, with a fluid drape
SheenHigh sheen
OpacityOpaque at typical weights
Typical weight / widthTypical 90-120 gsm; typical width 58″
How the print looksSublimation: The brightest, sharpest colour of all; the dye is inside the fibre, so it cannot crack
CareCool machine wash; iron on the reverse on low heat
Good forScarves, scroll invitations, table flags, linings, pooja cloth, cushion covers
Not ideal forNapkins and towels (low absorbency)

How polyester satin meets what hijabs need

Weight: hijabs work on very light to light fabricPolyester satin is light, typical 90-120 gsm, at the heavy end of that range.
Opacity: hijabs can be sheerPolyester satin is opaque with room to spare.
Drape: hijabs handle best in a soft or fluid fabricPolyester satin is fluid, a match.

On 58-inch polyester satin, 1 cut piece of 72 cm sit across the 143 cm usable width, leaving about 71 cm (50% of the width) as offcut on every row.

Making hijabs in polyester satin

Polyester satin is light, so it takes the usual hijab finish without special handling: rolled or overlocked edges. The high-sheen face of polyester satin shifts when cut and shows needle marks, so hijab panels are best cut in single layers and stitched without unpicking. Polyester satin shows creases, so finished hijabs are pressed before they are folded and packed.

What the print process means here

Hijabs in polyester satin are printed by sublimation, the process for polyester: heat turns the dye to a gas that enters the fibre, so nothing sits on the surface to crack when the hijab is folded. Polyester satin is opaque, so the reverse of a hijab stays much paler than the printed face. The high-sheen face deepens dark shades, so dark-ground hijabs look richest on polyester satin. Digital printing has no white ink, so any white in a hijab design is the colour of the polyester satin itself.

Polyester satin or polyester crepe for hijabs?

Against polyester crepe, polyester satin for hijabs is opaque where polyester crepe is semi-opaque; and high-sheen where polyester crepe is matte. Pick polyester satin for a more opaque and glossier hijab; pick polyester crepe for a sheerer and more matte one. See polyester crepe hijabs.

Other fabrics for hijabs

Other products in polyester satin

Specification

Printing processSublimation on polyester (two Mimaki printers)
FabricsPolyester satin
Typical fabric weightTypical 90-120 gsm (typical width 58″)
SizesRectangular about 70 x 180 cm (cut 72 x 182 cm); square 110 x 110 cm
Order asPrinted fabric only, or the ready finished product, stitched and packed in-house
Finishing optionsRolled or overlocked edges, folded and packed
Minimum orderFrom 3 metres of fabric, or a few sample pieces, including finished pieces
TurnaroundSample first; sample and bulk dates are confirmed with your quote
CareCool machine wash; iron on the reverse on low heat. Hijabs in polyester satin wash cool, dry fast and need little ironing.
  • Any MOQ — from 3 metres, or a few sample pieces
  • Competitive per-metre pricing — ask for a quote
  • In-house digital printing unit at S-73, Okhla Industrial Area Phase II, New Delhi, since 1996
  • In-house tailoring: printed fabric only, or the ready stitched product

Frequently asked questions

Is polyester satin good for hijabs?

Polyester satin suits hijabs: it falls in fluid folds and it keeps the cost per piece low. The high sheen can glare under strong light and shows every crease.

How many hijabs can I get from 3 metres of polyester satin?

On 58-inch fabric (about 143 cm usable): 1 hijab from 3 m (1 across × 1 down = 1 pieces of 72 × 182 cm). Fabric for 10 hijabs: about 18.2 m of 58-inch fabric, before any extra for samples. Weight of fabric used per piece: about 118-157 g per hijab, before trims and packing. Sizes and yields are typical; we confirm them with your quote.

Can you deliver ready hijabs in polyester satin, or only the printed fabric?

Both: our in-house tailoring stitches the hijabs, or you take the printed polyester satin only. Polyester satin is light, so it takes the usual hijab finish without special handling: rolled or overlocked edges. The high-sheen face of polyester satin shifts when cut and shows needle marks, so hijab panels are best cut in single layers and stitched without unpicking.

How do I wash a printed polyester satin hijab?

Cool machine wash; iron on the reverse on low heat. Hijabs in polyester satin wash cool, dry fast and need little ironing. Sublimated colour is inside the polyester fibre, so it does not crack or peel.

What can I use instead of polyester satin for hijabs?

Cotton voile, for a matte look. Cotton voile is very light, airy and soft; drapes easily.

How does polyester satin compare with silk satin for hijabs?

Against silk satin, polyester satin for hijabs is opaque where silk satin is semi-opaque; polyester where silk satin is silk; easy-care polyester (cool machine wash, dries fast) where silk satin is dry clean or a cold hand wash; and lower in cost. Pick polyester satin for a more opaque and easier-care hijab; pick silk satin for a sheerer and natural-fibre one.

What is the minimum order quantity for polyester satin hijabs?

Any MOQ — from 3 metres, or a few sample pieces. 3 m of polyester satin already makes about 1 hijab, so a sample run can be a small batch.

How is the price of polyester satin hijabs worked out?

Competitive per-metre pricing, quoted for your design and quantity. For hijabs, polyester satin sits in the lowest cost band of the bases we print, and ready hijabs add stitching and finishing to the printed fabric.

Polyester satin hijabs by use

Each page sets the size, quantity, finishing and care for one use.

Get a quote for polyester satin hijabs

Send your design, the size and the quantity. We reply with the price and a sample plan.

Up to 3 files, 20 MB each — JPG, PNG, TIFF, PDF, PSD, AI, EPS, CDR or ZIP. Bigger files: send them on WhatsApp.
Or WhatsApp us

HM International

Okhla Industrial, S-73, Sanjay Colony II, Pocket Y, Sanjay Colony, Okhla Phase II, Area, New Delhi, Delhi 110020

+91 98181 98500

Monday10 am – 7 pm
Tuesday10 am – 7 pm
Wednesday10 am – 7 pm
Thursday10 am – 7 pm
Friday10 am – 7 pm
Saturday10 am – 7 pm
SundayClosed
WhatsApp us