Home › Products › Bunting printing › Polyester satin
Polyester satin bunting pennant printing
Bunting pennants on polyester satin by sublimation, Okhla, Delhi: about 120 bunting pennants from 3 m of typical 58-inch polyester satin.
Is polyester satin right for bunting pennants?
Polyester satin suits bunting pennants: it is one of the usual first choices for this job, sublimated colour sits inside the fibre and stands up to sun and wind and it keeps the cost per piece low. Printed with sublimation: the brightest, sharpest colour of all; the dye is inside the fibre, so it cannot crack.
Trade-off: The high sheen can glare under strong light and shows every crease. If that matters, choose polyester spun for a matte look.
Design tips: Plan one pennant per letter or image, in the order the string is hung. On polyester satin, bright, saturated colours and dark grounds look glossy and rich.
Print your own design: send the artwork and the bunting pennant size, and we print a sample on polyester satin before the run. Order the printed fabric only, or ready bunting pennants stitched in-house.

Bunting pennants on polyester satin: size and yield
| Typical finished size | Triangle pennants about 20 x 28 cm, nested point-up and point-down (2 per 22 x 30 cm) |
|---|---|
| On 58-inch fabric (about 143 cm usable) | 120 bunting pennants from 3 m (6 across × 10 down = 60 pieces of 22 × 30 cm; 2 bunting pennants per piece) |
| Fabric for 50 bunting pennants | About 1.5 m of 58-inch fabric, before any extra for samples |
| Weight of fabric used per piece | About 3-4 g per bunting pennant, before trims and packing |
| How it is counted | Pieces are counted on the usable width (fabric width less about 4 cm of selvedge) across a 3 m length, trying both directions. |
| Finishing options | Pennants hemmed or heat-cut, stitched onto tape with tie ends, two-layer pennants |
Polyester satin at a glance
| Hand-feel and drape | Smooth and slippery, with a fluid drape |
|---|---|
| Sheen | High sheen |
| Opacity | Opaque at typical weights |
| Typical weight / width | Typical 90-120 gsm; typical width 58″ |
| How the print looks | Sublimation: The brightest, sharpest colour of all; the dye is inside the fibre, so it cannot crack |
| Care | Cool machine wash; iron on the reverse on low heat |
| Good for | Scarves, scroll invitations, table flags, linings, pooja cloth, cushion covers |
| Not ideal for | Napkins and towels (low absorbency) |
How polyester satin meets what bunting pennants need
| Weight: bunting pennants work on very light to medium-weight fabric | Polyester satin is light, typical 90-120 gsm, inside that range. |
|---|---|
| Opacity: bunting pennants can be sheer | Polyester satin is opaque with room to spare. |
| Outdoors: bunting pennants face sun and wind | Polyester satin is sublimated polyester, so the colour is inside the fibre. |
On 58-inch polyester satin, 6 cut pieces of 22 cm sit across the 143 cm usable width, leaving about 11 cm (8% of the width) as offcut on every row.
Making bunting pennants in polyester satin
Polyester satin is light, so it takes the usual bunting pennant finish without special handling: pennants hemmed or heat-cut. The high-sheen face of polyester satin shifts when cut and shows needle marks, so bunting pennant panels are best cut in single layers and stitched without unpicking. Polyester satin shows creases, so finished bunting pennants are pressed before they are folded and packed.
What the print process means here
Bunting pennants in polyester satin are printed by sublimation, the process for polyester: heat turns the dye to a gas that enters the fibre, so the colour stands up to sun and wind on bunting pennants. Polyester satin is opaque, so the reverse of a bunting pennant stays much paler than the printed face; order a two-layer bunting pennant if both sides must show the design. The high-sheen face deepens dark shades, so dark-ground bunting pennants look richest on polyester satin. Digital printing has no white ink, so any white in a bunting pennant design is the colour of the polyester satin itself.
Polyester satin or peach-finish polyester for bunting pennants?
Against peach-finish polyester, polyester satin for bunting pennants is high-sheen where peach-finish polyester is matte; and fluid in the hand where peach-finish polyester is soft. Pick polyester satin for a glossier and more fluid bunting pennant; pick peach-finish polyester for a more matte and firmer one. See peach-finish polyester bunting pennants.
Other fabrics for bunting pennants
- Peach-finish polyester bunting pennant printing: more matte and firmer than polyester satin, about 120 from 3 m
- Polyester crepe bunting pennant printing: sheerer and more matte than polyester satin, about 120 from 3 m
- Polyester spun bunting pennant printing: heavier and more matte than polyester satin, about 120 from 3 m
- Polyester roto bunting pennant printing: heavier and more matte than polyester satin, about 120 from 3 m
Other products in polyester satin
- Polyester satin fabric label printing: about 851 fabric labels from the 3 m that makes 120 bunting pennants
- Polyester satin nightwear set printing: about 1 nightwear set from the 3 m that makes 120 bunting pennants
- Polyester satin jacket lining printing: about 2 jacket linings from the 3 m that makes 120 bunting pennants
- Polyester satin pooja cloth printing: about 8 pooja cloths from the 3 m that makes 120 bunting pennants
Specification
| Printing process | Sublimation on polyester (two Mimaki printers) |
|---|---|
| Fabrics | Polyester satin |
| Typical fabric weight | Typical 90-120 gsm (typical width 58″) |
| Sizes | Triangle pennants about 20 x 28 cm, nested point-up and point-down (2 per 22 x 30 cm) |
| Order as | Printed fabric only, or the ready finished product, stitched and packed in-house |
| Finishing options | Pennants hemmed or heat-cut, stitched onto tape with tie ends, two-layer pennants |
| Minimum order | From 3 metres of fabric, or a few sample pieces, including finished pieces |
| Turnaround | Sample first; sample and bulk dates are confirmed with your quote |
| Care | Cool machine wash; iron on the reverse on low heat. Bunting pennants spend time outdoors; take polyester satin in from heavy rain and wash off dust in cold water. |
- Any MOQ — from 3 metres, or a few sample pieces
- Competitive per-metre pricing — ask for a quote
- In-house digital printing unit at S-73, Okhla Industrial Area Phase II, New Delhi, since 1996
- In-house tailoring: printed fabric only, or the ready stitched product
Frequently asked questions
Is polyester satin good for bunting pennants?
Polyester satin suits bunting pennants: it is one of the usual first choices for this job, sublimated colour sits inside the fibre and stands up to sun and wind and it keeps the cost per piece low. The high sheen can glare under strong light and shows every crease.
How many bunting pennants can I get from 3 metres of polyester satin?
On 58-inch fabric (about 143 cm usable): 120 bunting pennants from 3 m (6 across × 10 down = 60 pieces of 22 × 30 cm; 2 bunting pennants per piece). Fabric for 50 bunting pennants: about 1.5 m of 58-inch fabric, before any extra for samples. Weight of fabric used per piece: about 3-4 g per bunting pennant, before trims and packing. Sizes and yields are typical; we confirm them with your quote.
Can you deliver ready bunting pennants in polyester satin, or only the printed fabric?
Both: our in-house tailoring stitches the bunting pennants, or you take the printed polyester satin only. Polyester satin is light, so it takes the usual bunting pennant finish without special handling: pennants hemmed or heat-cut. The high-sheen face of polyester satin shifts when cut and shows needle marks, so bunting pennant panels are best cut in single layers and stitched without unpicking.
How do I wash a printed polyester satin bunting pennant?
Cool machine wash; iron on the reverse on low heat. Bunting pennants spend time outdoors; take polyester satin in from heavy rain and wash off dust in cold water. Sublimated colour is inside the polyester fibre, so it does not crack or peel.
What can I use instead of polyester satin for bunting pennants?
Polyester spun, for a matte look. Polyester spun is medium weight, soft and cotton-like.
How does polyester satin compare with polyester crepe for bunting pennants?
Against polyester crepe, polyester satin for bunting pennants is opaque where polyester crepe is semi-opaque; and high-sheen where polyester crepe is matte. Pick polyester satin for a more opaque and glossier bunting pennant; pick polyester crepe for a sheerer and more matte one.
What is the minimum order quantity for polyester satin bunting pennants?
Any MOQ — from 3 metres, or a few sample pieces. 3 m of polyester satin already makes about 120 bunting pennants, so a sample run can be a small batch.
How is the price of polyester satin bunting pennants worked out?
Competitive per-metre pricing, quoted for your design and quantity. For bunting pennants, polyester satin sits in the lowest cost band of the bases we print, and ready bunting pennants add stitching and finishing to the printed fabric.
Polyester satin bunting pennants by use
Each page sets the size, quantity, finishing and care for one use.
Questions about bunting and polyester satin
Get a quote for polyester satin bunting pennants
Send your design, the size and the quantity. We reply with the price and a sample plan.
HM International
Okhla Industrial, S-73, Sanjay Colony II, Pocket Y, Sanjay Colony, Okhla Phase II, Area, New Delhi, Delhi 110020
| Monday | 10 am – 7 pm |
| Tuesday | 10 am – 7 pm |
| Wednesday | 10 am – 7 pm |
| Thursday | 10 am – 7 pm |
| Friday | 10 am – 7 pm |
| Saturday | 10 am – 7 pm |
| Sunday | Closed |