Mon–Sat 10 am – 7 pm · Okhla Phase II, New Delhi +91 98181 98500 · info@skyfashion.in

Home › Products › Fabric label printing › Polyester satin

Polyester satin fabric label printing

Fabric labels on polyester satin by sublimation, Okhla, Delhi: about 851 fabric labels from 3 m of typical 58-inch polyester satin.

Is polyester satin right for fabric labels?

Polyester satin suits fabric labels: it is one of the usual first choices for this job and it keeps the cost per piece low. Printed with sublimation: the brightest, sharpest colour of all; the dye is inside the fibre, so it cannot crack.

Trade-off: It is at the light end for fabric labels, so choose a heavier base for hard daily use.

Design tips: Keep text at least 6 pt and allow a 5 mm fold at each end. On polyester satin, bright, saturated colours and dark grounds look glossy and rich.

Print your own design: send the artwork and the fabric label size, and we print a sample on polyester satin before the run. Order the printed fabric only, or ready fabric labels stitched in-house.

WhatsApp your designOr use the form

Printed satin scarf with a glossy finish

Fabric labels on polyester satin: size and yield

Typical finished sizeAbout 5 x 7 cm (cut 6 x 8 cm with seam fold), or your size
On 58-inch fabric (about 143 cm usable)851 fabric labels from 3 m (23 across × 37 down = 851 pieces of 6 × 8 cm)
Fabric for 50 fabric labelsAbout 0.2 m of 58-inch fabric, before any extra for samples
Weight of fabric used per pieceAbout 0-1 g per fabric label, before trims and packing
How it is countedPieces are counted on the usable width (fabric width less about 4 cm of selvedge) across a 3 m length, trying both directions.
Finishing optionsCut and folded labels (end-fold or centre-fold), or printed strips on the roll

Polyester satin at a glance

Hand-feel and drapeSmooth and slippery, with a fluid drape
SheenHigh sheen
OpacityOpaque at typical weights
Typical weight / widthTypical 90-120 gsm; typical width 58″
How the print looksSublimation: The brightest, sharpest colour of all; the dye is inside the fibre, so it cannot crack
CareCool machine wash; iron on the reverse on low heat
Good forScarves, scroll invitations, table flags, linings, pooja cloth, cushion covers
Not ideal forNapkins and towels (low absorbency)

How polyester satin meets what fabric labels need

Weight: fabric labels work on light to heavy fabricPolyester satin is light, typical 90-120 gsm, at the light end of that range.
Opacity: fabric labels need an opaque fabricPolyester satin is opaque.

On 58-inch polyester satin, 23 cut pieces of 6 cm sit across the 143 cm usable width, leaving about 5 cm (3% of the width) as offcut on every row.

Making fabric labels in polyester satin

Polyester satin is light, so it takes the usual fabric label finish without special handling: cut and folded labels (end-fold or centre-fold). The high-sheen face of polyester satin shifts when cut and shows needle marks, so fabric label panels are best cut in single layers and stitched without unpicking. Polyester satin shows creases, so finished fabric labels are pressed before they are folded and packed.

What the print process means here

Fabric labels in polyester satin are printed by sublimation, the process for polyester: heat turns the dye to a gas that enters the fibre, so nothing sits on the surface to crack when the fabric label is folded. Polyester satin is opaque, so the reverse of a fabric label stays much paler than the printed face. The high-sheen face deepens dark shades, so dark-ground fabric labels look richest on polyester satin. Digital printing has no white ink, so any white in a fabric label design is the colour of the polyester satin itself.

Polyester satin or cotton poplin for fabric labels?

Against cotton poplin, polyester satin for fabric labels is high-sheen where cotton poplin is matte; fluid in the hand where cotton poplin is crisp; polyester where cotton poplin is cotton; easy-care polyester (cool machine wash, dries fast) where cotton poplin is machine-washable; and lower in cost. Pick polyester satin for a glossier and more fluid fabric label; pick cotton poplin for a more matte and crisper one. See cotton poplin fabric labels.

Other fabrics for fabric labels

Other products in polyester satin

Specification

Printing processSublimation on polyester (two Mimaki printers)
FabricsPolyester satin
Typical fabric weightTypical 90-120 gsm (typical width 58″)
SizesAbout 5 x 7 cm (cut 6 x 8 cm with seam fold), or your size
Order asPrinted fabric only, or the ready finished product, stitched and packed in-house
Finishing optionsCut and folded labels (end-fold or centre-fold), or printed strips on the roll
Minimum orderFrom 3 metres of fabric, or a few sample pieces, including finished pieces
TurnaroundSample first; sample and bulk dates are confirmed with your quote
CareCool machine wash; iron on the reverse on low heat. Fabric labels in polyester satin wash cool, dry fast and need little ironing.
  • Any MOQ — from 3 metres, or a few sample pieces
  • Competitive per-metre pricing — ask for a quote
  • In-house digital printing unit at S-73, Okhla Industrial Area Phase II, New Delhi, since 1996
  • In-house tailoring: printed fabric only, or the ready stitched product

Frequently asked questions

Is polyester satin good for fabric labels?

Polyester satin suits fabric labels: it is one of the usual first choices for this job and it keeps the cost per piece low. It is at the light end for fabric labels, so choose a heavier base for hard daily use.

How many fabric labels can I get from 3 metres of polyester satin?

On 58-inch fabric (about 143 cm usable): 851 fabric labels from 3 m (23 across × 37 down = 851 pieces of 6 × 8 cm). Fabric for 50 fabric labels: about 0.2 m of 58-inch fabric, before any extra for samples. Weight of fabric used per piece: about 0-1 g per fabric label, before trims and packing. Sizes and yields are typical; we confirm them with your quote.

Can you deliver ready fabric labels in polyester satin, or only the printed fabric?

Both: our in-house tailoring stitches the fabric labels, or you take the printed polyester satin only. Polyester satin is light, so it takes the usual fabric label finish without special handling: cut and folded labels (end-fold or centre-fold). The high-sheen face of polyester satin shifts when cut and shows needle marks, so fabric label panels are best cut in single layers and stitched without unpicking.

How do I wash a printed polyester satin fabric label?

Cool machine wash; iron on the reverse on low heat. Fabric labels in polyester satin wash cool, dry fast and need little ironing. Sublimated colour is inside the polyester fibre, so it does not crack or peel.

What is the minimum order quantity for polyester satin fabric labels?

Any MOQ — from 3 metres, or a few sample pieces. 3 m of polyester satin already makes about 851 fabric labels, so a sample run can be a small batch.

How is the price of polyester satin fabric labels worked out?

Competitive per-metre pricing, quoted for your design and quantity. For fabric labels, polyester satin sits in the lowest cost band of the bases we print, and ready fabric labels add stitching and finishing to the printed fabric.

Polyester satin fabric labels by use

Each page sets the size, quantity, finishing and care for one use.

Get a quote for polyester satin fabric labels

Send your design, the size and the quantity. We reply with the price and a sample plan.

Up to 3 files, 20 MB each — JPG, PNG, TIFF, PDF, PSD, AI, EPS, CDR or ZIP. Bigger files: send them on WhatsApp.
Or WhatsApp us

HM International

Okhla Industrial, S-73, Sanjay Colony II, Pocket Y, Sanjay Colony, Okhla Phase II, Area, New Delhi, Delhi 110020

+91 98181 98500

Monday10 am – 7 pm
Tuesday10 am – 7 pm
Wednesday10 am – 7 pm
Thursday10 am – 7 pm
Friday10 am – 7 pm
Saturday10 am – 7 pm
SundayClosed
WhatsApp us