Mon–Sat 10 am – 7 pm · Okhla Phase II, New Delhi +91 98181 98500 · info@skyfashion.in

Home › Products › Bunting printing › Polyester roto

Polyester roto bunting pennant printing

Bunting pennants on polyester roto by sublimation, Okhla, Delhi: about 120 bunting pennants from 3 m of typical 58-inch polyester roto.

Is polyester roto right for bunting pennants?

Polyester roto suits bunting pennants: sublimated colour sits inside the fibre and stands up to sun and wind and it keeps the cost per piece low. Printed with sublimation: bright colour on a cotton-look surface.

Trade-off: It is at the heavy end for bunting pennants: more body, but stiffer to stitch and fold. If that matters, choose polyester satin for a lighter, softer piece.

Design tips: Plan one pennant per letter or image, in the order the string is hung. On polyester roto, logos, stripes and bright repeats print crisp and even.

Print your own design: send the artwork and the bunting pennant size, and we print a sample on polyester roto before the run. Order the printed fabric only, or ready bunting pennants stitched in-house.

WhatsApp your designOr use the form

Swirl design printing on polyester fabric

Bunting pennants on polyester roto: size and yield

Typical finished sizeTriangle pennants about 20 x 28 cm, nested point-up and point-down (2 per 22 x 30 cm)
On 44-inch fabric (about 108 cm usable)80 bunting pennants from 3 m (4 across × 10 down = 40 pieces of 22 × 30 cm; 2 bunting pennants per piece)
On 58-inch fabric (about 143 cm usable)120 bunting pennants from 3 m (6 across × 10 down = 60 pieces of 22 × 30 cm; 2 bunting pennants per piece)
Fabric for 50 bunting pennantsAbout 1.5 m of 58-inch fabric, before any extra for samples
How it is countedPieces are counted on the usable width (fabric width less about 4 cm of selvedge) across a 3 m length, trying both directions.
Finishing optionsPennants hemmed or heat-cut, stitched onto tape with tie ends, two-layer pennants

Polyester roto at a glance

Hand-feel and drapeMedium weight, with a cotton-like, slightly crisp feel
SheenMatte
OpacityOpaque
Typical weight / widthTypical medium weight; typical width 44-58″
How the print looksSublimation: Bright colour on a cotton-look surface
CareMachine wash; dries quickly, needs little ironing
Good forUniforms, shirts, aprons, backdrops
Not ideal forFluid drapes

How polyester roto meets what bunting pennants need

Weight: bunting pennants work on very light to medium-weight fabricPolyester roto is medium-weight, typical medium weight, at the heavy end of that range.
Opacity: bunting pennants can be sheerPolyester roto is opaque with room to spare.
Outdoors: bunting pennants face sun and windPolyester roto is sublimated polyester, so the colour is inside the fibre.

On 58-inch polyester roto, 6 cut pieces of 22 cm sit across the 143 cm usable width, leaving about 11 cm (8% of the width) as offcut on every row.

Making bunting pennants in polyester roto

Polyester roto is medium-weight, so it takes the usual bunting pennant finish without special handling: pennants hemmed or heat-cut.

What the print process means here

Bunting pennants in polyester roto are printed by sublimation, the process for polyester: heat turns the dye to a gas that enters the fibre, so the colour stands up to sun and wind on bunting pennants. Polyester roto is opaque, so the reverse of a bunting pennant stays much paler than the printed face; order a two-layer bunting pennant if both sides must show the design. Digital printing has no white ink, so any white in a bunting pennant design is the colour of the polyester roto itself.

Polyester roto or polyester spun for bunting pennants?

Against polyester spun, polyester roto for bunting pennants is crisp in the hand where polyester spun is soft. Pick polyester roto for a crisper bunting pennant; pick polyester spun for a softer one. See polyester spun bunting pennants.

Other fabrics for bunting pennants

Other products in polyester roto

Specification

Printing processSublimation on polyester (two Mimaki printers)
FabricsPolyester roto
Typical fabric weightTypical medium weight (typical width 44-58″)
SizesTriangle pennants about 20 x 28 cm, nested point-up and point-down (2 per 22 x 30 cm)
Order asPrinted fabric only, or the ready finished product, stitched and packed in-house
Finishing optionsPennants hemmed or heat-cut, stitched onto tape with tie ends, two-layer pennants
Minimum orderFrom 3 metres of fabric, or a few sample pieces, including finished pieces
TurnaroundSample first; sample and bulk dates are confirmed with your quote
CareMachine wash; dries quickly, needs little ironing. Bunting pennants spend time outdoors; take polyester roto in from heavy rain and wash off dust in cold water.
  • Any MOQ — from 3 metres, or a few sample pieces
  • Competitive per-metre pricing — ask for a quote
  • In-house digital printing unit at S-73, Okhla Industrial Area Phase II, New Delhi, since 1996
  • In-house tailoring: printed fabric only, or the ready stitched product

Frequently asked questions

Is polyester roto good for bunting pennants?

Polyester roto suits bunting pennants: sublimated colour sits inside the fibre and stands up to sun and wind and it keeps the cost per piece low. It is at the heavy end for bunting pennants: more body, but stiffer to stitch and fold.

How many bunting pennants can I get from 3 metres of polyester roto?

On 44-inch fabric (about 108 cm usable): 80 bunting pennants from 3 m (4 across × 10 down = 40 pieces of 22 × 30 cm; 2 bunting pennants per piece). On 58-inch fabric (about 143 cm usable): 120 bunting pennants from 3 m (6 across × 10 down = 60 pieces of 22 × 30 cm; 2 bunting pennants per piece). Fabric for 50 bunting pennants: about 1.5 m of 58-inch fabric, before any extra for samples. Sizes and yields are typical; we confirm them with your quote.

Can you deliver ready bunting pennants in polyester roto, or only the printed fabric?

Both: our in-house tailoring stitches the bunting pennants, or you take the printed polyester roto only. Polyester roto is medium-weight, so it takes the usual bunting pennant finish without special handling: pennants hemmed or heat-cut.

How do I wash a printed polyester roto bunting pennant?

Machine wash; dries quickly, needs little ironing. Bunting pennants spend time outdoors; take polyester roto in from heavy rain and wash off dust in cold water. Sublimated colour is inside the polyester fibre, so it does not crack or peel.

What can I use instead of polyester roto for bunting pennants?

Polyester satin, for a lighter, softer piece. Polyester satin is smooth and slippery, with a fluid drape.

How does polyester roto compare with peach-finish polyester for bunting pennants?

Against peach-finish polyester, polyester roto for bunting pennants is heavier (typical medium weight against 80-120 gsm); and crisp in the hand where peach-finish polyester is soft. Pick polyester roto for a heavier and crisper bunting pennant; pick peach-finish polyester for a lighter and softer one.

What is the minimum order quantity for polyester roto bunting pennants?

Any MOQ — from 3 metres, or a few sample pieces. 3 m of polyester roto already makes about 120 bunting pennants, so a sample run can be a small batch.

How is the price of polyester roto bunting pennants worked out?

Competitive per-metre pricing, quoted for your design and quantity. For bunting pennants, polyester roto sits in the lowest cost band of the bases we print, and ready bunting pennants add stitching and finishing to the printed fabric.

Get a quote for polyester roto bunting pennants

Send your design, the size and the quantity. We reply with the price and a sample plan.

Up to 3 files, 20 MB each — JPG, PNG, TIFF, PDF, PSD, AI, EPS, CDR or ZIP. Bigger files: send them on WhatsApp.
Or WhatsApp us

HM International

Okhla Industrial, S-73, Sanjay Colony II, Pocket Y, Sanjay Colony, Okhla Phase II, Area, New Delhi, Delhi 110020

+91 98181 98500

Monday10 am – 7 pm
Tuesday10 am – 7 pm
Wednesday10 am – 7 pm
Thursday10 am – 7 pm
Friday10 am – 7 pm
Saturday10 am – 7 pm
SundayClosed
WhatsApp us