Home › Products › Cloth gift wrap printing › Polyester satin
Polyester satin furoshiki printing
Furoshiki cloths on polyester satin by sublimation, Okhla, Delhi: about 4 furoshiki cloths from 3 m of typical 58-inch polyester satin.
Is polyester satin right for furoshiki cloths?
Polyester satin suits furoshiki cloths: it falls in fluid folds and it keeps the cost per piece low. Printed with sublimation: the brightest, sharpest colour of all; the dye is inside the fibre, so it cannot crack.
Trade-off: The high sheen can glare under strong light and shows every crease. If that matters, choose cotton cambric for a matte look.
Design tips: Put a motif in each corner: the corners are tied into the knot and show on top. On polyester satin, bright, saturated colours and dark grounds look glossy and rich.
Print your own design: send the artwork and the furoshiki size, and we print a sample on polyester satin before the run. Order the printed fabric only, or ready furoshiki cloths stitched in-house.

Furoshiki cloths on polyester satin: size and yield
| Typical finished size | 70 x 70 cm (cut 72 cm); 50 cm and 90 cm squares |
|---|---|
| On 58-inch fabric (about 143 cm usable) | 4 furoshiki cloths from 3 m (1 across × 4 down = 4 pieces of 72 × 72 cm) |
| Fabric for 10 furoshiki cloths | About 7.2 m of 58-inch fabric, before any extra for samples |
| Weight of fabric used per piece | About 47-62 g per furoshiki, before trims and packing |
| How it is counted | Pieces are counted on the usable width (fabric width less about 4 cm of selvedge) across a 3 m length, trying both directions. |
| Finishing options | Rolled or narrow hems, packed flat |
Polyester satin at a glance
| Hand-feel and drape | Smooth and slippery, with a fluid drape |
|---|---|
| Sheen | High sheen |
| Opacity | Opaque at typical weights |
| Typical weight / width | Typical 90-120 gsm; typical width 58″ |
| How the print looks | Sublimation: The brightest, sharpest colour of all; the dye is inside the fibre, so it cannot crack |
| Care | Cool machine wash; iron on the reverse on low heat |
| Good for | Scarves, scroll invitations, table flags, linings, pooja cloth, cushion covers |
| Not ideal for | Napkins and towels (low absorbency) |
How polyester satin meets what furoshiki cloths need
| Weight: furoshiki cloths work on very light to medium-weight fabric | Polyester satin is light, typical 90-120 gsm, inside that range. |
|---|---|
| Opacity: furoshiki cloths need at least a semi-opaque fabric | Polyester satin is opaque with room to spare. |
| Drape: furoshiki cloths handle best in a soft or fluid fabric | Polyester satin is fluid, a match. |
On 58-inch polyester satin, 1 cut piece of 72 cm sit across the 143 cm usable width, leaving about 71 cm (50% of the width) as offcut on every row.
Making furoshiki cloths in polyester satin
Polyester satin is light, so it takes the usual furoshiki finish without special handling: rolled or narrow hems. The high-sheen face of polyester satin shifts when cut and shows needle marks, so furoshiki panels are best cut in single layers and stitched without unpicking. Polyester satin shows creases, so finished furoshiki cloths are pressed before they are folded and packed.
What the print process means here
Furoshiki cloths in polyester satin are printed by sublimation, the process for polyester: heat turns the dye to a gas that enters the fibre, so nothing sits on the surface to crack when the furoshiki is folded. Polyester satin is opaque, so the reverse of a furoshiki stays much paler than the printed face. The high-sheen face deepens dark shades, so dark-ground furoshiki cloths look richest on polyester satin. Digital printing has no white ink, so any white in a furoshiki design is the colour of the polyester satin itself.
Polyester satin or peach-finish polyester for furoshiki cloths?
Against peach-finish polyester, polyester satin for furoshiki cloths is high-sheen where peach-finish polyester is matte; and fluid in the hand where peach-finish polyester is soft. Pick polyester satin for a glossier and more fluid furoshiki; pick peach-finish polyester for a more matte and firmer one. See peach-finish polyester furoshiki cloths.
Other fabrics for furoshiki cloths
- Peach-finish polyester furoshiki printing: more matte and firmer than polyester satin, about 4 from 3 m
- Polyester crepe furoshiki printing: sheerer and more matte than polyester satin, about 4 from 3 m
- Silk satin furoshiki printing: sheerer than polyester satin, about 4 from 3 m
- Polyester spun furoshiki printing: heavier and more matte than polyester satin, about 4 from 3 m
Other products in polyester satin
- Polyester satin hijab printing: about 1 hijab from the 3 m that makes 4 furoshiki cloths
- Polyester satin costume printing: about 1 costume from the 3 m that makes 4 furoshiki cloths
- Polyester satin scarf printing: about 3 scarves from the 3 m that makes 4 furoshiki cloths
- Polyester satin flag printing: about 6 flags from the 3 m that makes 4 furoshiki cloths
Specification
| Printing process | Sublimation on polyester (two Mimaki printers) |
|---|---|
| Fabrics | Polyester satin |
| Typical fabric weight | Typical 90-120 gsm (typical width 58″) |
| Sizes | 70 x 70 cm (cut 72 cm); 50 cm and 90 cm squares |
| Order as | Printed fabric only, or the ready finished product, stitched and packed in-house |
| Finishing options | Rolled or narrow hems, packed flat |
| Minimum order | From 3 metres of fabric, or a few sample pieces, including finished pieces |
| Turnaround | Sample first; sample and bulk dates are confirmed with your quote |
| Care | Cool machine wash; iron on the reverse on low heat. Furoshiki cloths in polyester satin wash cool, dry fast and need little ironing. |
- Any MOQ — from 3 metres, or a few sample pieces
- Competitive per-metre pricing — ask for a quote
- In-house digital printing unit at S-73, Okhla Industrial Area Phase II, New Delhi, since 1996
- In-house tailoring: printed fabric only, or the ready stitched product
Frequently asked questions
Is polyester satin good for furoshiki cloths?
Polyester satin suits furoshiki cloths: it falls in fluid folds and it keeps the cost per piece low. The high sheen can glare under strong light and shows every crease.
How many furoshiki cloths can I get from 3 metres of polyester satin?
On 58-inch fabric (about 143 cm usable): 4 furoshiki cloths from 3 m (1 across × 4 down = 4 pieces of 72 × 72 cm). Fabric for 10 furoshiki cloths: about 7.2 m of 58-inch fabric, before any extra for samples. Weight of fabric used per piece: about 47-62 g per furoshiki, before trims and packing. Sizes and yields are typical; we confirm them with your quote.
Can you deliver ready furoshiki cloths in polyester satin, or only the printed fabric?
Both: our in-house tailoring stitches the furoshiki cloths, or you take the printed polyester satin only. Polyester satin is light, so it takes the usual furoshiki finish without special handling: rolled or narrow hems. The high-sheen face of polyester satin shifts when cut and shows needle marks, so furoshiki panels are best cut in single layers and stitched without unpicking.
How do I wash a printed polyester satin furoshiki?
Cool machine wash; iron on the reverse on low heat. Furoshiki cloths in polyester satin wash cool, dry fast and need little ironing. Sublimated colour is inside the polyester fibre, so it does not crack or peel.
What can I use instead of polyester satin for furoshiki cloths?
Cotton cambric, for a matte look. Cotton cambric is light, fine and soft; a little softer than poplin.
How does polyester satin compare with polyester crepe for furoshiki cloths?
Against polyester crepe, polyester satin for furoshiki cloths is opaque where polyester crepe is semi-opaque; and high-sheen where polyester crepe is matte. Pick polyester satin for a more opaque and glossier furoshiki; pick polyester crepe for a sheerer and more matte one.
What is the minimum order quantity for polyester satin furoshiki cloths?
Any MOQ — from 3 metres, or a few sample pieces. 3 m of polyester satin already makes about 4 furoshiki cloths, so a sample run can be a small batch.
How is the price of polyester satin furoshiki cloths worked out?
Competitive per-metre pricing, quoted for your design and quantity. For furoshiki cloths, polyester satin sits in the lowest cost band of the bases we print, and ready furoshiki cloths add stitching and finishing to the printed fabric.
Polyester satin furoshiki cloths by use
Each page sets the size, quantity, finishing and care for one use.
Questions about cloth gift wrap and polyester satin
Get a quote for polyester satin furoshiki cloths
Send your design, the size and the quantity. We reply with the price and a sample plan.
HM International
Okhla Industrial, S-73, Sanjay Colony II, Pocket Y, Sanjay Colony, Okhla Phase II, Area, New Delhi, Delhi 110020
| Monday | 10 am – 7 pm |
| Tuesday | 10 am – 7 pm |
| Wednesday | 10 am – 7 pm |
| Thursday | 10 am – 7 pm |
| Friday | 10 am – 7 pm |
| Saturday | 10 am – 7 pm |
| Sunday | Closed |