Mon–Sat 10 am – 7 pm · Okhla Phase II, New Delhi +91 98181 98500 · info@skyfashion.in

Home › Products › Cloth gift wrap printing › Silk satin

Silk satin furoshiki printing

Furoshiki cloths on silk satin by reactive dyes, Okhla, Delhi: about 4 furoshiki cloths from 3 m of typical 44-inch silk satin.

Is silk satin right for furoshiki cloths?

Silk satin suits furoshiki cloths: it falls in fluid folds. Printed with reactive dyes: the most luminous colour we print; the sheen deepens dark shades.

Trade-off: Silk costs more and needs gentle care, which is a lot to ask of an everyday furoshiki. If that matters, choose cotton cambric for a lower cost per piece.

Design tips: Put a motif in each corner: the corners are tied into the knot and show on top. On silk satin, dark grounds, jewel tones and photographic prints glow; very pale designs lose the sheen effect.

Print your own design: send the artwork and the furoshiki size, and we print a sample on silk satin before the run. Order the printed fabric only, or ready furoshiki cloths stitched in-house.

WhatsApp your designOr use the form

Printed satin scarf with a glossy finish

Furoshiki cloths on silk satin: size and yield

Typical finished size70 x 70 cm (cut 72 cm); 50 cm and 90 cm squares
On 44-inch fabric (about 108 cm usable)4 furoshiki cloths from 3 m (1 across × 4 down = 4 pieces of 72 × 72 cm)
Fabric for 10 furoshiki clothsAbout 7.2 m of 44-inch fabric, before any extra for samples
Weight of fabric used per pieceAbout 36-49 g per furoshiki (16-22 momme ≈ 69-95 gsm), before trims and packing
How it is countedPieces are counted on the usable width (fabric width less about 4 cm of selvedge) across a 3 m length, trying both directions.
Finishing optionsRolled or narrow hems, packed flat

Silk satin at a glance

Hand-feel and drapeHeavy, fluid silk with a slippery face
SheenHigh lustre
OpacitySemi-opaque
Typical weight / widthTypical 16-22 momme; typical width 44″
How the print looksReactive: The most luminous colour we print; the sheen deepens dark shades
CareDry clean
Good forLuxury scarves, sarees, pocket squares, ties, scroll invitations
Not ideal forBudget runs, and items washed at home often

How silk satin meets what furoshiki cloths need

Weight: furoshiki cloths work on very light to medium-weight fabricSilk satin is light, typical 16-22 momme (about 69-95 gsm), inside that range.
Opacity: furoshiki cloths need at least a semi-opaque fabricSilk satin is semi-opaque.
Drape: furoshiki cloths handle best in a soft or fluid fabricSilk satin is fluid, a match.

On 44-inch silk satin, 1 cut piece of 72 cm sit across the 108 cm usable width, leaving about 36 cm (33% of the width) as offcut on every row.

Making furoshiki cloths in silk satin

Silk satin is light, so it takes the usual furoshiki finish without special handling: rolled or narrow hems. The high-sheen face of silk satin shifts when cut and shows needle marks, so furoshiki panels are best cut in single layers and stitched without unpicking. Silk satin shows creases, so finished furoshiki cloths are pressed before they are folded and packed.

What the print process means here

Furoshiki cloths in silk satin are printed with reactive dyes, because silk satin is silk, a protein fibre; the dye bonds to the fibre, and the fabric is then steamed and washed off, so the hand of the furoshiki stays soft with no coating on top. Silk satin is semi-opaque, so the design shows faintly on the back of a furoshiki. The high-sheen face deepens dark shades, so dark-ground furoshiki cloths look richest on silk satin. Digital printing has no white ink, so any white in a furoshiki design is the colour of the silk satin itself.

Silk satin or silk twill for furoshiki cloths?

Against silk twill, silk satin for furoshiki cloths is high-sheen where silk twill is softly lustrous; and fluid in the hand where silk twill is soft. Pick silk satin for a glossier and more fluid furoshiki; pick silk twill for a more matte and firmer one. See silk twill furoshiki cloths.

Other fabrics for furoshiki cloths

Other products in silk satin

Specification

Printing processReactive digital printing (steam fixed, washed off)
FabricsSilk satin / charmeuse
Typical fabric weightTypical 16-22 momme (typical width 44″)
Sizes70 x 70 cm (cut 72 cm); 50 cm and 90 cm squares
Order asPrinted fabric only, or the ready finished product, stitched and packed in-house
Finishing optionsRolled or narrow hems, packed flat
Minimum orderFrom 3 metres of fabric, or a few sample pieces, including finished pieces
TurnaroundSample first; sample and bulk dates are confirmed with your quote
CareDry clean. Furoshiki cloths in silk satin keep their colour longest when dry cleaned and stored folded, out of direct sun.
  • Any MOQ — from 3 metres, or a few sample pieces
  • Competitive per-metre pricing — ask for a quote
  • In-house digital printing unit at S-73, Okhla Industrial Area Phase II, New Delhi, since 1996
  • In-house tailoring: printed fabric only, or the ready stitched product

Frequently asked questions

Is silk satin good for furoshiki cloths?

Silk satin suits furoshiki cloths: it falls in fluid folds. Silk costs more and needs gentle care, which is a lot to ask of an everyday furoshiki.

How many furoshiki cloths can I get from 3 metres of silk satin?

On 44-inch fabric (about 108 cm usable): 4 furoshiki cloths from 3 m (1 across × 4 down = 4 pieces of 72 × 72 cm). Fabric for 10 furoshiki cloths: about 7.2 m of 44-inch fabric, before any extra for samples. Weight of fabric used per piece: about 36-49 g per furoshiki (16-22 momme ≈ 69-95 gsm), before trims and packing. Sizes and yields are typical; we confirm them with your quote.

Can you deliver ready furoshiki cloths in silk satin, or only the printed fabric?

Both: our in-house tailoring stitches the furoshiki cloths, or you take the printed silk satin only. Silk satin is light, so it takes the usual furoshiki finish without special handling: rolled or narrow hems. The high-sheen face of silk satin shifts when cut and shows needle marks, so furoshiki panels are best cut in single layers and stitched without unpicking.

How do I wash a printed silk satin furoshiki?

Dry clean. Furoshiki cloths in silk satin keep their colour longest when dry cleaned and stored folded, out of direct sun. Reactive colour is fixed by steaming and washing-off, so it is wash-fast; the fibre decides the care.

What can I use instead of silk satin for furoshiki cloths?

Cotton cambric, for a lower cost per piece. Cotton cambric is light, fine and soft; a little softer than poplin.

How does silk satin compare with silk crepe for furoshiki cloths?

Against silk crepe, silk satin for furoshiki cloths is high-sheen where silk crepe is matte. Pick silk satin for a glossier furoshiki; pick silk crepe for a more matte one.

What is the minimum order quantity for silk satin furoshiki cloths?

Any MOQ — from 3 metres, or a few sample pieces. 3 m of silk satin already makes about 4 furoshiki cloths, so a sample run can be a small batch.

How is the price of silk satin furoshiki cloths worked out?

Competitive per-metre pricing, quoted for your design and quantity. For furoshiki cloths, silk satin sits in the highest cost band of the bases we print, and ready furoshiki cloths add stitching and finishing to the printed fabric.

Silk satin furoshiki cloths by use

Each page sets the size, quantity, finishing and care for one use.

Get a quote for silk satin furoshiki cloths

Send your design, the size and the quantity. We reply with the price and a sample plan.

Up to 3 files, 20 MB each — JPG, PNG, TIFF, PDF, PSD, AI, EPS, CDR or ZIP. Bigger files: send them on WhatsApp.
Or WhatsApp us

HM International

Okhla Industrial, S-73, Sanjay Colony II, Pocket Y, Sanjay Colony, Okhla Phase II, Area, New Delhi, Delhi 110020

+91 98181 98500

Monday10 am – 7 pm
Tuesday10 am – 7 pm
Wednesday10 am – 7 pm
Thursday10 am – 7 pm
Friday10 am – 7 pm
Saturday10 am – 7 pm
SundayClosed
WhatsApp us