Mon–Sat 10 am – 7 pm · Okhla Phase II, New Delhi +91 98181 98500 · info@skyfashion.in

Home › Products › Cloth gift wrap printing › Cotton cambric

Cotton cambric furoshiki printing

Furoshiki cloths on cotton cambric by reactive dyes, Okhla, Delhi: about 4 furoshiki cloths from 3 m of typical 58-inch cotton cambric.

Is cotton cambric right for furoshiki cloths?

Cotton cambric suits furoshiki cloths: it is one of the usual first choices for this job and it is soft and easy to handle. Printed with reactive dyes: soft hand with crisp small florals and fine lines.

Trade-off: It is light, so pale colours can show what is underneath. If that matters, choose cotton poplin for an opaque piece.

Design tips: Put a motif in each corner: the corners are tied into the knot and show on top. On cotton cambric, small florals and fine line work look crisp; keep very pale grounds for lined pieces.

Print your own design: send the artwork and the furoshiki size, and we print a sample on cotton cambric before the run. Order the printed fabric only, or ready furoshiki cloths stitched in-house.

WhatsApp your designOr use the form

Floral print sample on fabric

Furoshiki cloths on cotton cambric: size and yield

Typical finished size70 x 70 cm (cut 72 cm); 50 cm and 90 cm squares
On 44-inch fabric (about 108 cm usable)4 furoshiki cloths from 3 m (1 across × 4 down = 4 pieces of 72 × 72 cm)
On 58-inch fabric (about 143 cm usable)4 furoshiki cloths from 3 m (1 across × 4 down = 4 pieces of 72 × 72 cm)
Fabric for 10 furoshiki clothsAbout 7.2 m of 58-inch fabric, before any extra for samples
Weight of fabric used per pieceAbout 41-52 g per furoshiki, before trims and packing
How it is countedPieces are counted on the usable width (fabric width less about 4 cm of selvedge) across a 3 m length, trying both directions.
Finishing optionsRolled or narrow hems, packed flat

Cotton cambric at a glance

Hand-feel and drapeLight, fine and soft; a little softer than poplin
SheenMatte
OpacitySemi-opaque; pale garments may need a lining
Typical weight / widthTypical 80-100 gsm; typical width 44-58″
How the print looksReactive: Soft hand with crisp small florals and fine lines
CareMachine wash cool on a gentle cycle
Good forKurtis, kidswear, nightwear, pocket squares, handkerchiefs
Not ideal forBags and upholstery (too light)

How cotton cambric meets what furoshiki cloths need

Weight: furoshiki cloths work on very light to medium-weight fabricCotton cambric is light, typical 80-100 gsm, inside that range.
Opacity: furoshiki cloths need at least a semi-opaque fabricCotton cambric is semi-opaque.
Drape: furoshiki cloths handle best in a soft or fluid fabricCotton cambric is soft, a match.

On 58-inch cotton cambric, 1 cut piece of 72 cm sit across the 143 cm usable width, leaving about 71 cm (50% of the width) as offcut on every row.

Making furoshiki cloths in cotton cambric

Cotton cambric is light, so it takes the usual furoshiki finish without special handling: rolled or narrow hems.

What the print process means here

Furoshiki cloths in cotton cambric are printed with reactive dyes, because cotton cambric is cotton, a cellulose fibre; the dye bonds to the fibre, and the fabric is then steamed and washed off, so the hand of the furoshiki stays soft with no coating on top. Cotton cambric is semi-opaque, so the design shows faintly on the back of a furoshiki. Digital printing has no white ink, so any white in a furoshiki design is the colour of the cotton cambric itself.

Cotton cambric or rayon crepe for furoshiki cloths?

Against rayon crepe, cotton cambric for furoshiki cloths is soft in the hand where rayon crepe is fluid; and machine-washable where rayon crepe is a gentle-wash fibre (weaker when wet). Pick cotton cambric for a firmer and easier-care furoshiki; pick rayon crepe for a more fluid one. See rayon crepe furoshiki cloths.

Other fabrics for furoshiki cloths

Other products in cotton cambric

Specification

Printing processReactive digital printing (steam fixed, washed off)
FabricsCotton cambric
Typical fabric weightTypical 80-100 gsm (typical width 44-58″)
Sizes70 x 70 cm (cut 72 cm); 50 cm and 90 cm squares
Order asPrinted fabric only, or the ready finished product, stitched and packed in-house
Finishing optionsRolled or narrow hems, packed flat
Minimum orderFrom 3 metres of fabric, or a few sample pieces, including finished pieces
TurnaroundSample first; sample and bulk dates are confirmed with your quote
CareMachine wash cool on a gentle cycle. Furoshiki cloths in cotton cambric can go in a normal machine wash at that temperature.
  • Any MOQ — from 3 metres, or a few sample pieces
  • Competitive per-metre pricing — ask for a quote
  • In-house digital printing unit at S-73, Okhla Industrial Area Phase II, New Delhi, since 1996
  • In-house tailoring: printed fabric only, or the ready stitched product

Frequently asked questions

Is cotton cambric good for furoshiki cloths?

Cotton cambric suits furoshiki cloths: it is one of the usual first choices for this job and it is soft and easy to handle. It is light, so pale colours can show what is underneath.

How many furoshiki cloths can I get from 3 metres of cotton cambric?

On 44-inch fabric (about 108 cm usable): 4 furoshiki cloths from 3 m (1 across × 4 down = 4 pieces of 72 × 72 cm). On 58-inch fabric (about 143 cm usable): 4 furoshiki cloths from 3 m (1 across × 4 down = 4 pieces of 72 × 72 cm). Fabric for 10 furoshiki cloths: about 7.2 m of 58-inch fabric, before any extra for samples. Weight of fabric used per piece: about 41-52 g per furoshiki, before trims and packing. Sizes and yields are typical; we confirm them with your quote.

Can you deliver ready furoshiki cloths in cotton cambric, or only the printed fabric?

Both: our in-house tailoring stitches the furoshiki cloths, or you take the printed cotton cambric only. Cotton cambric is light, so it takes the usual furoshiki finish without special handling: rolled or narrow hems.

How do I wash a printed cotton cambric furoshiki?

Machine wash cool on a gentle cycle. Furoshiki cloths in cotton cambric can go in a normal machine wash at that temperature. Reactive colour is fixed by steaming and washing-off, so it is wash-fast; the fibre decides the care.

What can I use instead of cotton cambric for furoshiki cloths?

Cotton poplin, for an opaque piece. Cotton poplin is smooth, firm and light; holds a neat, crisp shape.

What is the minimum order quantity for cotton cambric furoshiki cloths?

Any MOQ — from 3 metres, or a few sample pieces. 3 m of cotton cambric already makes about 4 furoshiki cloths, so a sample run can be a small batch.

How is the price of cotton cambric furoshiki cloths worked out?

Competitive per-metre pricing, quoted for your design and quantity. For furoshiki cloths, cotton cambric sits in the lower-middle cost band of the bases we print, and ready furoshiki cloths add stitching and finishing to the printed fabric.

Cotton cambric furoshiki cloths by use

Each page sets the size, quantity, finishing and care for one use.

Get a quote for cotton cambric furoshiki cloths

Send your design, the size and the quantity. We reply with the price and a sample plan.

Up to 3 files, 20 MB each — JPG, PNG, TIFF, PDF, PSD, AI, EPS, CDR or ZIP. Bigger files: send them on WhatsApp.
Or WhatsApp us

HM International

Okhla Industrial, S-73, Sanjay Colony II, Pocket Y, Sanjay Colony, Okhla Phase II, Area, New Delhi, Delhi 110020

+91 98181 98500

Monday10 am – 7 pm
Tuesday10 am – 7 pm
Wednesday10 am – 7 pm
Thursday10 am – 7 pm
Friday10 am – 7 pm
Saturday10 am – 7 pm
SundayClosed
WhatsApp us