Home › Products › Suit piece printing › Polyester satin
Polyester satin suit piece printing
Custom suit pieces on polyester satin, printed by sublimation in Okhla, Delhi: about 1 suit piece from 3 m of typical 58-inch polyester satin. Fabric or ready-made.
Is polyester satin right for suit pieces?
Polyester satin suits suit pieces: it falls in fluid folds and it keeps the cost per piece low. Printed with sublimation: the brightest, sharpest colour of all; the dye is inside the fibre, so it cannot crack.
Trade-off: Polyester is less breathable than cotton in hot weather. If that matters, choose cotton cambric for more absorbency and breathability.
Design tips: Engineer the yoke, border and dupatta layout so the set matches when stitched. On polyester satin, bright, saturated colours and dark grounds look glossy and rich.
Print your own design: send the artwork and the suit piece size, and we print a sample on polyester satin before the run. Order the printed fabric only, or ready suit pieces stitched in-house.

Suit pieces on polyester satin: size and yield
| Typical finished size | Kurta about 2.5 m, dupatta about 2.25 m, bottom about 2.5 m (on 44-inch); engineered panels |
|---|---|
| On 58-inch fabric (about 143 cm usable) | 1 suit piece from 3 m (about 2.5 m × 108/143 cm ≈ 1.9 m each) |
| Fabric for 10 suit pieces | About 18.9 m of 58-inch fabric, before any extra for samples |
| Weight of fabric used per piece | About 250-334 g per suit piece, before trims and packing |
| How it is counted | Basis: a kurta top takes about 2.5 m of 44-inch fabric; wider fabric needs proportionally less length. |
| Finishing options | Cut panels with placed borders and yokes, matched dupatta, packed as sets |
Polyester satin at a glance
| Hand-feel and drape | Smooth and slippery, with a fluid drape |
|---|---|
| Sheen | High sheen |
| Opacity | Opaque at typical weights |
| Typical weight / width | Typical 90-120 gsm; typical width 58″ |
| How the print looks | Sublimation: The brightest, sharpest colour of all; the dye is inside the fibre, so it cannot crack |
| Care | Cool machine wash; iron on the reverse on low heat |
| Good for | Scarves, scroll invitations, table flags, linings, pooja cloth, cushion covers |
| Not ideal for | Napkins and towels (low absorbency) |
How polyester satin meets what suit pieces need
| Weight: suit pieces work on very light to medium-weight fabric | Polyester satin is light, typical 90-120 gsm, inside that range. |
|---|---|
| Opacity: suit pieces can be sheer | Polyester satin is opaque with room to spare. |
| Drape: suit pieces handle best in a soft or fluid fabric | Polyester satin is fluid, a match. |
Polyester satin comes in a typical 58-inch width, so a suit piece takes about 1.9 m instead of 2.5 m on 44-inch, about 24% less length.
Making suit pieces in polyester satin
Polyester satin is light, so it takes the usual suit piece finish without special handling: cut panels with placed borders and yokes. The high-sheen face of polyester satin shifts when cut and shows needle marks, so suit piece panels are best cut in single layers and stitched without unpicking. Polyester satin shows creases, so finished suit pieces are pressed before they are folded and packed.
What the print process means here
Suit pieces in polyester satin are printed by sublimation, the process for polyester: heat turns the dye to a gas that enters the fibre, so nothing sits on the surface to crack when the suit piece is folded. Polyester satin is opaque, so the reverse of a suit piece stays much paler than the printed face. The high-sheen face deepens dark shades, so dark-ground suit pieces look richest on polyester satin. Digital printing has no white ink, so any white in a suit piece design is the colour of the polyester satin itself.
Polyester satin or peach-finish polyester for suit pieces?
Against peach-finish polyester, polyester satin for suit pieces is high-sheen where peach-finish polyester is matte; and fluid in the hand where peach-finish polyester is soft. Pick polyester satin for a glossier and more fluid suit piece; pick peach-finish polyester for a more matte and firmer one. See peach-finish polyester suit pieces.
Other fabrics for suit pieces
- Peach-finish polyester suit piece printing: more matte and firmer than polyester satin, about 1 from 3 m
- Polyester crepe suit piece printing: sheerer and more matte than polyester satin, about 1 from 3 m
- Silk satin suit piece printing: sheerer than polyester satin, about 1 from 3 m
- Viscose rayon suit piece printing: sheerer and more matte than polyester satin, about 1 from 3 m
Other products in polyester satin
- Polyester satin kaftan printing: about 1 kaftan from the 3 m that makes 1 suit piece
- Polyester satin tie printing: about 12 ties from the 3 m that makes 1 suit piece
- Polyester satin table flag printing: about 80 table flags from the 3 m that makes 1 suit piece
- Polyester satin bunting pennant printing: about 120 bunting pennants from the 3 m that makes 1 suit piece
Specification
| Printing process | Sublimation on polyester (two Mimaki printers) |
|---|---|
| Fabrics | Polyester satin |
| Typical fabric weight | Typical 90-120 gsm (typical width 58″) |
| Sizes | Kurta about 2.5 m, dupatta about 2.25 m, bottom about 2.5 m (on 44-inch); engineered panels |
| Order as | Printed fabric only, or the ready finished product, stitched and packed in-house |
| Finishing options | Cut panels with placed borders and yokes, matched dupatta, packed as sets |
| Minimum order | From 3 metres of fabric, or a few sample pieces, including finished pieces |
| Turnaround | Sample first; sample and bulk dates are confirmed with your quote |
| Care | Cool machine wash; iron on the reverse on low heat. Suit pieces in polyester satin wash cool, dry fast and need little ironing. |
- Any MOQ — from 3 metres, or a few sample pieces
- Competitive per-metre pricing — ask for a quote
- In-house digital printing unit at S-73, Okhla Industrial Area Phase II, New Delhi, since 1996
- In-house tailoring: printed fabric only, or the ready stitched product
Frequently asked questions
Is polyester satin good for suit pieces?
Polyester satin suits suit pieces: it falls in fluid folds and it keeps the cost per piece low. Polyester is less breathable than cotton in hot weather.
How many suit pieces can I get from 3 metres of polyester satin?
On 58-inch fabric (about 143 cm usable): 1 suit piece from 3 m (about 2.5 m × 108/143 cm ≈ 1.9 m each). Fabric for 10 suit pieces: about 18.9 m of 58-inch fabric, before any extra for samples. Weight of fabric used per piece: about 250-334 g per suit piece, before trims and packing. Sizes and yields are typical; we confirm them with your quote.
Can you deliver ready suit pieces in polyester satin, or only the printed fabric?
Both: our in-house tailoring stitches the suit pieces, or you take the printed polyester satin only. Polyester satin is light, so it takes the usual suit piece finish without special handling: cut panels with placed borders and yokes. The high-sheen face of polyester satin shifts when cut and shows needle marks, so suit piece panels are best cut in single layers and stitched without unpicking.
How do I wash a printed polyester satin suit piece?
Cool machine wash; iron on the reverse on low heat. Suit pieces in polyester satin wash cool, dry fast and need little ironing. Sublimated colour is inside the polyester fibre, so it does not crack or peel.
What can I use instead of polyester satin for suit pieces?
Cotton cambric, for more absorbency and breathability. Cotton cambric is light, fine and soft; a little softer than poplin.
How does polyester satin compare with polyester crepe for suit pieces?
Against polyester crepe, polyester satin for suit pieces is opaque where polyester crepe is semi-opaque; and high-sheen where polyester crepe is matte. Pick polyester satin for a more opaque and glossier suit piece; pick polyester crepe for a sheerer and more matte one.
What is the minimum order quantity for polyester satin suit pieces?
Any MOQ — from 3 metres, or a few sample pieces. 3 m of polyester satin already makes about 1 suit piece, so a sample run can be a small batch.
How is the price of polyester satin suit pieces worked out?
Competitive per-metre pricing, quoted for your design and quantity. For suit pieces, polyester satin sits in the lowest cost band of the bases we print, and ready suit pieces add stitching and finishing to the printed fabric.
Questions about suit piece and polyester satin
Get a quote for polyester satin suit pieces
Send your design, the size and the quantity. We reply with the price and a sample plan.
HM International
Okhla Industrial, S-73, Sanjay Colony II, Pocket Y, Sanjay Colony, Okhla Phase II, Area, New Delhi, Delhi 110020
| Monday | 10 am – 7 pm |
| Tuesday | 10 am – 7 pm |
| Wednesday | 10 am – 7 pm |
| Thursday | 10 am – 7 pm |
| Friday | 10 am – 7 pm |
| Saturday | 10 am – 7 pm |
| Sunday | Closed |