Mon–Sat 10 am – 7 pm · Okhla Phase II, New Delhi +91 98181 98500 · info@skyfashion.in

Home › Products › Suit piece printing › Polyester crepe

Polyester crepe suit piece printing

Custom suit pieces on polyester crepe, printed by sublimation in Okhla, Delhi: about 1 suit piece from 3 m of typical 58-inch polyester crepe. Fabric or ready-made.

Is polyester crepe right for suit pieces?

Polyester crepe suits suit pieces: it is one of the usual first choices for this job, it falls in fluid folds and it keeps the cost per piece low. Printed with sublimation: bright colour, slightly softened by the crepe grain.

Trade-off: Polyester is less breathable than cotton in hot weather. If that matters, choose cotton cambric for more absorbency and breathability.

Design tips: Engineer the yoke, border and dupatta layout so the set matches when stitched. On polyester crepe, all-over florals and small repeats suit the grainy surface.

Print your own design: send the artwork and the suit piece size, and we print a sample on polyester crepe before the run. Order the printed fabric only, or ready suit pieces stitched in-house.

WhatsApp your designOr use the form

Swirl design printing on polyester fabric

Suit pieces on polyester crepe: size and yield

Typical finished sizeKurta about 2.5 m, dupatta about 2.25 m, bottom about 2.5 m (on 44-inch); engineered panels
On 58-inch fabric (about 143 cm usable)1 suit piece from 3 m (about 2.5 m × 108/143 cm ≈ 1.9 m each)
Fabric for 10 suit piecesAbout 18.9 m of 58-inch fabric, before any extra for samples
Weight of fabric used per pieceAbout 278-389 g per suit piece, before trims and packing
How it is countedBasis: a kurta top takes about 2.5 m of 44-inch fabric; wider fabric needs proportionally less length.
Finishing optionsCut panels with placed borders and yokes, matched dupatta, packed as sets

Polyester crepe at a glance

Hand-feel and drapeFluid, with a grainy crepe surface that resists creasing
SheenMatte
OpacitySemi-opaque
Typical weight / widthTypical 100-140 gsm; typical width 58″
How the print looksSublimation: Bright colour, slightly softened by the crepe grain
CareCool wash; cool iron
Good forSarees, kurtis, hijabs, kaftans, furoshiki
Not ideal forStiff items

How polyester crepe meets what suit pieces need

Weight: suit pieces work on very light to medium-weight fabricPolyester crepe is light, typical 100-140 gsm, inside that range.
Opacity: suit pieces can be sheerPolyester crepe is semi-opaque with room to spare.
Drape: suit pieces handle best in a soft or fluid fabricPolyester crepe is fluid, a match.

Polyester crepe comes in a typical 58-inch width, so a suit piece takes about 1.9 m instead of 2.5 m on 44-inch, about 24% less length.

Making suit pieces in polyester crepe

Polyester crepe is light, so it takes the usual suit piece finish without special handling: cut panels with placed borders and yokes.

What the print process means here

Suit pieces in polyester crepe are printed by sublimation, the process for polyester: heat turns the dye to a gas that enters the fibre, so nothing sits on the surface to crack when the suit piece is folded. Polyester crepe is semi-opaque, so the design shows faintly on the back of a suit piece. Digital printing has no white ink, so any white in a suit piece design is the colour of the polyester crepe itself.

Polyester crepe or rayon crepe for suit pieces?

Against rayon crepe, polyester crepe for suit pieces is polyester where rayon crepe is regenerated cellulose; easy-care polyester (cool machine wash, dries fast) where rayon crepe is a gentle-wash fibre (weaker when wet); and lower in cost. Pick polyester crepe for an easier-care and lower-cost suit piece; pick rayon crepe for a natural-fibre one. See rayon crepe suit pieces.

Other fabrics for suit pieces

Other products in polyester crepe

Specification

Printing processSublimation on polyester (two Mimaki printers)
FabricsPolyester crepe
Typical fabric weightTypical 100-140 gsm (typical width 58″)
SizesKurta about 2.5 m, dupatta about 2.25 m, bottom about 2.5 m (on 44-inch); engineered panels
Order asPrinted fabric only, or the ready finished product, stitched and packed in-house
Finishing optionsCut panels with placed borders and yokes, matched dupatta, packed as sets
Minimum orderFrom 3 metres of fabric, or a few sample pieces, including finished pieces
TurnaroundSample first; sample and bulk dates are confirmed with your quote
CareCool wash; cool iron. Suit pieces in polyester crepe wash cool, dry fast and need little ironing.
  • Any MOQ — from 3 metres, or a few sample pieces
  • Competitive per-metre pricing — ask for a quote
  • In-house digital printing unit at S-73, Okhla Industrial Area Phase II, New Delhi, since 1996
  • In-house tailoring: printed fabric only, or the ready stitched product

Frequently asked questions

Is polyester crepe good for suit pieces?

Polyester crepe suits suit pieces: it is one of the usual first choices for this job, it falls in fluid folds and it keeps the cost per piece low. Polyester is less breathable than cotton in hot weather.

How many suit pieces can I get from 3 metres of polyester crepe?

On 58-inch fabric (about 143 cm usable): 1 suit piece from 3 m (about 2.5 m × 108/143 cm ≈ 1.9 m each). Fabric for 10 suit pieces: about 18.9 m of 58-inch fabric, before any extra for samples. Weight of fabric used per piece: about 278-389 g per suit piece, before trims and packing. Sizes and yields are typical; we confirm them with your quote.

Can you deliver ready suit pieces in polyester crepe, or only the printed fabric?

Both: our in-house tailoring stitches the suit pieces, or you take the printed polyester crepe only. Polyester crepe is light, so it takes the usual suit piece finish without special handling: cut panels with placed borders and yokes.

How do I wash a printed polyester crepe suit piece?

Cool wash; cool iron. Suit pieces in polyester crepe wash cool, dry fast and need little ironing. Sublimated colour is inside the polyester fibre, so it does not crack or peel.

What can I use instead of polyester crepe for suit pieces?

Cotton cambric, for more absorbency and breathability. Cotton cambric is light, fine and soft; a little softer than poplin.

How does polyester crepe compare with peach-finish polyester for suit pieces?

Against peach-finish polyester, polyester crepe for suit pieces is semi-opaque where peach-finish polyester is opaque; and fluid in the hand where peach-finish polyester is soft. Pick polyester crepe for a sheerer and more fluid suit piece; pick peach-finish polyester for a more opaque and firmer one.

What is the minimum order quantity for polyester crepe suit pieces?

Any MOQ — from 3 metres, or a few sample pieces. 3 m of polyester crepe already makes about 1 suit piece, so a sample run can be a small batch.

How is the price of polyester crepe suit pieces worked out?

Competitive per-metre pricing, quoted for your design and quantity. For suit pieces, polyester crepe sits in the lowest cost band of the bases we print, and ready suit pieces add stitching and finishing to the printed fabric.

Get a quote for polyester crepe suit pieces

Send your design, the size and the quantity. We reply with the price and a sample plan.

Up to 3 files, 20 MB each — JPG, PNG, TIFF, PDF, PSD, AI, EPS, CDR or ZIP. Bigger files: send them on WhatsApp.
Or WhatsApp us

HM International

Okhla Industrial, S-73, Sanjay Colony II, Pocket Y, Sanjay Colony, Okhla Phase II, Area, New Delhi, Delhi 110020

+91 98181 98500

Monday10 am – 7 pm
Tuesday10 am – 7 pm
Wednesday10 am – 7 pm
Thursday10 am – 7 pm
Friday10 am – 7 pm
Saturday10 am – 7 pm
SundayClosed
WhatsApp us