Mon–Sat 10 am – 7 pm · Okhla Phase II, New Delhi +91 98181 98500 · info@skyfashion.in

Home › Products › Suit piece printing › Viscose rayon

Viscose rayon suit piece printing

Custom suit pieces on viscose rayon, printed by reactive dyes in Okhla, Delhi: about 1 suit piece from 3 m of typical 44-inch viscose rayon. Fabric or ready-made.

Is viscose rayon right for suit pieces?

Viscose rayon suits suit pieces: it is one of the usual first choices for this job and it falls in fluid folds. Printed with reactive dyes: bright, saturated colour, often brighter than the same print on cotton.

Trade-off: Viscose-type fibres are weaker when wet: wash gently in cold water and expect a little shrinkage on the first wash. If that matters, choose cotton cambric for easier washing.

Design tips: Engineer the yoke, border and dupatta layout so the set matches when stitched. On viscose rayon, bright, saturated florals and tropicals make the most of how viscose takes colour.

Print your own design: send the artwork and the suit piece size, and we print a sample on viscose rayon before the run. Order the printed fabric only, or ready suit pieces stitched in-house.

WhatsApp your designOr use the form

Digitally printed floral scarf

Suit pieces on viscose rayon: size and yield

Typical finished sizeKurta about 2.5 m, dupatta about 2.25 m, bottom about 2.5 m (on 44-inch); engineered panels
On 44-inch fabric (about 108 cm usable)1 suit piece from 3 m (about 2.5 m on 44-inch each)
Fabric for 10 suit piecesAbout 25.0 m of 44-inch fabric, before any extra for samples
Weight of fabric used per pieceAbout 279-363 g per suit piece, before trims and packing
How it is countedBasis: a kurta top takes about 2.5 m of 44-inch fabric; wider fabric needs proportionally less length.
Finishing optionsCut panels with placed borders and yokes, matched dupatta, packed as sets

Viscose rayon at a glance

Hand-feel and drapeSoft, smooth and fluid; drapes and swings
SheenSoft lustre
OpacitySemi-opaque
Typical weight / widthTypical 100-130 gsm; typical width 44″
How the print looksReactive: Bright, saturated colour, often brighter than the same print on cotton
CareHand wash or gentle cold wash; weak when wet, so do not wring
Good forScarves, kurtis, kaftans, hijabs, nightwear
Not ideal forItems washed hard and often

How viscose rayon meets what suit pieces need

Weight: suit pieces work on very light to medium-weight fabricViscose rayon is light, typical 100-130 gsm, inside that range.
Opacity: suit pieces can be sheerViscose rayon is semi-opaque with room to spare.
Drape: suit pieces handle best in a soft or fluid fabricViscose rayon is fluid, a match.

Viscose rayon comes in a typical 44-inch width, the width the 2.5 m per suit piece is based on; the same suit piece cut from a 58-inch fabric would need about 1.9 m.

Making suit pieces in viscose rayon

Viscose rayon is light, so it takes the usual suit piece finish without special handling: cut panels with placed borders and yokes. Viscose rayon can shrink a little in its first wash, so stitched suit pieces in it should be sized with that in mind.

What the print process means here

Suit pieces in viscose rayon are printed with reactive dyes, because viscose rayon is a regenerated cellulose fibre; the dye bonds to the fibre, and the fabric is then steamed and washed off, so the hand of the suit piece stays soft with no coating on top. Viscose rayon is semi-opaque, so the design shows faintly on the back of a suit piece. Digital printing has no white ink, so any white in a suit piece design is the colour of the viscose rayon itself.

Viscose rayon or modal for suit pieces?

Against modal, viscose rayon for suit pieces is lower in cost. Pick viscose rayon for a lower-cost suit piece. See modal suit pieces.

Other fabrics for suit pieces

Other products in viscose rayon

Specification

Printing processReactive digital printing (steam fixed, washed off)
FabricsViscose / rayon
Typical fabric weightTypical 100-130 gsm (typical width 44″)
SizesKurta about 2.5 m, dupatta about 2.25 m, bottom about 2.5 m (on 44-inch); engineered panels
Order asPrinted fabric only, or the ready finished product, stitched and packed in-house
Finishing optionsCut panels with placed borders and yokes, matched dupatta, packed as sets
Minimum orderFrom 3 metres of fabric, or a few sample pieces, including finished pieces
TurnaroundSample first; sample and bulk dates are confirmed with your quote
CareHand wash or gentle cold wash; weak when wet, so do not wring. Suit pieces in viscose rayon last longest with a cold, gentle wash and drying in shade; do not wring them.
  • Any MOQ — from 3 metres, or a few sample pieces
  • Competitive per-metre pricing — ask for a quote
  • In-house digital printing unit at S-73, Okhla Industrial Area Phase II, New Delhi, since 1996
  • In-house tailoring: printed fabric only, or the ready stitched product

Frequently asked questions

Is viscose rayon good for suit pieces?

Viscose rayon suits suit pieces: it is one of the usual first choices for this job and it falls in fluid folds. Viscose-type fibres are weaker when wet: wash gently in cold water and expect a little shrinkage on the first wash.

How many suit pieces can I get from 3 metres of viscose rayon?

On 44-inch fabric (about 108 cm usable): 1 suit piece from 3 m (about 2.5 m on 44-inch each). Fabric for 10 suit pieces: about 25.0 m of 44-inch fabric, before any extra for samples. Weight of fabric used per piece: about 279-363 g per suit piece, before trims and packing. Sizes and yields are typical; we confirm them with your quote.

Can you deliver ready suit pieces in viscose rayon, or only the printed fabric?

Both: our in-house tailoring stitches the suit pieces, or you take the printed viscose rayon only. Viscose rayon is light, so it takes the usual suit piece finish without special handling: cut panels with placed borders and yokes. Viscose rayon can shrink a little in its first wash, so stitched suit pieces in it should be sized with that in mind.

How do I wash a printed viscose rayon suit piece?

Hand wash or gentle cold wash; weak when wet, so do not wring. Suit pieces in viscose rayon last longest with a cold, gentle wash and drying in shade; do not wring them. Reactive colour is fixed by steaming and washing-off, so it is wash-fast; the fibre decides the care.

What can I use instead of viscose rayon for suit pieces?

Cotton cambric, for easier washing. Cotton cambric is light, fine and soft; a little softer than poplin.

How does viscose rayon compare with rayon crepe for suit pieces?

Against rayon crepe, viscose rayon for suit pieces is softly lustrous where rayon crepe is matte. Pick viscose rayon for a glossier suit piece; pick rayon crepe for a more matte one.

What is the minimum order quantity for viscose rayon suit pieces?

Any MOQ — from 3 metres, or a few sample pieces. 3 m of viscose rayon already makes about 1 suit piece, so a sample run can be a small batch.

How is the price of viscose rayon suit pieces worked out?

Competitive per-metre pricing, quoted for your design and quantity. For suit pieces, viscose rayon sits in the lower-middle cost band of the bases we print, and ready suit pieces add stitching and finishing to the printed fabric.

Viscose rayon suit pieces by use

Each page sets the size, quantity, finishing and care for one use.

Get a quote for viscose rayon suit pieces

Send your design, the size and the quantity. We reply with the price and a sample plan.

Up to 3 files, 20 MB each — JPG, PNG, TIFF, PDF, PSD, AI, EPS, CDR or ZIP. Bigger files: send them on WhatsApp.
Or WhatsApp us

HM International

Okhla Industrial, S-73, Sanjay Colony II, Pocket Y, Sanjay Colony, Okhla Phase II, Area, New Delhi, Delhi 110020

+91 98181 98500

Monday10 am – 7 pm
Tuesday10 am – 7 pm
Wednesday10 am – 7 pm
Thursday10 am – 7 pm
Friday10 am – 7 pm
Saturday10 am – 7 pm
SundayClosed
WhatsApp us