Mon–Sat 10 am – 7 pm · Okhla Phase II, New Delhi +91 98181 98500 · info@skyfashion.in

Home › Products › Printed lining fabric › Polyester satin › Polyester satin jacket linings for ready-to-wear jackets

Polyester satin jacket linings for ready-to-wear jackets

Jacket linings for ready-to-wear jackets on polyester satin, printed by sublimation and stitched in Okhla, Delhi: about 2 jacket linings from 3 m of 58-inch.

What jacket linings for ready-to-wear jackets need

Ready-to-wear linings are cut in numbers, so cost and easy care matter.

Why polyester satin for ready-to-wear jackets: it is easy-care polyester — it washes with the jacket; it is one of the lowest-cost bases — linings are cut in numbers.

Trade-off: It meets every need on the list for ready-to-wear jackets. The high sheen can glare under strong light and shows every crease.

Buyer tip for ready-to-wear jackets: Order lining by the metre for the whole run, so every size matches.

Print your own design: send the artwork, the size and the quantity, and we print a sample on polyester satin before the run. Order the printed fabric only, or ready jacket linings stitched in-house for ready-to-wear jackets.

WhatsApp your designOr use the form

Printed satin scarf with a glossy finish

Jacket linings for ready-to-wear jackets on polyester satin: size and quantity

Recommended sizeAbout 1.5 m per jacket lining on 44-inch, across a size run
From 3 m of 58-inch fabric (about 143 cm usable)2 jacket linings from 3 m (about 1.13 m each)
Fabric for 100 jacket liningsAbout 113.3 m of 58-inch polyester satin, before samples and spares
Fabric weight per pieceAbout 150-200 g per jacket lining at this size (typical 90-120 gsm), before trims and packing
How orders runSize runs per style, reordered with the collection
Finishing for ready-to-wear jacketsFabric by the metre
Care in useMachine wash or dry clean with the jacket. Fabric care: cool machine wash; iron on the reverse on low heat

What we check for ready-to-wear jackets

  • Easy care: it washes with the jacket ✓
  • Budget: linings are cut in numbers ✓

The other fabric we shortlist for jacket linings for ready-to-wear jackets:

  • Polyester crepe: it is easy-care polyester; it is one of the lowest-cost bases.

Specification

Printing processSublimation on polyester (two Mimaki printers)
FabricsPolyester satin
Typical fabric weightTypical 90-120 gsm (typical width 58″)
SizesAbout 1.5 m per jacket lining on 44-inch, across a size run
Order asPrinted fabric only, or the ready finished product, stitched and packed in-house
Finishing optionsFabric by the metre
Minimum orderFrom 3 metres of fabric, or a few sample pieces, including finished pieces
TurnaroundSample first; sample and bulk dates are confirmed with your quote
CareCool machine wash; iron on the reverse on low heat
  • Any MOQ — from 3 metres, or a few sample pieces
  • Competitive per-metre pricing — ask for a quote
  • In-house digital printing unit at S-73, Okhla Industrial Area Phase II, New Delhi, since 1996
  • In-house tailoring: printed fabric only, or the ready stitched product

Frequently asked questions

Is polyester satin a good choice for jacket linings for ready-to-wear jackets?

Why polyester satin for ready-to-wear jackets: it is easy-care polyester — it washes with the jacket; it is one of the lowest-cost bases — linings are cut in numbers. Trade-off: it meets every need on the list for ready-to-wear jackets. The high sheen can glare under strong light and shows every crease.

How many jacket linings for ready-to-wear jackets come from 3 metres of polyester satin?

We recommend about 1.5 m per jacket lining on 44-inch, across a size run for ready-to-wear jackets. From 3 m of 58-inch fabric (about 143 cm usable): 2 jacket linings from 3 m (about 1.13 m each). Fabric for 100 jacket linings: about 113.3 m of 58-inch polyester satin, before samples and spares. Counts are typical; we confirm them with your quote.

Can you deliver ready jacket linings for ready-to-wear jackets, or only printed polyester satin?

Both. Our in-house tailoring finishes them for ready-to-wear jackets: fabric by the metre. Or take the printed polyester satin only.

Which lining fabric suits ready-to-wear jackets?

Polyester satin or crepe: easy care and a low cost per jacket.

Is there a minimum order quantity (MOQ)?

Any MOQ is fine: we print from as little as 3 metres, and sample pieces too, up to bulk.

What is your price per metre?

Competitive per-metre pricing. Ask for a quote with your fabric, design and quantity and we reply with the price.

Get a quote for polyester satin jacket linings for ready-to-wear jackets

Send your design, the size and the quantity. We reply with the price and a sample plan.

Up to 3 files, 20 MB each — JPG, PNG, TIFF, PDF, PSD, AI, EPS, CDR or ZIP. Bigger files: send them on WhatsApp.
Or WhatsApp us

HM International

Okhla Industrial, S-73, Sanjay Colony II, Pocket Y, Sanjay Colony, Okhla Phase II, Area, New Delhi, Delhi 110020

+91 98181 98500

Monday10 am – 7 pm
Tuesday10 am – 7 pm
Wednesday10 am – 7 pm
Thursday10 am – 7 pm
Friday10 am – 7 pm
Saturday10 am – 7 pm
SundayClosed
WhatsApp us