Home › Products › Flag printing › Polyester satin
Polyester satin flag printing
Custom flags on polyester satin, printed by sublimation in Okhla, Delhi: about 6 flags from 3 m of typical 58-inch polyester satin. Fabric or ready-made.
Is polyester satin right for flags?
Polyester satin suits flags: it is one of the usual first choices for this job, sublimated colour sits inside the fibre and stands up to sun and wind and it keeps the cost per piece low. Printed with sublimation: the brightest, sharpest colour of all; the dye is inside the fibre, so it cannot crack.
Trade-off: The high sheen can glare under strong light and shows every crease. If that matters, choose polyester spun for a matte look.
Design tips: Keep logos away from the pole sleeve and allow 2 cm for hems on the fly edge. On polyester satin, bright, saturated colours and dark grounds look glossy and rich.
Print your own design: send the artwork and the flag size, and we print a sample on polyester satin before the run. Order the printed fabric only, or ready flags stitched in-house.

Flags on polyester satin: size and yield
| Typical finished size | 60 x 90 cm (cut 64 x 98 cm with hem and pole sleeve); 90 x 150 cm or your size |
|---|---|
| On 58-inch fabric (about 143 cm usable) | 6 flags from 3 m (2 across × 3 down = 6 pieces of 64 × 98 cm) |
| Fabric for 10 flags | About 4.9 m of 58-inch fabric, before any extra for samples |
| Weight of fabric used per piece | About 56-75 g per flag, before trims and packing |
| How it is counted | Pieces are counted on the usable width (fabric width less about 4 cm of selvedge) across a 3 m length, trying both directions. |
| Finishing options | Double-stitched hems, pole sleeve, grommets or ties, two-layer double-sided flags |
Polyester satin at a glance
| Hand-feel and drape | Smooth and slippery, with a fluid drape |
|---|---|
| Sheen | High sheen |
| Opacity | Opaque at typical weights |
| Typical weight / width | Typical 90-120 gsm; typical width 58″ |
| How the print looks | Sublimation: The brightest, sharpest colour of all; the dye is inside the fibre, so it cannot crack |
| Care | Cool machine wash; iron on the reverse on low heat |
| Good for | Scarves, scroll invitations, table flags, linings, pooja cloth, cushion covers |
| Not ideal for | Napkins and towels (low absorbency) |
How polyester satin meets what flags need
| Weight: flags work on very light to medium-weight fabric | Polyester satin is light, typical 90-120 gsm, inside that range. |
|---|---|
| Opacity: flags can be sheer | Polyester satin is opaque with room to spare. |
| Outdoors: flags face sun and wind | Polyester satin is sublimated polyester, so the colour is inside the fibre. |
On 58-inch polyester satin, 2 cut pieces of 64 cm sit across the 143 cm usable width, leaving about 15 cm (10% of the width) as offcut on every row.
Making flags in polyester satin
Polyester satin is light, so it takes the usual flag finish without special handling: double-stitched hems. The high-sheen face of polyester satin shifts when cut and shows needle marks, so flag panels are best cut in single layers and stitched without unpicking. Polyester satin shows creases, so finished flags are pressed before they are folded and packed.
What the print process means here
Flags in polyester satin are printed by sublimation, the process for polyester: heat turns the dye to a gas that enters the fibre, so the colour stands up to sun and wind on flags. Polyester satin is opaque, so the reverse of a flag stays much paler than the printed face; order a two-layer flag if both sides must show the design. The high-sheen face deepens dark shades, so dark-ground flags look richest on polyester satin. Digital printing has no white ink, so any white in a flag design is the colour of the polyester satin itself.
Polyester satin or peach-finish polyester for flags?
Against peach-finish polyester, polyester satin for flags is high-sheen where peach-finish polyester is matte; and fluid in the hand where peach-finish polyester is soft. Pick polyester satin for a glossier and more fluid flag; pick peach-finish polyester for a more matte and firmer one. See peach-finish polyester flags.
Other fabrics for flags
- Peach-finish polyester flag printing: more matte and firmer than polyester satin, about 6 from 3 m
- Polyester spun flag printing: heavier and more matte than polyester satin, about 6 from 3 m
- Polyester roto flag printing: heavier and more matte than polyester satin, about 6 from 3 m
- Knitted polyester flag printing: sheerer and more matte than polyester satin, about 6 from 3 m
Other products in polyester satin
- Polyester satin saree printing
- Polyester satin pocket square printing: about 32 pocket squares from the 3 m that makes 6 flags
- Polyester satin scroll invitation printing: about 30 scroll invitations from the 3 m that makes 6 flags
- Polyester satin suit piece printing: about 1 suit piece from the 3 m that makes 6 flags
Specification
| Printing process | Sublimation on polyester (two Mimaki printers) |
|---|---|
| Fabrics | Polyester satin |
| Typical fabric weight | Typical 90-120 gsm (typical width 58″) |
| Sizes | 60 x 90 cm (cut 64 x 98 cm with hem and pole sleeve); 90 x 150 cm or your size |
| Order as | Printed fabric only, or the ready finished product, stitched and packed in-house |
| Finishing options | Double-stitched hems, pole sleeve, grommets or ties, two-layer double-sided flags |
| Minimum order | From 3 metres of fabric, or a few sample pieces, including finished pieces |
| Turnaround | Sample first; sample and bulk dates are confirmed with your quote |
| Care | Cool machine wash; iron on the reverse on low heat. Flags spend time outdoors; take polyester satin in from heavy rain and wash off dust in cold water. |
- Any MOQ — from 3 metres, or a few sample pieces
- Competitive per-metre pricing — ask for a quote
- In-house digital printing unit at S-73, Okhla Industrial Area Phase II, New Delhi, since 1996
- In-house tailoring: printed fabric only, or the ready stitched product
Frequently asked questions
Is polyester satin good for flags?
Polyester satin suits flags: it is one of the usual first choices for this job, sublimated colour sits inside the fibre and stands up to sun and wind and it keeps the cost per piece low. The high sheen can glare under strong light and shows every crease.
How many flags can I get from 3 metres of polyester satin?
On 58-inch fabric (about 143 cm usable): 6 flags from 3 m (2 across × 3 down = 6 pieces of 64 × 98 cm). Fabric for 10 flags: about 4.9 m of 58-inch fabric, before any extra for samples. Weight of fabric used per piece: about 56-75 g per flag, before trims and packing. Sizes and yields are typical; we confirm them with your quote.
Can you deliver ready flags in polyester satin, or only the printed fabric?
Both: our in-house tailoring stitches the flags, or you take the printed polyester satin only. Polyester satin is light, so it takes the usual flag finish without special handling: double-stitched hems. The high-sheen face of polyester satin shifts when cut and shows needle marks, so flag panels are best cut in single layers and stitched without unpicking.
How do I wash a printed polyester satin flag?
Cool machine wash; iron on the reverse on low heat. Flags spend time outdoors; take polyester satin in from heavy rain and wash off dust in cold water. Sublimated colour is inside the polyester fibre, so it does not crack or peel.
What can I use instead of polyester satin for flags?
Polyester spun, for a matte look. Polyester spun is medium weight, soft and cotton-like.
What is the minimum order quantity for polyester satin flags?
Any MOQ — from 3 metres, or a few sample pieces. 3 m of polyester satin already makes about 6 flags, so a sample run can be a small batch.
How is the price of polyester satin flags worked out?
Competitive per-metre pricing, quoted for your design and quantity. For flags, polyester satin sits in the lowest cost band of the bases we print, and ready flags add stitching and finishing to the printed fabric.
Polyester satin flags by use
Each page sets the size, quantity, finishing and care for one use.
Questions about flag and polyester satin
Get a quote for polyester satin flags
Send your design, the size and the quantity. We reply with the price and a sample plan.
HM International
Okhla Industrial, S-73, Sanjay Colony II, Pocket Y, Sanjay Colony, Okhla Phase II, Area, New Delhi, Delhi 110020
| Monday | 10 am – 7 pm |
| Tuesday | 10 am – 7 pm |
| Wednesday | 10 am – 7 pm |
| Thursday | 10 am – 7 pm |
| Friday | 10 am – 7 pm |
| Saturday | 10 am – 7 pm |
| Sunday | Closed |