Mon–Sat 10 am – 7 pm · Okhla Phase II, New Delhi +91 98181 98500 · info@skyfashion.in

Home › Products › Saree printing › Polyester crepe

Polyester crepe saree printing

Custom sarees on polyester crepe, printed by sublimation in Okhla, Delhi: one saree needs about 6.3 m. Fabric or ready-made.

Is polyester crepe right for sarees?

Polyester crepe suits sarees: it is one of the usual first choices for this job, it falls in fluid folds and it keeps the cost per piece low. Printed with sublimation: bright colour, slightly softened by the crepe grain.

Trade-off: The crepe grain softens very fine lines slightly. If that matters, choose silk habutai for sharper fine detail.

Design tips: Mark the pallu, border and blouse piece in the layout so each lands in its place on the length. On polyester crepe, all-over florals and small repeats suit the grainy surface.

Print your own design: send the artwork and the saree size, and we print a sample on polyester crepe before the run. Order the printed fabric only, or ready sarees stitched in-house.

WhatsApp your designOr use the form

Swirl design printing on polyester fabric

Sarees on polyester crepe: size and yield

Typical finished sizeAbout 5.5 m plus a 0.8 m blouse piece, on 44-48 inch width
On 58-inch fabric (about 143 cm usable)3 m is a sample or strike-off length: one saree needs about 6.3 m
Fabric for 10 sareesAbout 63.0 m of 58-inch fabric, before any extra for samples
Weight of fabric used per pieceAbout 928-1299 g per saree, before trims and packing
How it is countedBasis: a saree is about 5.5 m plus a 0.8 m blouse piece, and the fabric width becomes the saree’s height, so the length decides the count.
Finishing optionsPico edge finishing, fall stitching, tassels on the pallu, folded and packed

Polyester crepe at a glance

Hand-feel and drapeFluid, with a grainy crepe surface that resists creasing
SheenMatte
OpacitySemi-opaque
Typical weight / widthTypical 100-140 gsm; typical width 58″
How the print looksSublimation: Bright colour, slightly softened by the crepe grain
CareCool wash; cool iron
Good forSarees, kurtis, hijabs, kaftans, furoshiki
Not ideal forStiff items

How polyester crepe meets what sarees need

Weight: sarees work on very light to medium-weight fabricPolyester crepe is light, typical 100-140 gsm, inside that range.
Opacity: sarees can be sheerPolyester crepe is semi-opaque with room to spare.
Drape: sarees handle best in a soft or fluid fabricPolyester crepe is fluid, a match.

The 58-inch width of polyester crepe gives about 143 cm across after selvedge, and that becomes the saree’s height.

Making sarees in polyester crepe

Polyester crepe is light, so it takes the usual saree finish without special handling: pico edge finishing.

What the print process means here

Sarees in polyester crepe are printed by sublimation, the process for polyester: heat turns the dye to a gas that enters the fibre, so nothing sits on the surface to crack when the saree is folded. Polyester crepe is semi-opaque, so the design shows faintly on the back of a saree. Digital printing has no white ink, so any white in a saree design is the colour of the polyester crepe itself.

Polyester crepe or rayon crepe for sarees?

Against rayon crepe, polyester crepe for sarees is polyester where rayon crepe is regenerated cellulose; easy-care polyester (cool machine wash, dries fast) where rayon crepe is a gentle-wash fibre (weaker when wet); and lower in cost. Pick polyester crepe for an easier-care and lower-cost saree; pick rayon crepe for a natural-fibre one. See rayon crepe sarees.

Other fabrics for sarees

Specification

Printing processSublimation on polyester (two Mimaki printers)
FabricsPolyester crepe
Typical fabric weightTypical 100-140 gsm (typical width 58″)
SizesAbout 5.5 m plus a 0.8 m blouse piece, on 44-48 inch width
Order asPrinted fabric only, or the ready finished product, stitched and packed in-house
Finishing optionsPico edge finishing, fall stitching, tassels on the pallu, folded and packed
Minimum orderFrom 3 metres of fabric, or a few sample pieces, including finished pieces
TurnaroundSample first; sample and bulk dates are confirmed with your quote
CareCool wash; cool iron. Sarees in polyester crepe wash cool, dry fast and need little ironing.
  • Any MOQ — from 3 metres, or a few sample pieces
  • Competitive per-metre pricing — ask for a quote
  • In-house digital printing unit at S-73, Okhla Industrial Area Phase II, New Delhi, since 1996
  • In-house tailoring: printed fabric only, or the ready stitched product

Frequently asked questions

Is polyester crepe good for sarees?

Polyester crepe suits sarees: it is one of the usual first choices for this job, it falls in fluid folds and it keeps the cost per piece low. The crepe grain softens very fine lines slightly.

How many sarees can I get from 3 metres of polyester crepe?

On 58-inch fabric (about 143 cm usable): 3 m is a sample or strike-off length: one saree needs about 6.3 m. Fabric for 10 sarees: about 63.0 m of 58-inch fabric, before any extra for samples. Weight of fabric used per piece: about 928-1299 g per saree, before trims and packing. Sizes and yields are typical; we confirm them with your quote.

Can you deliver ready sarees in polyester crepe, or only the printed fabric?

Both: our in-house tailoring stitches the sarees, or you take the printed polyester crepe only. Polyester crepe is light, so it takes the usual saree finish without special handling: pico edge finishing.

How do I wash a printed polyester crepe saree?

Cool wash; cool iron. Sarees in polyester crepe wash cool, dry fast and need little ironing. Sublimated colour is inside the polyester fibre, so it does not crack or peel.

What can I use instead of polyester crepe for sarees?

Silk habutai, for sharper fine detail. Silk habutai is very light, smooth and soft.

How does polyester crepe compare with peach-finish polyester for sarees?

Against peach-finish polyester, polyester crepe for sarees is semi-opaque where peach-finish polyester is opaque; and fluid in the hand where peach-finish polyester is soft. Pick polyester crepe for a sheerer and more fluid saree; pick peach-finish polyester for a more opaque and firmer one.

What is the minimum order quantity for polyester crepe sarees?

Any MOQ — from 3 metres, or a few sample pieces. For sarees in polyester crepe, start with a 3 m strike-off or a single sample piece.

How is the price of polyester crepe sarees worked out?

Competitive per-metre pricing, quoted for your design and quantity. For sarees, polyester crepe sits in the lowest cost band of the bases we print, and ready sarees add stitching and finishing to the printed fabric.

Polyester crepe sarees by use

Each page sets the size, quantity, finishing and care for one use.

Get a quote for polyester crepe sarees

Send your design, the size and the quantity. We reply with the price and a sample plan.

Up to 3 files, 20 MB each — JPG, PNG, TIFF, PDF, PSD, AI, EPS, CDR or ZIP. Bigger files: send them on WhatsApp.
Or WhatsApp us

HM International

Okhla Industrial, S-73, Sanjay Colony II, Pocket Y, Sanjay Colony, Okhla Phase II, Area, New Delhi, Delhi 110020

+91 98181 98500

Monday10 am – 7 pm
Tuesday10 am – 7 pm
Wednesday10 am – 7 pm
Thursday10 am – 7 pm
Friday10 am – 7 pm
Saturday10 am – 7 pm
SundayClosed
WhatsApp us