Mon–Sat 10 am – 7 pm · Okhla Phase II, New Delhi +91 98181 98500 · info@skyfashion.in

Home › Products › Saree printing › Rayon crepe

Rayon crepe saree printing

Custom sarees on rayon crepe, printed by reactive dyes in Okhla, Delhi: one saree needs about 6.3 m. Fabric or ready-made.

Is rayon crepe right for sarees?

Rayon crepe suits sarees: it is one of the usual first choices for this job and it falls in fluid folds. Printed with reactive dyes: rich colour, slightly softened by the crepe grain.

Trade-off: Viscose-type fibres are weaker when wet: wash gently in cold water and expect a little shrinkage on the first wash. If that matters, choose cotton voile for easier washing.

Design tips: Mark the pallu, border and blouse piece in the layout so each lands in its place on the length. On rayon crepe, small all-over prints and soft florals suit the crepe grain.

Print your own design: send the artwork and the saree size, and we print a sample on rayon crepe before the run. Order the printed fabric only, or ready sarees stitched in-house.

WhatsApp your designOr use the form

Teal printed long scarf in a light, flowing fabric

Sarees on rayon crepe: size and yield

Typical finished sizeAbout 5.5 m plus a 0.8 m blouse piece, on 44-48 inch width
On 44-inch fabric (about 108 cm usable)3 m is a sample or strike-off length: one saree needs about 6.3 m
Fabric for 10 sareesAbout 63.0 m of 44-inch fabric, before any extra for samples
Weight of fabric used per pieceAbout 774-986 g per saree, before trims and packing
How it is countedBasis: a saree is about 5.5 m plus a 0.8 m blouse piece, and the fabric width becomes the saree’s height, so the length decides the count.
Finishing optionsPico edge finishing, fall stitching, tassels on the pallu, folded and packed

Rayon crepe at a glance

Hand-feel and drapeFluid, with a fine grainy crepe surface that does not cling
SheenMatte
OpacitySemi-opaque
Typical weight / widthTypical 110-140 gsm; typical width 44″
How the print looksReactive: Rich colour, slightly softened by the crepe grain
CareGentle cold wash or dry clean; may shrink if washed hot
Good forKurtis, sarees, dupattas, kaftans
Not ideal forCrisp, structured shapes

How rayon crepe meets what sarees need

Weight: sarees work on very light to medium-weight fabricRayon crepe is light, typical 110-140 gsm, inside that range.
Opacity: sarees can be sheerRayon crepe is semi-opaque with room to spare.
Drape: sarees handle best in a soft or fluid fabricRayon crepe is fluid, a match.

The 44-inch width of rayon crepe gives about 108 cm across after selvedge, and that becomes the saree’s height.

Making sarees in rayon crepe

Rayon crepe is light, so it takes the usual saree finish without special handling: pico edge finishing.

What the print process means here

Sarees in rayon crepe are printed with reactive dyes, because rayon crepe is a regenerated cellulose fibre; the dye bonds to the fibre, and the fabric is then steamed and washed off, so the hand of the saree stays soft with no coating on top. Rayon crepe is semi-opaque, so the design shows faintly on the back of a saree. Digital printing has no white ink, so any white in a saree design is the colour of the rayon crepe itself.

Rayon crepe or viscose rayon for sarees?

Against viscose rayon, rayon crepe for sarees is matte where viscose rayon is softly lustrous. Pick rayon crepe for a more matte saree; pick viscose rayon for a glossier one. See viscose rayon sarees.

Other fabrics for sarees

Specification

Printing processReactive digital printing (steam fixed, washed off)
FabricsRayon crepe
Typical fabric weightTypical 110-140 gsm (typical width 44″)
SizesAbout 5.5 m plus a 0.8 m blouse piece, on 44-48 inch width
Order asPrinted fabric only, or the ready finished product, stitched and packed in-house
Finishing optionsPico edge finishing, fall stitching, tassels on the pallu, folded and packed
Minimum orderFrom 3 metres of fabric, or a few sample pieces, including finished pieces
TurnaroundSample first; sample and bulk dates are confirmed with your quote
CareGentle cold wash or dry clean; may shrink if washed hot. Sarees in rayon crepe last longest with a cold, gentle wash and drying in shade; do not wring them.
  • Any MOQ — from 3 metres, or a few sample pieces
  • Competitive per-metre pricing — ask for a quote
  • In-house digital printing unit at S-73, Okhla Industrial Area Phase II, New Delhi, since 1996
  • In-house tailoring: printed fabric only, or the ready stitched product

Frequently asked questions

Is rayon crepe good for sarees?

Rayon crepe suits sarees: it is one of the usual first choices for this job and it falls in fluid folds. Viscose-type fibres are weaker when wet: wash gently in cold water and expect a little shrinkage on the first wash.

How many sarees can I get from 3 metres of rayon crepe?

On 44-inch fabric (about 108 cm usable): 3 m is a sample or strike-off length: one saree needs about 6.3 m. Fabric for 10 sarees: about 63.0 m of 44-inch fabric, before any extra for samples. Weight of fabric used per piece: about 774-986 g per saree, before trims and packing. Sizes and yields are typical; we confirm them with your quote.

Can you deliver ready sarees in rayon crepe, or only the printed fabric?

Both: our in-house tailoring stitches the sarees, or you take the printed rayon crepe only. Rayon crepe is light, so it takes the usual saree finish without special handling: pico edge finishing.

How do I wash a printed rayon crepe saree?

Gentle cold wash or dry clean; may shrink if washed hot. Sarees in rayon crepe last longest with a cold, gentle wash and drying in shade; do not wring them. Reactive colour is fixed by steaming and washing-off, so it is wash-fast; the fibre decides the care.

What can I use instead of rayon crepe for sarees?

Cotton voile, for easier washing. Cotton voile is very light, airy and soft; drapes easily.

How does rayon crepe compare with cotton cambric for sarees?

Against cotton cambric, rayon crepe for sarees is fluid in the hand where cotton cambric is soft; and a gentle-wash fibre (weaker when wet) where cotton cambric is machine-washable. Pick rayon crepe for a more fluid saree; pick cotton cambric for a firmer and easier-care one.

What is the minimum order quantity for rayon crepe sarees?

Any MOQ — from 3 metres, or a few sample pieces. For sarees in rayon crepe, start with a 3 m strike-off or a single sample piece.

How is the price of rayon crepe sarees worked out?

Competitive per-metre pricing, quoted for your design and quantity. For sarees, rayon crepe sits in the lower-middle cost band of the bases we print, and ready sarees add stitching and finishing to the printed fabric.

Rayon crepe sarees by use

Each page sets the size, quantity, finishing and care for one use.

Get a quote for rayon crepe sarees

Send your design, the size and the quantity. We reply with the price and a sample plan.

Up to 3 files, 20 MB each — JPG, PNG, TIFF, PDF, PSD, AI, EPS, CDR or ZIP. Bigger files: send them on WhatsApp.
Or WhatsApp us

HM International

Okhla Industrial, S-73, Sanjay Colony II, Pocket Y, Sanjay Colony, Okhla Phase II, Area, New Delhi, Delhi 110020

+91 98181 98500

Monday10 am – 7 pm
Tuesday10 am – 7 pm
Wednesday10 am – 7 pm
Thursday10 am – 7 pm
Friday10 am – 7 pm
Saturday10 am – 7 pm
SundayClosed
WhatsApp us