Home › Products › Suit piece printing › Rayon crepe
Rayon crepe suit piece printing
Custom suit pieces on rayon crepe, printed by reactive dyes in Okhla, Delhi: about 1 suit piece from 3 m of typical 44-inch rayon crepe. Fabric or ready-made.
Is rayon crepe right for suit pieces?
Rayon crepe suits suit pieces: it is one of the usual first choices for this job and it falls in fluid folds. Printed with reactive dyes: rich colour, slightly softened by the crepe grain.
Trade-off: Viscose-type fibres are weaker when wet: wash gently in cold water and expect a little shrinkage on the first wash. If that matters, choose cotton cambric for easier washing.
Design tips: Engineer the yoke, border and dupatta layout so the set matches when stitched. On rayon crepe, small all-over prints and soft florals suit the crepe grain.
Print your own design: send the artwork and the suit piece size, and we print a sample on rayon crepe before the run. Order the printed fabric only, or ready suit pieces stitched in-house.

Suit pieces on rayon crepe: size and yield
| Typical finished size | Kurta about 2.5 m, dupatta about 2.25 m, bottom about 2.5 m (on 44-inch); engineered panels |
|---|---|
| On 44-inch fabric (about 108 cm usable) | 1 suit piece from 3 m (about 2.5 m on 44-inch each) |
| Fabric for 10 suit pieces | About 25.0 m of 44-inch fabric, before any extra for samples |
| Weight of fabric used per piece | About 307-391 g per suit piece, before trims and packing |
| How it is counted | Basis: a kurta top takes about 2.5 m of 44-inch fabric; wider fabric needs proportionally less length. |
| Finishing options | Cut panels with placed borders and yokes, matched dupatta, packed as sets |
Rayon crepe at a glance
| Hand-feel and drape | Fluid, with a fine grainy crepe surface that does not cling |
|---|---|
| Sheen | Matte |
| Opacity | Semi-opaque |
| Typical weight / width | Typical 110-140 gsm; typical width 44″ |
| How the print looks | Reactive: Rich colour, slightly softened by the crepe grain |
| Care | Gentle cold wash or dry clean; may shrink if washed hot |
| Good for | Kurtis, sarees, dupattas, kaftans |
| Not ideal for | Crisp, structured shapes |
How rayon crepe meets what suit pieces need
| Weight: suit pieces work on very light to medium-weight fabric | Rayon crepe is light, typical 110-140 gsm, inside that range. |
|---|---|
| Opacity: suit pieces can be sheer | Rayon crepe is semi-opaque with room to spare. |
| Drape: suit pieces handle best in a soft or fluid fabric | Rayon crepe is fluid, a match. |
Rayon crepe comes in a typical 44-inch width, the width the 2.5 m per suit piece is based on; the same suit piece cut from a 58-inch fabric would need about 1.9 m.
Making suit pieces in rayon crepe
Rayon crepe is light, so it takes the usual suit piece finish without special handling: cut panels with placed borders and yokes. Rayon crepe can shrink a little in its first wash, so stitched suit pieces in it should be sized with that in mind.
What the print process means here
Suit pieces in rayon crepe are printed with reactive dyes, because rayon crepe is a regenerated cellulose fibre; the dye bonds to the fibre, and the fabric is then steamed and washed off, so the hand of the suit piece stays soft with no coating on top. Rayon crepe is semi-opaque, so the design shows faintly on the back of a suit piece. Digital printing has no white ink, so any white in a suit piece design is the colour of the rayon crepe itself.
Rayon crepe or viscose rayon for suit pieces?
Against viscose rayon, rayon crepe for suit pieces is matte where viscose rayon is softly lustrous. Pick rayon crepe for a more matte suit piece; pick viscose rayon for a glossier one. See viscose rayon suit pieces.
Other fabrics for suit pieces
- Viscose rayon suit piece printing: glossier than rayon crepe, about 1 from 3 m
- Cotton cambric suit piece printing: firmer and easier-care than rayon crepe, about 1 from 3 m
- Modal suit piece printing: glossier than rayon crepe, about 1 from 3 m
- Polyester crepe suit piece printing: easier-care and lower-cost than rayon crepe, about 1 from 3 m
Other products in rayon crepe
- Rayon crepe dupatta printing: about 1 dupatta from the 3 m that makes 1 suit piece
- Rayon crepe kurti printing: about 1 kurti from the 3 m that makes 1 suit piece
- Rayon crepe kaftan printing: about 1 kaftan from the 3 m that makes 1 suit piece
- Rayon crepe curtain printing
Specification
| Printing process | Reactive digital printing (steam fixed, washed off) |
|---|---|
| Fabrics | Rayon crepe |
| Typical fabric weight | Typical 110-140 gsm (typical width 44″) |
| Sizes | Kurta about 2.5 m, dupatta about 2.25 m, bottom about 2.5 m (on 44-inch); engineered panels |
| Order as | Printed fabric only, or the ready finished product, stitched and packed in-house |
| Finishing options | Cut panels with placed borders and yokes, matched dupatta, packed as sets |
| Minimum order | From 3 metres of fabric, or a few sample pieces, including finished pieces |
| Turnaround | Sample first; sample and bulk dates are confirmed with your quote |
| Care | Gentle cold wash or dry clean; may shrink if washed hot. Suit pieces in rayon crepe last longest with a cold, gentle wash and drying in shade; do not wring them. |
- Any MOQ — from 3 metres, or a few sample pieces
- Competitive per-metre pricing — ask for a quote
- In-house digital printing unit at S-73, Okhla Industrial Area Phase II, New Delhi, since 1996
- In-house tailoring: printed fabric only, or the ready stitched product
Frequently asked questions
Is rayon crepe good for suit pieces?
Rayon crepe suits suit pieces: it is one of the usual first choices for this job and it falls in fluid folds. Viscose-type fibres are weaker when wet: wash gently in cold water and expect a little shrinkage on the first wash.
How many suit pieces can I get from 3 metres of rayon crepe?
On 44-inch fabric (about 108 cm usable): 1 suit piece from 3 m (about 2.5 m on 44-inch each). Fabric for 10 suit pieces: about 25.0 m of 44-inch fabric, before any extra for samples. Weight of fabric used per piece: about 307-391 g per suit piece, before trims and packing. Sizes and yields are typical; we confirm them with your quote.
Can you deliver ready suit pieces in rayon crepe, or only the printed fabric?
Both: our in-house tailoring stitches the suit pieces, or you take the printed rayon crepe only. Rayon crepe is light, so it takes the usual suit piece finish without special handling: cut panels with placed borders and yokes. Rayon crepe can shrink a little in its first wash, so stitched suit pieces in it should be sized with that in mind.
How do I wash a printed rayon crepe suit piece?
Gentle cold wash or dry clean; may shrink if washed hot. Suit pieces in rayon crepe last longest with a cold, gentle wash and drying in shade; do not wring them. Reactive colour is fixed by steaming and washing-off, so it is wash-fast; the fibre decides the care.
What can I use instead of rayon crepe for suit pieces?
Cotton cambric, for easier washing. Cotton cambric is light, fine and soft; a little softer than poplin.
What is the minimum order quantity for rayon crepe suit pieces?
Any MOQ — from 3 metres, or a few sample pieces. 3 m of rayon crepe already makes about 1 suit piece, so a sample run can be a small batch.
How is the price of rayon crepe suit pieces worked out?
Competitive per-metre pricing, quoted for your design and quantity. For suit pieces, rayon crepe sits in the lower-middle cost band of the bases we print, and ready suit pieces add stitching and finishing to the printed fabric.
Rayon crepe suit pieces by use
Each page sets the size, quantity, finishing and care for one use.
Questions about suit piece and rayon crepe
Get a quote for rayon crepe suit pieces
Send your design, the size and the quantity. We reply with the price and a sample plan.
HM International
Okhla Industrial, S-73, Sanjay Colony II, Pocket Y, Sanjay Colony, Okhla Phase II, Area, New Delhi, Delhi 110020
| Monday | 10 am – 7 pm |
| Tuesday | 10 am – 7 pm |
| Wednesday | 10 am – 7 pm |
| Thursday | 10 am – 7 pm |
| Friday | 10 am – 7 pm |
| Saturday | 10 am – 7 pm |
| Sunday | Closed |