Home › Products › Cloth gift wrap printing › Rayon crepe
Rayon crepe furoshiki printing
Furoshiki cloths on rayon crepe by reactive dyes, Okhla, Delhi: about 4 furoshiki cloths from 3 m of typical 44-inch rayon crepe.
Is rayon crepe right for furoshiki cloths?
Rayon crepe suits furoshiki cloths: it is one of the usual first choices for this job and it falls in fluid folds. Printed with reactive dyes: rich colour, slightly softened by the crepe grain.
Trade-off: Viscose-type fibres are weaker when wet: wash gently in cold water and expect a little shrinkage on the first wash. If that matters, choose cotton cambric for easier washing.
Design tips: Put a motif in each corner: the corners are tied into the knot and show on top. On rayon crepe, small all-over prints and soft florals suit the crepe grain.
Print your own design: send the artwork and the furoshiki size, and we print a sample on rayon crepe before the run. Order the printed fabric only, or ready furoshiki cloths stitched in-house.

Furoshiki cloths on rayon crepe: size and yield
| Typical finished size | 70 x 70 cm (cut 72 cm); 50 cm and 90 cm squares |
|---|---|
| On 44-inch fabric (about 108 cm usable) | 4 furoshiki cloths from 3 m (1 across × 4 down = 4 pieces of 72 × 72 cm) |
| Fabric for 10 furoshiki cloths | About 7.2 m of 44-inch fabric, before any extra for samples |
| Weight of fabric used per piece | About 57-73 g per furoshiki, before trims and packing |
| How it is counted | Pieces are counted on the usable width (fabric width less about 4 cm of selvedge) across a 3 m length, trying both directions. |
| Finishing options | Rolled or narrow hems, packed flat |
Rayon crepe at a glance
| Hand-feel and drape | Fluid, with a fine grainy crepe surface that does not cling |
|---|---|
| Sheen | Matte |
| Opacity | Semi-opaque |
| Typical weight / width | Typical 110-140 gsm; typical width 44″ |
| How the print looks | Reactive: Rich colour, slightly softened by the crepe grain |
| Care | Gentle cold wash or dry clean; may shrink if washed hot |
| Good for | Kurtis, sarees, dupattas, kaftans |
| Not ideal for | Crisp, structured shapes |
How rayon crepe meets what furoshiki cloths need
| Weight: furoshiki cloths work on very light to medium-weight fabric | Rayon crepe is light, typical 110-140 gsm, inside that range. |
|---|---|
| Opacity: furoshiki cloths need at least a semi-opaque fabric | Rayon crepe is semi-opaque. |
| Drape: furoshiki cloths handle best in a soft or fluid fabric | Rayon crepe is fluid, a match. |
On 44-inch rayon crepe, 1 cut piece of 72 cm sit across the 108 cm usable width, leaving about 36 cm (33% of the width) as offcut on every row.
Making furoshiki cloths in rayon crepe
Rayon crepe is light, so it takes the usual furoshiki finish without special handling: rolled or narrow hems.
What the print process means here
Furoshiki cloths in rayon crepe are printed with reactive dyes, because rayon crepe is a regenerated cellulose fibre; the dye bonds to the fibre, and the fabric is then steamed and washed off, so the hand of the furoshiki stays soft with no coating on top. Rayon crepe is semi-opaque, so the design shows faintly on the back of a furoshiki. Digital printing has no white ink, so any white in a furoshiki design is the colour of the rayon crepe itself.
Rayon crepe or viscose rayon for furoshiki cloths?
Against viscose rayon, rayon crepe for furoshiki cloths is matte where viscose rayon is softly lustrous. Pick rayon crepe for a more matte furoshiki; pick viscose rayon for a glossier one. See viscose rayon furoshiki cloths.
Other fabrics for furoshiki cloths
- Viscose rayon furoshiki printing: glossier than rayon crepe, about 4 from 3 m
- Cotton cambric furoshiki printing: firmer and easier-care than rayon crepe, about 4 from 3 m
- Modal furoshiki printing: glossier than rayon crepe, about 4 from 3 m
- Polyester crepe furoshiki printing: easier-care and lower-cost than rayon crepe, about 4 from 3 m
Other products in rayon crepe
- Rayon crepe hijab printing: about 1 hijab from the 3 m that makes 4 furoshiki cloths
- Rayon crepe scarf printing: about 3 scarves from the 3 m that makes 4 furoshiki cloths
- Rayon crepe saree printing
- Rayon crepe suit piece printing: about 1 suit piece from the 3 m that makes 4 furoshiki cloths
Specification
| Printing process | Reactive digital printing (steam fixed, washed off) |
|---|---|
| Fabrics | Rayon crepe |
| Typical fabric weight | Typical 110-140 gsm (typical width 44″) |
| Sizes | 70 x 70 cm (cut 72 cm); 50 cm and 90 cm squares |
| Order as | Printed fabric only, or the ready finished product, stitched and packed in-house |
| Finishing options | Rolled or narrow hems, packed flat |
| Minimum order | From 3 metres of fabric, or a few sample pieces, including finished pieces |
| Turnaround | Sample first; sample and bulk dates are confirmed with your quote |
| Care | Gentle cold wash or dry clean; may shrink if washed hot. Furoshiki cloths in rayon crepe last longest with a cold, gentle wash and drying in shade; do not wring them. |
- Any MOQ — from 3 metres, or a few sample pieces
- Competitive per-metre pricing — ask for a quote
- In-house digital printing unit at S-73, Okhla Industrial Area Phase II, New Delhi, since 1996
- In-house tailoring: printed fabric only, or the ready stitched product
Frequently asked questions
Is rayon crepe good for furoshiki cloths?
Rayon crepe suits furoshiki cloths: it is one of the usual first choices for this job and it falls in fluid folds. Viscose-type fibres are weaker when wet: wash gently in cold water and expect a little shrinkage on the first wash.
How many furoshiki cloths can I get from 3 metres of rayon crepe?
On 44-inch fabric (about 108 cm usable): 4 furoshiki cloths from 3 m (1 across × 4 down = 4 pieces of 72 × 72 cm). Fabric for 10 furoshiki cloths: about 7.2 m of 44-inch fabric, before any extra for samples. Weight of fabric used per piece: about 57-73 g per furoshiki, before trims and packing. Sizes and yields are typical; we confirm them with your quote.
Can you deliver ready furoshiki cloths in rayon crepe, or only the printed fabric?
Both: our in-house tailoring stitches the furoshiki cloths, or you take the printed rayon crepe only. Rayon crepe is light, so it takes the usual furoshiki finish without special handling: rolled or narrow hems.
How do I wash a printed rayon crepe furoshiki?
Gentle cold wash or dry clean; may shrink if washed hot. Furoshiki cloths in rayon crepe last longest with a cold, gentle wash and drying in shade; do not wring them. Reactive colour is fixed by steaming and washing-off, so it is wash-fast; the fibre decides the care.
What can I use instead of rayon crepe for furoshiki cloths?
Cotton cambric, for easier washing. Cotton cambric is light, fine and soft; a little softer than poplin.
What is the minimum order quantity for rayon crepe furoshiki cloths?
Any MOQ — from 3 metres, or a few sample pieces. 3 m of rayon crepe already makes about 4 furoshiki cloths, so a sample run can be a small batch.
How is the price of rayon crepe furoshiki cloths worked out?
Competitive per-metre pricing, quoted for your design and quantity. For furoshiki cloths, rayon crepe sits in the lower-middle cost band of the bases we print, and ready furoshiki cloths add stitching and finishing to the printed fabric.
Rayon crepe furoshiki cloths by use
Each page sets the size, quantity, finishing and care for one use.
Questions about cloth gift wrap and rayon crepe
Get a quote for rayon crepe furoshiki cloths
Send your design, the size and the quantity. We reply with the price and a sample plan.
HM International
Okhla Industrial, S-73, Sanjay Colony II, Pocket Y, Sanjay Colony, Okhla Phase II, Area, New Delhi, Delhi 110020
| Monday | 10 am – 7 pm |
| Tuesday | 10 am – 7 pm |
| Wednesday | 10 am – 7 pm |
| Thursday | 10 am – 7 pm |
| Friday | 10 am – 7 pm |
| Saturday | 10 am – 7 pm |
| Sunday | Closed |