Mon–Sat 10 am – 7 pm · Okhla Phase II, New Delhi +91 98181 98500 · info@skyfashion.in

Home › Products › Tie printing › Silk satin

Silk satin tie printing

Custom ties on silk satin, printed by reactive dyes in Okhla, Delhi: about 9 ties from 3 m of typical 44-inch silk satin. Fabric or ready-made.

Is silk satin right for ties?

Silk satin suits ties: it is one of the usual first choices for this job, real silk gives the premium feel these are bought for and its sheen makes printed colours look richer. Printed with reactive dyes: the most luminous colour we print; the sheen deepens dark shades.

Trade-off: It costs more than polyester or cotton and needs dry cleaning or a cold hand wash. If that matters, choose polyester satin for a lower cost per piece.

Design tips: Ties are cut on the bias, so allow for the 45 degree turn when you plan stripes and repeats. On silk satin, dark grounds, jewel tones and photographic prints glow; very pale designs lose the sheen effect.

Print your own design: send the artwork and the tie size, and we print a sample on silk satin before the run. Order the printed fabric only, or ready ties stitched in-house.

WhatsApp your designOr use the form

Printed satin scarf with a glossy finish

Ties on silk satin: size and yield

Typical finished sizeAbout 145-150 cm long, 7-8 cm wide at the blade
On 44-inch fabric (about 108 cm usable)9 ties from 3 m (about 0.33 m on 44-inch each)
Fabric for 10 tiesAbout 3.3 m of 44-inch fabric, before any extra for samples
Weight of fabric used per pieceAbout 25-35 g per tie (16-22 momme ≈ 69-95 gsm), before trims and packing
How it is countedBasis: a tie is cut on the bias and takes about 0.33 m of 44-inch fabric; wider fabric needs proportionally less length.
Finishing optionsBias-cut, interlined and slip-stitched ties, or printed tie fabric only

Silk satin at a glance

Hand-feel and drapeHeavy, fluid silk with a slippery face
SheenHigh lustre
OpacitySemi-opaque
Typical weight / widthTypical 16-22 momme; typical width 44″
How the print looksReactive: The most luminous colour we print; the sheen deepens dark shades
CareDry clean
Good forLuxury scarves, sarees, pocket squares, ties, scroll invitations
Not ideal forBudget runs, and items washed at home often

How silk satin meets what ties need

Weight: ties work on light to medium-weight fabricSilk satin is light, typical 16-22 momme (about 69-95 gsm), at the light end of that range.
Opacity: ties need at least a semi-opaque fabricSilk satin is semi-opaque.
Sheen: on ties, sheen lifts the colourSilk satin is high-sheen, which helps here.

Silk satin comes in a typical 44-inch width, the width the 0.33 m per tie is based on; the same tie cut from a 58-inch fabric would need about 0.25 m.

Making ties in silk satin

Silk satin is light, so it takes the usual tie finish without special handling: bias-cut, interlined and slip-stitched ties. The high-sheen face of silk satin shifts when cut and shows needle marks, so tie panels are best cut in single layers and stitched without unpicking. Silk satin shows creases, so finished ties are pressed before they are folded and packed.

What the print process means here

Ties in silk satin are printed with reactive dyes, because silk satin is silk, a protein fibre; the dye bonds to the fibre, and the fabric is then steamed and washed off, so the hand of the tie stays soft with no coating on top. Silk satin is semi-opaque, so the design shows faintly on the back of a tie. The high-sheen face deepens dark shades, so dark-ground ties look richest on silk satin. Digital printing has no white ink, so any white in a tie design is the colour of the silk satin itself.

Silk satin or silk twill for ties?

Against silk twill, silk satin for ties is high-sheen where silk twill is softly lustrous; and fluid in the hand where silk twill is soft. Pick silk satin for a glossier and more fluid tie; pick silk twill for a more matte and firmer one. See silk twill ties.

Other fabrics for ties

Other products in silk satin

Specification

Printing processReactive digital printing (steam fixed, washed off)
FabricsSilk satin / charmeuse
Typical fabric weightTypical 16-22 momme (typical width 44″)
SizesAbout 145-150 cm long, 7-8 cm wide at the blade
Order asPrinted fabric only, or the ready finished product, stitched and packed in-house
Finishing optionsBias-cut, interlined and slip-stitched ties, or printed tie fabric only
Minimum orderFrom 3 metres of fabric, or a few sample pieces, including finished pieces
TurnaroundSample first; sample and bulk dates are confirmed with your quote
CareDry clean. Ties are rarely washed: dust them or spot clean, and when silk satin must be washed, follow the care above.
  • Any MOQ — from 3 metres, or a few sample pieces
  • Competitive per-metre pricing — ask for a quote
  • In-house digital printing unit at S-73, Okhla Industrial Area Phase II, New Delhi, since 1996
  • In-house tailoring: printed fabric only, or the ready stitched product

Frequently asked questions

Is silk satin good for ties?

Silk satin suits ties: it is one of the usual first choices for this job, real silk gives the premium feel these are bought for and its sheen makes printed colours look richer. It costs more than polyester or cotton and needs dry cleaning or a cold hand wash.

How many ties can I get from 3 metres of silk satin?

On 44-inch fabric (about 108 cm usable): 9 ties from 3 m (about 0.33 m on 44-inch each). Fabric for 10 ties: about 3.3 m of 44-inch fabric, before any extra for samples. Weight of fabric used per piece: about 25-35 g per tie (16-22 momme ≈ 69-95 gsm), before trims and packing. Sizes and yields are typical; we confirm them with your quote.

Can you deliver ready ties in silk satin, or only the printed fabric?

Both: our in-house tailoring stitches the ties, or you take the printed silk satin only. Silk satin is light, so it takes the usual tie finish without special handling: bias-cut, interlined and slip-stitched ties. The high-sheen face of silk satin shifts when cut and shows needle marks, so tie panels are best cut in single layers and stitched without unpicking.

How do I wash a printed silk satin tie?

Dry clean. Ties are rarely washed: dust them or spot clean, and when silk satin must be washed, follow the care above. Reactive colour is fixed by steaming and washing-off, so it is wash-fast; the fibre decides the care.

What can I use instead of silk satin for ties?

Polyester satin, for a lower cost per piece. Polyester satin is smooth and slippery, with a fluid drape.

What is the minimum order quantity for silk satin ties?

Any MOQ — from 3 metres, or a few sample pieces. 3 m of silk satin already makes about 9 ties, so a sample run can be a small batch.

How is the price of silk satin ties worked out?

Competitive per-metre pricing, quoted for your design and quantity. For ties, silk satin sits in the highest cost band of the bases we print, and ready ties add stitching and finishing to the printed fabric.

Silk satin ties by use

Each page sets the size, quantity, finishing and care for one use.

Get a quote for silk satin ties

Send your design, the size and the quantity. We reply with the price and a sample plan.

Up to 3 files, 20 MB each — JPG, PNG, TIFF, PDF, PSD, AI, EPS, CDR or ZIP. Bigger files: send them on WhatsApp.
Or WhatsApp us

HM International

Okhla Industrial, S-73, Sanjay Colony II, Pocket Y, Sanjay Colony, Okhla Phase II, Area, New Delhi, Delhi 110020

+91 98181 98500

Monday10 am – 7 pm
Tuesday10 am – 7 pm
Wednesday10 am – 7 pm
Thursday10 am – 7 pm
Friday10 am – 7 pm
Saturday10 am – 7 pm
SundayClosed
WhatsApp us