
What pixel size should artwork for ties be?
Artwork for ties is usually a seamless repeat tile, or one panel of about 108 × 33 cm on 44-inch if the layout is engineered. 150 DPI at full size is a sensible general target for ties, moving up toward 300 DPI for very fine detail. This is general guidance, not a specification of any machine.
| Resolution (general guidance) | Pixels for a 108 × 33 cm full-width panel | Uncompressed RGB file size |
|---|---|---|
| 100 DPI | 4,252 × 1,299 px | 17 MB |
| 150 DPI | 6,378 × 1,949 px | 37 MB |
| 300 DPI | 12,756 × 3,898 px | 149 MB |
Should artwork for ties be a repeat or an engineered panel?
For ties: a tie is cut on the bias, so the print turns by 45 degrees on the finished tie: a straight stripe on the fabric becomes a diagonal one on the tie. Small, regular repeats work best, because only a narrow blade shows. Check the repeat at actual size, as a large motif may never appear whole.
How much hem or seam allowance does artwork for ties need?
For ties, a tie is cut on the bias and takes about 0.33 m of 44-inch fabric, so a whole-panel layout is about 108 × 33 cm on 44-inch; seam allowances come from your pattern.
Which fabrics change how artwork for ties looks?
For ties, no listed base badly breaks up line work, while silk twill, silk satin and polyester satin show fine detail and deep colour well.