Mon–Sat 10 am – 7 pm · Okhla Phase II, New Delhi +91 98181 98500 · info@skyfashion.in

Home › Products › Bunting printing › Polyester satin

Polyester satin bunting pennant printing

Bunting pennants on polyester satin by sublimation, Okhla, Delhi: about 120 bunting pennants from 3 m of typical 58-inch polyester satin.

Is polyester satin right for bunting pennants?

Polyester satin suits bunting pennants: it is one of the usual first choices for this job, sublimated colour sits inside the fibre and stands up to sun and wind and it keeps the cost per piece low. Printed with sublimation: the brightest, sharpest colour of all; the dye is inside the fibre, so it cannot crack.

Trade-off: The high sheen can glare under strong light and shows every crease. If that matters, choose polyester spun for a matte look.

Design tips: Plan one pennant per letter or image, in the order the string is hung. On polyester satin, bright, saturated colours and dark grounds look glossy and rich.

Print your own design: send the artwork and the bunting pennant size, and we print a sample on polyester satin before the run. Order the printed fabric only, or ready bunting pennants stitched in-house.

WhatsApp your designOr use the form

Printed satin scarf with a glossy finish

Bunting pennants on polyester satin: size and yield

Typical finished sizeTriangle pennants about 20 x 28 cm, nested point-up and point-down (2 per 22 x 30 cm)
On 58-inch fabric (about 143 cm usable)120 bunting pennants from 3 m (6 across × 10 down = 60 pieces of 22 × 30 cm; 2 bunting pennants per piece)
Fabric for 50 bunting pennantsAbout 1.5 m of 58-inch fabric, before any extra for samples
Weight of fabric used per pieceAbout 3-4 g per bunting pennant, before trims and packing
How it is countedPieces are counted on the usable width (fabric width less about 4 cm of selvedge) across a 3 m length, trying both directions.
Finishing optionsPennants hemmed or heat-cut, stitched onto tape with tie ends, two-layer pennants

Polyester satin at a glance

Hand-feel and drapeSmooth and slippery, with a fluid drape
SheenHigh sheen
OpacityOpaque at typical weights
Typical weight / widthTypical 90-120 gsm; typical width 58″
How the print looksSublimation: The brightest, sharpest colour of all; the dye is inside the fibre, so it cannot crack
CareCool machine wash; iron on the reverse on low heat
Good forScarves, scroll invitations, table flags, linings, pooja cloth, cushion covers
Not ideal forNapkins and towels (low absorbency)

How polyester satin meets what bunting pennants need

Weight: bunting pennants work on very light to medium-weight fabricPolyester satin is light, typical 90-120 gsm, inside that range.
Opacity: bunting pennants can be sheerPolyester satin is opaque with room to spare.
Outdoors: bunting pennants face sun and windPolyester satin is sublimated polyester, so the colour is inside the fibre.

On 58-inch polyester satin, 6 cut pieces of 22 cm sit across the 143 cm usable width, leaving about 11 cm (8% of the width) as offcut on every row.

Making bunting pennants in polyester satin

Polyester satin is light, so it takes the usual bunting pennant finish without special handling: pennants hemmed or heat-cut. The high-sheen face of polyester satin shifts when cut and shows needle marks, so bunting pennant panels are best cut in single layers and stitched without unpicking. Polyester satin shows creases, so finished bunting pennants are pressed before they are folded and packed.

What the print process means here

Bunting pennants in polyester satin are printed by sublimation, the process for polyester: heat turns the dye to a gas that enters the fibre, so the colour stands up to sun and wind on bunting pennants. Polyester satin is opaque, so the reverse of a bunting pennant stays much paler than the printed face; order a two-layer bunting pennant if both sides must show the design. The high-sheen face deepens dark shades, so dark-ground bunting pennants look richest on polyester satin. Digital printing has no white ink, so any white in a bunting pennant design is the colour of the polyester satin itself.

Polyester satin or peach-finish polyester for bunting pennants?

Against peach-finish polyester, polyester satin for bunting pennants is high-sheen where peach-finish polyester is matte; and fluid in the hand where peach-finish polyester is soft. Pick polyester satin for a glossier and more fluid bunting pennant; pick peach-finish polyester for a more matte and firmer one. See peach-finish polyester bunting pennants.

Other fabrics for bunting pennants

Other products in polyester satin

Specification

Printing processSublimation on polyester (two Mimaki printers)
FabricsPolyester satin
Typical fabric weightTypical 90-120 gsm (typical width 58″)
SizesTriangle pennants about 20 x 28 cm, nested point-up and point-down (2 per 22 x 30 cm)
Order asPrinted fabric only, or the ready finished product, stitched and packed in-house
Finishing optionsPennants hemmed or heat-cut, stitched onto tape with tie ends, two-layer pennants
Minimum orderFrom 3 metres of fabric, or a few sample pieces, including finished pieces
TurnaroundSample first; sample and bulk dates are confirmed with your quote
CareCool machine wash; iron on the reverse on low heat. Bunting pennants spend time outdoors; take polyester satin in from heavy rain and wash off dust in cold water.
  • Any MOQ — from 3 metres, or a few sample pieces
  • Competitive per-metre pricing — ask for a quote
  • In-house digital printing unit at S-73, Okhla Industrial Area Phase II, New Delhi, since 1996
  • In-house tailoring: printed fabric only, or the ready stitched product

Frequently asked questions

Is polyester satin good for bunting pennants?

Polyester satin suits bunting pennants: it is one of the usual first choices for this job, sublimated colour sits inside the fibre and stands up to sun and wind and it keeps the cost per piece low. The high sheen can glare under strong light and shows every crease.

How many bunting pennants can I get from 3 metres of polyester satin?

On 58-inch fabric (about 143 cm usable): 120 bunting pennants from 3 m (6 across × 10 down = 60 pieces of 22 × 30 cm; 2 bunting pennants per piece). Fabric for 50 bunting pennants: about 1.5 m of 58-inch fabric, before any extra for samples. Weight of fabric used per piece: about 3-4 g per bunting pennant, before trims and packing. Sizes and yields are typical; we confirm them with your quote.

Can you deliver ready bunting pennants in polyester satin, or only the printed fabric?

Both: our in-house tailoring stitches the bunting pennants, or you take the printed polyester satin only. Polyester satin is light, so it takes the usual bunting pennant finish without special handling: pennants hemmed or heat-cut. The high-sheen face of polyester satin shifts when cut and shows needle marks, so bunting pennant panels are best cut in single layers and stitched without unpicking.

How do I wash a printed polyester satin bunting pennant?

Cool machine wash; iron on the reverse on low heat. Bunting pennants spend time outdoors; take polyester satin in from heavy rain and wash off dust in cold water. Sublimated colour is inside the polyester fibre, so it does not crack or peel.

What can I use instead of polyester satin for bunting pennants?

Polyester spun, for a matte look. Polyester spun is medium weight, soft and cotton-like.

How does polyester satin compare with polyester crepe for bunting pennants?

Against polyester crepe, polyester satin for bunting pennants is opaque where polyester crepe is semi-opaque; and high-sheen where polyester crepe is matte. Pick polyester satin for a more opaque and glossier bunting pennant; pick polyester crepe for a sheerer and more matte one.

What is the minimum order quantity for polyester satin bunting pennants?

Any MOQ — from 3 metres, or a few sample pieces. 3 m of polyester satin already makes about 120 bunting pennants, so a sample run can be a small batch.

How is the price of polyester satin bunting pennants worked out?

Competitive per-metre pricing, quoted for your design and quantity. For bunting pennants, polyester satin sits in the lowest cost band of the bases we print, and ready bunting pennants add stitching and finishing to the printed fabric.

Polyester satin bunting pennants by use

Each page sets the size, quantity, finishing and care for one use.

Get a quote for polyester satin bunting pennants

Send your design, the size and the quantity. We reply with the price and a sample plan.

Up to 3 files, 20 MB each — JPG, PNG, TIFF, PDF, PSD, AI, EPS, CDR or ZIP. Bigger files: send them on WhatsApp.
Or WhatsApp us

HM International

Okhla Industrial, S-73, Sanjay Colony II, Pocket Y, Sanjay Colony, Okhla Phase II, Area, New Delhi, Delhi 110020

+91 98181 98500

Monday10 am – 7 pm
Tuesday10 am – 7 pm
Wednesday10 am – 7 pm
Thursday10 am – 7 pm
Friday10 am – 7 pm
Saturday10 am – 7 pm
SundayClosed
WhatsApp us