Mon–Sat 10 am – 7 pm · Okhla Phase II, New Delhi +91 98181 98500 · info@skyfashion.in

Home › Products › Wall tapestry printing › Polyester roto

Polyester roto wall tapestry printing

Wall tapestries on polyester roto by sublimation, Okhla, Delhi: about 1 wall tapestry from 3 m of typical 58-inch polyester roto.

Is polyester roto right for wall tapestries?

Polyester roto suits wall tapestries: its matte face shows the design without glare and it keeps the cost per piece low. Printed with sublimation: bright colour on a cotton-look surface.

Trade-off: Its crisp hand does not drape as softly as spun polyester or crepe.

Design tips: Leave 3-4 cm clear for hems and the hanging pocket. On polyester roto, logos, stripes and bright repeats print crisp and even.

Print your own design: send the artwork and the wall tapestry size, and we print a sample on polyester roto before the run. Order the printed fabric only, or ready wall tapestries stitched in-house.

WhatsApp your designOr use the form

Swirl design printing on polyester fabric

Wall tapestries on polyester roto: size and yield

Typical finished sizeAbout 130 x 150 cm (cut 134 x 156 cm), or your size
On 44-inch fabric (about 108 cm usable)One wall tapestry needs about 3.12 m (134 cm wide needs 2 drops of 156 cm = 3.12 m); 3 m covers a sample
On 58-inch fabric (about 143 cm usable)1 wall tapestry from 3 m (134 cm wide needs 1 drop of 156 cm = 1.56 m)
Fabric for 10 wall tapestriesAbout 15.6 m of 58-inch fabric, before any extra for samples
How it is countedBasis: where the piece is wider than the fabric, full-length drops are joined side by side.
Finishing optionsHemmed edges, rod pocket or hanging loops, tassel trims on request

Polyester roto at a glance

Hand-feel and drapeMedium weight, with a cotton-like, slightly crisp feel
SheenMatte
OpacityOpaque
Typical weight / widthTypical medium weight; typical width 44-58″
How the print looksSublimation: Bright colour on a cotton-look surface
CareMachine wash; dries quickly, needs little ironing
Good forUniforms, shirts, aprons, backdrops
Not ideal forFluid drapes

How polyester roto meets what wall tapestries need

Weight: wall tapestries work on light to very heavy fabricPolyester roto is medium-weight, typical medium weight, inside that range.
Opacity: wall tapestries need an opaque fabricPolyester roto is opaque.
Sheen: on wall tapestries, a matte face avoids glarePolyester roto is matte, which helps here.

A 134 cm wide wall tapestry fits inside the 143 cm usable width of 58-inch polyester roto, so it needs no joining seam.

Making wall tapestries in polyester roto

Polyester roto is medium-weight, so it takes the usual wall tapestry finish without special handling: hemmed edges.

What the print process means here

Wall tapestries in polyester roto are printed by sublimation, the process for polyester: heat turns the dye to a gas that enters the fibre, so nothing sits on the surface to crack when the wall tapestry is folded. Polyester roto is opaque, so the reverse of a wall tapestry stays much paler than the printed face. Digital printing has no white ink, so any white in a wall tapestry design is the colour of the polyester roto itself.

Polyester roto or polyester spun for wall tapestries?

Against polyester spun, polyester roto for wall tapestries is crisp in the hand where polyester spun is soft. Pick polyester roto for a crisper wall tapestry; pick polyester spun for a softer one. See polyester spun wall tapestries.

Other fabrics for wall tapestries

Other products in polyester roto

Specification

Printing processSublimation on polyester (two Mimaki printers)
FabricsPolyester roto
Typical fabric weightTypical medium weight (typical width 44-58″)
SizesAbout 130 x 150 cm (cut 134 x 156 cm), or your size
Order asPrinted fabric only, or the ready finished product, stitched and packed in-house
Finishing optionsHemmed edges, rod pocket or hanging loops, tassel trims on request
Minimum orderFrom 3 metres of fabric, or a few sample pieces, including finished pieces
TurnaroundSample first; sample and bulk dates are confirmed with your quote
CareMachine wash; dries quickly, needs little ironing. Wall tapestries are rarely washed: dust them or spot clean, and when polyester roto must be washed, follow the care above.
  • Any MOQ — from 3 metres, or a few sample pieces
  • Competitive per-metre pricing — ask for a quote
  • In-house digital printing unit at S-73, Okhla Industrial Area Phase II, New Delhi, since 1996
  • In-house tailoring: printed fabric only, or the ready stitched product

Frequently asked questions

Is polyester roto good for wall tapestries?

Polyester roto suits wall tapestries: its matte face shows the design without glare and it keeps the cost per piece low. Its crisp hand does not drape as softly as spun polyester or crepe.

How many wall tapestries can I get from 3 metres of polyester roto?

On 44-inch fabric (about 108 cm usable): One wall tapestry needs about 3.12 m (134 cm wide needs 2 drops of 156 cm = 3.12 m); 3 m covers a sample. On 58-inch fabric (about 143 cm usable): 1 wall tapestry from 3 m (134 cm wide needs 1 drop of 156 cm = 1.56 m). Fabric for 10 wall tapestries: about 15.6 m of 58-inch fabric, before any extra for samples. Sizes and yields are typical; we confirm them with your quote.

Can you deliver ready wall tapestries in polyester roto, or only the printed fabric?

Both: our in-house tailoring stitches the wall tapestries, or you take the printed polyester roto only. Polyester roto is medium-weight, so it takes the usual wall tapestry finish without special handling: hemmed edges.

How do I wash a printed polyester roto wall tapestry?

Machine wash; dries quickly, needs little ironing. Wall tapestries are rarely washed: dust them or spot clean, and when polyester roto must be washed, follow the care above. Sublimated colour is inside the polyester fibre, so it does not crack or peel.

How does polyester roto compare with peach-finish polyester for wall tapestries?

Against peach-finish polyester, polyester roto for wall tapestries is heavier (typical medium weight against 80-120 gsm); and crisp in the hand where peach-finish polyester is soft. Pick polyester roto for a heavier and crisper wall tapestry; pick peach-finish polyester for a lighter and softer one.

What is the minimum order quantity for polyester roto wall tapestries?

Any MOQ — from 3 metres, or a few sample pieces. 3 m of polyester roto already makes about 1 wall tapestry, so a sample run can be a small batch.

How is the price of polyester roto wall tapestries worked out?

Competitive per-metre pricing, quoted for your design and quantity. For wall tapestries, polyester roto sits in the lowest cost band of the bases we print, and ready wall tapestries add stitching and finishing to the printed fabric.

Polyester roto wall tapestries by use

Each page sets the size, quantity, finishing and care for one use.

Get a quote for polyester roto wall tapestries

Send your design, the size and the quantity. We reply with the price and a sample plan.

Up to 3 files, 20 MB each — JPG, PNG, TIFF, PDF, PSD, AI, EPS, CDR or ZIP. Bigger files: send them on WhatsApp.
Or WhatsApp us

HM International

Okhla Industrial, S-73, Sanjay Colony II, Pocket Y, Sanjay Colony, Okhla Phase II, Area, New Delhi, Delhi 110020

+91 98181 98500

Monday10 am – 7 pm
Tuesday10 am – 7 pm
Wednesday10 am – 7 pm
Thursday10 am – 7 pm
Friday10 am – 7 pm
Saturday10 am – 7 pm
SundayClosed
WhatsApp us