Mon–Sat 10 am – 7 pm · Okhla Phase II, New Delhi +91 98181 98500 · info@skyfashion.in

Home › Products › Cloth gift wrap printing › Polyester crepe

Polyester crepe furoshiki printing

Furoshiki cloths on polyester crepe by sublimation, Okhla, Delhi: about 4 furoshiki cloths from 3 m of typical 58-inch polyester crepe.

Is polyester crepe right for furoshiki cloths?

Polyester crepe suits furoshiki cloths: it is one of the usual first choices for this job, it falls in fluid folds and it keeps the cost per piece low. Printed with sublimation: bright colour, slightly softened by the crepe grain.

Trade-off: The crepe grain softens very fine lines slightly. If that matters, choose cotton cambric for sharper fine detail.

Design tips: Put a motif in each corner: the corners are tied into the knot and show on top. On polyester crepe, all-over florals and small repeats suit the grainy surface.

Print your own design: send the artwork and the furoshiki size, and we print a sample on polyester crepe before the run. Order the printed fabric only, or ready furoshiki cloths stitched in-house.

WhatsApp your designOr use the form

Swirl design printing on polyester fabric

Furoshiki cloths on polyester crepe: size and yield

Typical finished size70 x 70 cm (cut 72 cm); 50 cm and 90 cm squares
On 58-inch fabric (about 143 cm usable)4 furoshiki cloths from 3 m (1 across × 4 down = 4 pieces of 72 × 72 cm)
Fabric for 10 furoshiki clothsAbout 7.2 m of 58-inch fabric, before any extra for samples
Weight of fabric used per pieceAbout 52-73 g per furoshiki, before trims and packing
How it is countedPieces are counted on the usable width (fabric width less about 4 cm of selvedge) across a 3 m length, trying both directions.
Finishing optionsRolled or narrow hems, packed flat

Polyester crepe at a glance

Hand-feel and drapeFluid, with a grainy crepe surface that resists creasing
SheenMatte
OpacitySemi-opaque
Typical weight / widthTypical 100-140 gsm; typical width 58″
How the print looksSublimation: Bright colour, slightly softened by the crepe grain
CareCool wash; cool iron
Good forSarees, kurtis, hijabs, kaftans, furoshiki
Not ideal forStiff items

How polyester crepe meets what furoshiki cloths need

Weight: furoshiki cloths work on very light to medium-weight fabricPolyester crepe is light, typical 100-140 gsm, inside that range.
Opacity: furoshiki cloths need at least a semi-opaque fabricPolyester crepe is semi-opaque.
Drape: furoshiki cloths handle best in a soft or fluid fabricPolyester crepe is fluid, a match.

On 58-inch polyester crepe, 1 cut piece of 72 cm sit across the 143 cm usable width, leaving about 71 cm (50% of the width) as offcut on every row.

Making furoshiki cloths in polyester crepe

Polyester crepe is light, so it takes the usual furoshiki finish without special handling: rolled or narrow hems.

What the print process means here

Furoshiki cloths in polyester crepe are printed by sublimation, the process for polyester: heat turns the dye to a gas that enters the fibre, so nothing sits on the surface to crack when the furoshiki is folded. Polyester crepe is semi-opaque, so the design shows faintly on the back of a furoshiki. Digital printing has no white ink, so any white in a furoshiki design is the colour of the polyester crepe itself.

Polyester crepe or rayon crepe for furoshiki cloths?

Against rayon crepe, polyester crepe for furoshiki cloths is polyester where rayon crepe is regenerated cellulose; easy-care polyester (cool machine wash, dries fast) where rayon crepe is a gentle-wash fibre (weaker when wet); and lower in cost. Pick polyester crepe for an easier-care and lower-cost furoshiki; pick rayon crepe for a natural-fibre one. See rayon crepe furoshiki cloths.

Other fabrics for furoshiki cloths

Other products in polyester crepe

Specification

Printing processSublimation on polyester (two Mimaki printers)
FabricsPolyester crepe
Typical fabric weightTypical 100-140 gsm (typical width 58″)
Sizes70 x 70 cm (cut 72 cm); 50 cm and 90 cm squares
Order asPrinted fabric only, or the ready finished product, stitched and packed in-house
Finishing optionsRolled or narrow hems, packed flat
Minimum orderFrom 3 metres of fabric, or a few sample pieces, including finished pieces
TurnaroundSample first; sample and bulk dates are confirmed with your quote
CareCool wash; cool iron. Furoshiki cloths in polyester crepe wash cool, dry fast and need little ironing.
  • Any MOQ — from 3 metres, or a few sample pieces
  • Competitive per-metre pricing — ask for a quote
  • In-house digital printing unit at S-73, Okhla Industrial Area Phase II, New Delhi, since 1996
  • In-house tailoring: printed fabric only, or the ready stitched product

Frequently asked questions

Is polyester crepe good for furoshiki cloths?

Polyester crepe suits furoshiki cloths: it is one of the usual first choices for this job, it falls in fluid folds and it keeps the cost per piece low. The crepe grain softens very fine lines slightly.

How many furoshiki cloths can I get from 3 metres of polyester crepe?

On 58-inch fabric (about 143 cm usable): 4 furoshiki cloths from 3 m (1 across × 4 down = 4 pieces of 72 × 72 cm). Fabric for 10 furoshiki cloths: about 7.2 m of 58-inch fabric, before any extra for samples. Weight of fabric used per piece: about 52-73 g per furoshiki, before trims and packing. Sizes and yields are typical; we confirm them with your quote.

Can you deliver ready furoshiki cloths in polyester crepe, or only the printed fabric?

Both: our in-house tailoring stitches the furoshiki cloths, or you take the printed polyester crepe only. Polyester crepe is light, so it takes the usual furoshiki finish without special handling: rolled or narrow hems.

How do I wash a printed polyester crepe furoshiki?

Cool wash; cool iron. Furoshiki cloths in polyester crepe wash cool, dry fast and need little ironing. Sublimated colour is inside the polyester fibre, so it does not crack or peel.

What can I use instead of polyester crepe for furoshiki cloths?

Cotton cambric, for sharper fine detail. Cotton cambric is light, fine and soft; a little softer than poplin.

How does polyester crepe compare with peach-finish polyester for furoshiki cloths?

Against peach-finish polyester, polyester crepe for furoshiki cloths is semi-opaque where peach-finish polyester is opaque; and fluid in the hand where peach-finish polyester is soft. Pick polyester crepe for a sheerer and more fluid furoshiki; pick peach-finish polyester for a more opaque and firmer one.

What is the minimum order quantity for polyester crepe furoshiki cloths?

Any MOQ — from 3 metres, or a few sample pieces. 3 m of polyester crepe already makes about 4 furoshiki cloths, so a sample run can be a small batch.

How is the price of polyester crepe furoshiki cloths worked out?

Competitive per-metre pricing, quoted for your design and quantity. For furoshiki cloths, polyester crepe sits in the lowest cost band of the bases we print, and ready furoshiki cloths add stitching and finishing to the printed fabric.

Get a quote for polyester crepe furoshiki cloths

Send your design, the size and the quantity. We reply with the price and a sample plan.

Up to 3 files, 20 MB each — JPG, PNG, TIFF, PDF, PSD, AI, EPS, CDR or ZIP. Bigger files: send them on WhatsApp.
Or WhatsApp us

HM International

Okhla Industrial, S-73, Sanjay Colony II, Pocket Y, Sanjay Colony, Okhla Phase II, Area, New Delhi, Delhi 110020

+91 98181 98500

Monday10 am – 7 pm
Tuesday10 am – 7 pm
Wednesday10 am – 7 pm
Thursday10 am – 7 pm
Friday10 am – 7 pm
Saturday10 am – 7 pm
SundayClosed
WhatsApp us