Mon–Sat 10 am – 7 pm · Okhla Phase II, New Delhi +91 98181 98500 · info@skyfashion.in

Home › Products › Flag printing › Polyester spun

Polyester spun flag printing

Custom flags on polyester spun, printed by sublimation in Okhla, Delhi: about 6 flags from 3 m of typical 58-inch polyester spun. Fabric or ready-made.

Is polyester spun right for flags?

Polyester spun suits flags: it is one of the usual first choices for this job, sublimated colour sits inside the fibre and stands up to sun and wind and it keeps the cost per piece low. Printed with sublimation: bright, even colour; logos and text print crisp.

Trade-off: It is at the heavy end for flags: more body, but stiffer to stitch and fold. If that matters, choose polyester satin for a lighter, softer piece.

Design tips: Keep logos away from the pole sleeve and allow 2 cm for hems on the fly edge. On polyester spun, logos, text and flat brand colours print crisp and even.

Print your own design: send the artwork and the flag size, and we print a sample on polyester spun before the run. Order the printed fabric only, or ready flags stitched in-house.

WhatsApp your designOr use the form

Large panel printing on polyester fabric

Flags on polyester spun: size and yield

Typical finished size60 x 90 cm (cut 64 x 98 cm with hem and pole sleeve); 90 x 150 cm or your size
On 58-inch fabric (about 143 cm usable)6 flags from 3 m (2 across × 3 down = 6 pieces of 64 × 98 cm)
Fabric for 10 flagsAbout 4.9 m of 58-inch fabric, before any extra for samples
Weight of fabric used per pieceAbout 75-113 g per flag, before trims and packing
How it is countedPieces are counted on the usable width (fabric width less about 4 cm of selvedge) across a 3 m length, trying both directions.
Finishing optionsDouble-stitched hems, pole sleeve, grommets or ties, two-layer double-sided flags

Polyester spun at a glance

Hand-feel and drapeMedium weight, soft and cotton-like
SheenMatte
OpacityOpaque
Typical weight / widthTypical 120-180 gsm; typical width 58″
How the print looksSublimation: Bright, even colour; logos and text print crisp
CareCool machine wash; dries quickly
Good forFlags, backdrops, table flags, napkins, aprons
Not ideal forLuxury silk-look items

How polyester spun meets what flags need

Weight: flags work on very light to medium-weight fabricPolyester spun is medium-weight, typical 120-180 gsm, at the heavy end of that range.
Opacity: flags can be sheerPolyester spun is opaque with room to spare.
Outdoors: flags face sun and windPolyester spun is sublimated polyester, so the colour is inside the fibre.

On 58-inch polyester spun, 2 cut pieces of 64 cm sit across the 143 cm usable width, leaving about 15 cm (10% of the width) as offcut on every row.

Making flags in polyester spun

Polyester spun is medium-weight, so it takes the usual flag finish without special handling: double-stitched hems.

What the print process means here

Flags in polyester spun are printed by sublimation, the process for polyester: heat turns the dye to a gas that enters the fibre, so the colour stands up to sun and wind on flags. Polyester spun is opaque, so the reverse of a flag stays much paler than the printed face; order a two-layer flag if both sides must show the design. Digital printing has no white ink, so any white in a flag design is the colour of the polyester spun itself.

Polyester spun or polyester roto for flags?

Against polyester roto, polyester spun for flags is soft in the hand where polyester roto is crisp. Pick polyester spun for a softer flag; pick polyester roto for a crisper one. See polyester roto flags.

Other fabrics for flags

Other products in polyester spun

Specification

Printing processSublimation on polyester (two Mimaki printers)
FabricsPolyester spun
Typical fabric weightTypical 120-180 gsm (typical width 58″)
Sizes60 x 90 cm (cut 64 x 98 cm with hem and pole sleeve); 90 x 150 cm or your size
Order asPrinted fabric only, or the ready finished product, stitched and packed in-house
Finishing optionsDouble-stitched hems, pole sleeve, grommets or ties, two-layer double-sided flags
Minimum orderFrom 3 metres of fabric, or a few sample pieces, including finished pieces
TurnaroundSample first; sample and bulk dates are confirmed with your quote
CareCool machine wash; dries quickly. Flags spend time outdoors; take polyester spun in from heavy rain and wash off dust in cold water.
  • Any MOQ — from 3 metres, or a few sample pieces
  • Competitive per-metre pricing — ask for a quote
  • In-house digital printing unit at S-73, Okhla Industrial Area Phase II, New Delhi, since 1996
  • In-house tailoring: printed fabric only, or the ready stitched product

Frequently asked questions

Is polyester spun good for flags?

Polyester spun suits flags: it is one of the usual first choices for this job, sublimated colour sits inside the fibre and stands up to sun and wind and it keeps the cost per piece low. It is at the heavy end for flags: more body, but stiffer to stitch and fold.

How many flags can I get from 3 metres of polyester spun?

On 58-inch fabric (about 143 cm usable): 6 flags from 3 m (2 across × 3 down = 6 pieces of 64 × 98 cm). Fabric for 10 flags: about 4.9 m of 58-inch fabric, before any extra for samples. Weight of fabric used per piece: about 75-113 g per flag, before trims and packing. Sizes and yields are typical; we confirm them with your quote.

Can you deliver ready flags in polyester spun, or only the printed fabric?

Both: our in-house tailoring stitches the flags, or you take the printed polyester spun only. Polyester spun is medium-weight, so it takes the usual flag finish without special handling: double-stitched hems.

How do I wash a printed polyester spun flag?

Cool machine wash; dries quickly. Flags spend time outdoors; take polyester spun in from heavy rain and wash off dust in cold water. Sublimated colour is inside the polyester fibre, so it does not crack or peel.

What can I use instead of polyester spun for flags?

Polyester satin, for a lighter, softer piece. Polyester satin is smooth and slippery, with a fluid drape.

How does polyester spun compare with peach-finish polyester for flags?

Against peach-finish polyester, polyester spun for flags is heavier (typical 120-180 gsm against 80-120 gsm). Pick polyester spun for a heavier flag; pick peach-finish polyester for a lighter one.

What is the minimum order quantity for polyester spun flags?

Any MOQ — from 3 metres, or a few sample pieces. 3 m of polyester spun already makes about 6 flags, so a sample run can be a small batch.

How is the price of polyester spun flags worked out?

Competitive per-metre pricing, quoted for your design and quantity. For flags, polyester spun sits in the lowest cost band of the bases we print, and ready flags add stitching and finishing to the printed fabric.

Get a quote for polyester spun flags

Send your design, the size and the quantity. We reply with the price and a sample plan.

Up to 3 files, 20 MB each — JPG, PNG, TIFF, PDF, PSD, AI, EPS, CDR or ZIP. Bigger files: send them on WhatsApp.
Or WhatsApp us

HM International

Okhla Industrial, S-73, Sanjay Colony II, Pocket Y, Sanjay Colony, Okhla Phase II, Area, New Delhi, Delhi 110020

+91 98181 98500

Monday10 am – 7 pm
Tuesday10 am – 7 pm
Wednesday10 am – 7 pm
Thursday10 am – 7 pm
Friday10 am – 7 pm
Saturday10 am – 7 pm
SundayClosed
WhatsApp us