
What pixel size should artwork for furoshiki cloths be?
Artwork for furoshiki cloths should be made at the 72 × 72 cm cut size, not the 70 × 70 cm finished size. 150 DPI at full size is a sensible general target for furoshiki cloths, moving up toward 300 DPI for very fine detail. This is general guidance, not a specification of any machine.
| Resolution (general guidance) | Pixels for a 72 × 72 cm cut panel | Uncompressed RGB file size |
|---|---|---|
| 100 DPI | 2,835 × 2,835 px | 24 MB |
| 150 DPI | 4,252 × 4,252 px | 54 MB |
| 300 DPI | 8,504 × 8,504 px | 217 MB |
Should artwork for furoshiki cloths be a placement or a repeat?
For furoshiki cloths: a furoshiki is tied, so the corners end up on top and the centre ends up hidden. A motif in each corner works best, and the design should still look good from the reverse if it is sheer. Fabric should knot easily, so check the design on a real tie.
How much hem or seam allowance does artwork for furoshiki cloths need?
A 70 × 70 cm finished furoshiki is cut at 72 × 72 cm, which is 1 cm per side across the width and 1 cm per side along the length.
Which fabrics change how artwork for furoshiki cloths looks?
For furoshiki cloths, rayon crepe, polyester crepe and cotton slub break up very fine lines, while cotton satin, viscose rayon and modal show fine detail and deep colour well.