Mon–Sat 10 am – 7 pm · Okhla Phase II, New Delhi +91 98181 98500 · info@skyfashion.in

Home › Guides › Best fabric for ties

What is the best fabric for ties?

For ties, silk twill is the best first choice: it holds small repeats sharply and knots firmly. Silk satin comes next: its lustre gives the richest look at a formal event. Avoid cotton voile: it is sheer and too limp to make a knot.

Custom printed silk neckties

Which fabric is best for ties?

For ties, the ranking below starts from what the job needs and the fabrics we print. Weights are typical, and metres are computed from the real size: about 145-150 cm long, 7-8 cm wide at the blade.

RankFabricProcessWhyMetres for 100Typical fabric per tie
1Silk twillReactiveIt holds small repeats sharply and knots firmlyAbout 33 m19-25 g
2Silk satinReactiveIts lustre gives the richest look at a formal eventAbout 33 m25-35 g
3Polyester satinSublimationIt keeps the shine at a lower cost for club or company tiesAbout 24.9 m33-44 g

What do ties ask of the fabric?

A tie is cut on the bias, knotted over and over and looked at closely. It needs a firm, smooth face for small geometry and enough body to keep a good knot.

Which fabrics should you avoid for ties?

For ties, skip these even if the price or the look tempts you.

FabricWhy notTypical fabric per tie
Cotton voileIt is sheer and too limp to make a knot22-29 g
Cotton canvasIt is far too thick, so the knot turns bulky92-147 g
Polyester chiffonIt is thin and shifts, so it will not lie flat15-22 g

How far does each top fabric go for ties?

For ties, the top 3 go as far as the table shows, at the widest typical width. Plan samples and spares on top.

FabricWidthLayoutFrom 3 mMetres for 100Typical fabric for 100 ties
Silk twill44-inch0.33 m each9About 33 m1.9-2.5 kg
Silk satin44-inch0.33 m each9About 33 m2.5-3.5 kg
Polyester satin58-inch0.25 m each12About 24.9 m3.3-4.4 kg

Does the print process change with the fabric for ties?

For ties, this list mixes both dye routes: polyester satin by sublimation, and silk twill and silk satin by reactive dye. A colour match on one route does not carry over to the other, so sample each one you are weighing.

Frequently asked questions

Why does one tie take about a third of a metre?

A tie is cut on the 45 degree bias, which leaves waste at the corners, so fewer fit on a metre than a straight cut suggests. Plan stripes for that turn too.

What is the downside of silk twill for ties?

It costs more than polyester or cotton and needs dry cleaning or a cold hand wash.

Which fabric keeps ties lightest?

Silk twill, at a typical 19-25 g per tie.

Which is the lower-cost base for ties?

Polyester satin is the lowest-cost base on this list. The order still depends on quantity and finishing, so ask us for a quote.

Can I get ready ties, not only printed fabric?

Yes. Order the printed fabric only, or the ready tie from our in-house tailoring: bias-cut, interlined and slip-stitched ties, or printed tie fabric only.

Is there a minimum order quantity (MOQ)?

Any MOQ is fine: we print from as little as 3 metres, and sample pieces too, up to bulk.

What is your price per metre?

Competitive per-metre pricing. Ask for a quote with your fabric, design and quantity and we reply with the price.

Get a quote

Send your design, fabric and quantity. We reply with the price and a sample plan.

Up to 3 files, 20 MB each — JPG, PNG, TIFF, PDF, PSD, AI, EPS, CDR or ZIP. Bigger files: send them on WhatsApp.
Or WhatsApp us

HM International

Okhla Industrial, S-73, Sanjay Colony II, Pocket Y, Sanjay Colony, Okhla Phase II, Area, New Delhi, Delhi 110020

+91 98181 98500

Monday10 am – 7 pm
Tuesday10 am – 7 pm
Wednesday10 am – 7 pm
Thursday10 am – 7 pm
Friday10 am – 7 pm
Saturday10 am – 7 pm
SundayClosed
WhatsApp us