
What pixel size should artwork for sarees be?
Artwork for sarees should be planned as one length of about 108 × 630 cm on 44-inch fabric, or a repeat tile if the design is all-over. 150 DPI is a sensible general target for sarees, and 100 DPI can work for artwork seen from a distance. This is general guidance, not a specification of any machine.
| Resolution (general guidance) | Pixels for a 108 × 630 cm full length | Uncompressed RGB file size |
|---|---|---|
| 100 DPI | 4,252 × 24,803 px | 316 MB |
| 150 DPI | 6,378 × 37,205 px | 712 MB |
| 300 DPI | 12,756 × 74,409 px | 2,847 MB |
Should artwork for sarees be a repeat or an engineered panel?
For sarees: a saree file is one long layout, with the pallu at one end, the running body in the middle and the blouse piece at the other. Border widths should be drawn to the fabric’s full height, because the fabric width becomes the saree’s height when worn. Note the pallu’s start position on your layout.
How much hem or seam allowance does artwork for sarees need?
For sarees, each piece is a cut length of about 6.3 m, and the fabric width becomes the saree’s height, so the file runs the full length plus the side margins you want.
Which fabrics change how artwork for sarees looks?
For sarees, cotton muslin, rayon crepe and polyester crepe break up very fine lines, while silk habutai, silk satin and tussar silk show fine detail and deep colour well.