Mon–Sat 10 am – 7 pm · Okhla Phase II, New Delhi +91 98181 98500 · info@skyfashion.in

Home › Products › Flag printing › Knitted polyester › Knitted polyester flags for outdoor poles

Knitted polyester flags for outdoor poles

Flags for outdoor poles on knitted polyester, printed by sublimation and stitched in Okhla, Delhi: 6 flags take about 9.5 m of 60-inch.

What flags for outdoor poles need

A flag on a building or forecourt pole flies in wind all the time, so the base must let wind through and not tear.

Why knitted polyester for outdoor poles: it is sheer — wind passes through the open knit so the flag tears less; it is polyester, printed by sublimation — sublimated colour holds up in sun.

Trade-off: It meets every need on the list for outdoor poles. The print shows through mirrored on the back; for a design that reads correctly on both sides, two layers are joined.

Buyer tip for outdoor poles: Order spares with the first run so a worn flag can be swapped at once.

Print your own design: send the artwork, the size and the quantity, and we print a sample on knitted polyester before the run. Order the printed fabric only, or ready flags stitched in-house for outdoor poles.

WhatsApp your designOr use the form

Patterned polyester fabric running through one of our digital printers

Flags for outdoor poles on knitted polyester: size and quantity

Recommended size90 x 150 cm or 120 x 180 cm pole flag (cut 98 x 158 cm)
From 3 m of 60-inch fabric (about 148 cm usable)1 flag from 3 m (1 across × 1 down, each cut 98 × 158 cm)
Fabric for 6 flagsAbout 9.5 m of 60-inch knitted polyester, before samples and spares
Fabric weight per pieceAbout 155-178 g per flag at this size (typical 100-115 gsm), before trims and packing
How orders runSmall numbers, replaced on a regular cycle as flags wear
Finishing for outdoor polesDouble-stitched fly edge, pole sleeve or grommets
Care in useTake the flag in during storms; replace when the fly edge frays. Fabric care: cold wash; no bleach

What we check for outdoor poles

  • Sheer: wind passes through the open knit so the flag tears less ✓
  • Poly: sublimated colour holds up in sun ✓

Knitted polyester is the only fabric we shortlist for flags for outdoor poles: it is the one that meets the first need, sheer.

Specification

Printing processSublimation on polyester (two Mimaki printers)
FabricsKnitted flag polyester
Typical fabric weightTypical 100-115 gsm (typical width roll)
Sizes90 x 150 cm or 120 x 180 cm pole flag (cut 98 x 158 cm)
Order asPrinted fabric only, or the ready finished product, stitched and packed in-house
Finishing optionsDouble-stitched fly edge, pole sleeve or grommets
Minimum orderFrom 3 metres of fabric, or a few sample pieces, including finished pieces
TurnaroundSample first; sample and bulk dates are confirmed with your quote
CareCold wash; no bleach
  • Any MOQ — from 3 metres, or a few sample pieces
  • Competitive per-metre pricing — ask for a quote
  • In-house digital printing unit at S-73, Okhla Industrial Area Phase II, New Delhi, since 1996
  • In-house tailoring: printed fabric only, or the ready stitched product

Frequently asked questions

Is knitted polyester a good choice for flags for outdoor poles?

Why knitted polyester for outdoor poles: it is sheer — wind passes through the open knit so the flag tears less; it is polyester, printed by sublimation — sublimated colour holds up in sun. Trade-off: it meets every need on the list for outdoor poles. The print shows through mirrored on the back; for a design that reads correctly on both sides, two layers are joined.

How many flags for outdoor poles come from 3 metres of knitted polyester?

We recommend 90 x 150 cm or 120 x 180 cm pole flag (cut 98 x 158 cm) for outdoor poles. From 3 m of 60-inch fabric (about 148 cm usable): 1 flag from 3 m (1 across × 1 down, each cut 98 × 158 cm). Fabric for 6 flags: about 9.5 m of 60-inch knitted polyester, before samples and spares. Counts are typical; we confirm them with your quote.

Can you deliver ready flags for outdoor poles, or only printed knitted polyester?

Both. Our in-house tailoring finishes them for outdoor poles: double-stitched fly edge, pole sleeve or grommets. Or take the printed knitted polyester only.

How long does an outdoor pole flag last?

It depends on wind and sun. Knitted flag polyester lets wind through, which slows fraying; keep spares to swap when the fly edge wears.

Is there a minimum order quantity (MOQ)?

Any MOQ is fine: we print from as little as 3 metres, and sample pieces too, up to bulk.

What is your price per metre?

Competitive per-metre pricing. Ask for a quote with your fabric, design and quantity and we reply with the price.

Get a quote for knitted polyester flags for outdoor poles

Send your design, the size and the quantity. We reply with the price and a sample plan.

Up to 3 files, 20 MB each — JPG, PNG, TIFF, PDF, PSD, AI, EPS, CDR or ZIP. Bigger files: send them on WhatsApp.
Or WhatsApp us

HM International

Okhla Industrial, S-73, Sanjay Colony II, Pocket Y, Sanjay Colony, Okhla Phase II, Area, New Delhi, Delhi 110020

+91 98181 98500

Monday10 am – 7 pm
Tuesday10 am – 7 pm
Wednesday10 am – 7 pm
Thursday10 am – 7 pm
Friday10 am – 7 pm
Saturday10 am – 7 pm
SundayClosed
WhatsApp us