Mon–Sat 10 am – 7 pm · Okhla Phase II, New Delhi +91 98181 98500 · info@skyfashion.in

Home › Products › Flag printing › Knitted polyester › Knitted polyester flags for sports clubs and fans

Knitted polyester flags for sports clubs and fans

Flags for sports clubs and fans on knitted polyester, printed by sublimation and stitched in Okhla, Delhi: about 6 flags from 3 m of 60-inch.

What flags for sports clubs and fans need

Fan flags are waved by hand, so they must be light, and the crowd sees them from both sides.

Why knitted polyester for sports clubs and fans: it is light — a fan waves it for a whole match; it is sheer — the print shows through so the crowd sees it from both sides.

Trade-off: It meets every need on the list for sports clubs and fans. The print shows through mirrored on the back; for a design that reads correctly on both sides, two layers are joined.

Buyer tip for sports clubs and fans: For a crest that must read correctly from both sides, order two-layer flags.

Print your own design: send the artwork, the size and the quantity, and we print a sample on knitted polyester before the run. Order the printed fabric only, or ready flags stitched in-house for sports clubs and fans.

WhatsApp your designOr use the form

Patterned polyester fabric running through one of our digital printers

Flags for sports clubs and fans on knitted polyester: size and quantity

Recommended size60 x 90 cm hand flag (cut 64 x 98 cm with sleeve)
From 3 m of 60-inch fabric (about 148 cm usable)6 flags from 3 m (2 across × 3 down, each cut 64 × 98 cm)
Fabric for 100 flagsAbout 49.0 m of 60-inch knitted polyester, before samples and spares
Fabric weight per pieceAbout 63-72 g per flag at this size (typical 100-115 gsm), before trims and packing
How orders runOrdered in hundreds before a season or a final, one design
Finishing for sports clubs and fansPole sleeve for a stick, hemmed edges, packed in bundles
Care in useRinse and air dry after a wet match. Fabric care: cold wash; no bleach

What we check for sports clubs and fans

  • Light: a fan waves it for a whole match ✓
  • Sheer: the print shows through so the crowd sees it from both sides ✓

Knitted polyester is the only fabric we shortlist for flags for sports clubs and fans: it is the one that meets the first need, light.

Specification

Printing processSublimation on polyester (two Mimaki printers)
FabricsKnitted flag polyester
Typical fabric weightTypical 100-115 gsm (typical width roll)
Sizes60 x 90 cm hand flag (cut 64 x 98 cm with sleeve)
Order asPrinted fabric only, or the ready finished product, stitched and packed in-house
Finishing optionsPole sleeve for a stick, hemmed edges, packed in bundles
Minimum orderFrom 3 metres of fabric, or a few sample pieces, including finished pieces
TurnaroundSample first; sample and bulk dates are confirmed with your quote
CareCold wash; no bleach
  • Any MOQ — from 3 metres, or a few sample pieces
  • Competitive per-metre pricing — ask for a quote
  • In-house digital printing unit at S-73, Okhla Industrial Area Phase II, New Delhi, since 1996
  • In-house tailoring: printed fabric only, or the ready stitched product

Frequently asked questions

Is knitted polyester a good choice for flags for sports clubs and fans?

Why knitted polyester for sports clubs and fans: it is light — a fan waves it for a whole match; it is sheer — the print shows through so the crowd sees it from both sides. Trade-off: it meets every need on the list for sports clubs and fans. The print shows through mirrored on the back; for a design that reads correctly on both sides, two layers are joined.

How many flags for sports clubs and fans come from 3 metres of knitted polyester?

We recommend 60 x 90 cm hand flag (cut 64 x 98 cm with sleeve) for sports clubs and fans. From 3 m of 60-inch fabric (about 148 cm usable): 6 flags from 3 m (2 across × 3 down, each cut 64 × 98 cm). Fabric for 100 flags: about 49.0 m of 60-inch knitted polyester, before samples and spares. Counts are typical; we confirm them with your quote.

Can you deliver ready flags for sports clubs and fans, or only printed knitted polyester?

Both. Our in-house tailoring finishes them for sports clubs and fans: pole sleeve for a stick, hemmed edges, packed in bundles. Or take the printed knitted polyester only.

Will the club crest read correctly from both sides of a fan flag?

On a single layer the print shows through mirrored on the back. For a crest that reads correctly on both sides, we join two printed layers.

Is there a minimum order quantity (MOQ)?

Any MOQ is fine: we print from as little as 3 metres, and sample pieces too, up to bulk.

What is your price per metre?

Competitive per-metre pricing. Ask for a quote with your fabric, design and quantity and we reply with the price.

Get a quote for knitted polyester flags for sports clubs and fans

Send your design, the size and the quantity. We reply with the price and a sample plan.

Up to 3 files, 20 MB each — JPG, PNG, TIFF, PDF, PSD, AI, EPS, CDR or ZIP. Bigger files: send them on WhatsApp.
Or WhatsApp us

HM International

Okhla Industrial, S-73, Sanjay Colony II, Pocket Y, Sanjay Colony, Okhla Phase II, Area, New Delhi, Delhi 110020

+91 98181 98500

Monday10 am – 7 pm
Tuesday10 am – 7 pm
Wednesday10 am – 7 pm
Thursday10 am – 7 pm
Friday10 am – 7 pm
Saturday10 am – 7 pm
SundayClosed
WhatsApp us