Mon–Sat 10 am – 7 pm · Okhla Phase II, New Delhi +91 98181 98500 · info@skyfashion.in

Home › Products › Suit piece printing › Silk satin

Silk satin suit piece printing

Custom suit pieces on silk satin, printed by reactive dyes in Okhla, Delhi: about 1 suit piece from 3 m of typical 44-inch silk satin. Fabric or ready-made.

Is silk satin right for suit pieces?

Silk satin suits suit pieces: it falls in fluid folds. Printed with reactive dyes: the most luminous colour we print; the sheen deepens dark shades.

Trade-off: Silk costs more and needs gentle care, which is a lot to ask of an everyday suit piece. If that matters, choose cotton cambric for a lower cost per piece.

Design tips: Engineer the yoke, border and dupatta layout so the set matches when stitched. On silk satin, dark grounds, jewel tones and photographic prints glow; very pale designs lose the sheen effect.

Print your own design: send the artwork and the suit piece size, and we print a sample on silk satin before the run. Order the printed fabric only, or ready suit pieces stitched in-house.

WhatsApp your designOr use the form

Printed satin scarf with a glossy finish

Suit pieces on silk satin: size and yield

Typical finished sizeKurta about 2.5 m, dupatta about 2.25 m, bottom about 2.5 m (on 44-inch); engineered panels
On 44-inch fabric (about 108 cm usable)1 suit piece from 3 m (about 2.5 m on 44-inch each)
Fabric for 10 suit piecesAbout 25.0 m of 44-inch fabric, before any extra for samples
Weight of fabric used per pieceAbout 193-265 g per suit piece (16-22 momme ≈ 69-95 gsm), before trims and packing
How it is countedBasis: a kurta top takes about 2.5 m of 44-inch fabric; wider fabric needs proportionally less length.
Finishing optionsCut panels with placed borders and yokes, matched dupatta, packed as sets

Silk satin at a glance

Hand-feel and drapeHeavy, fluid silk with a slippery face
SheenHigh lustre
OpacitySemi-opaque
Typical weight / widthTypical 16-22 momme; typical width 44″
How the print looksReactive: The most luminous colour we print; the sheen deepens dark shades
CareDry clean
Good forLuxury scarves, sarees, pocket squares, ties, scroll invitations
Not ideal forBudget runs, and items washed at home often

How silk satin meets what suit pieces need

Weight: suit pieces work on very light to medium-weight fabricSilk satin is light, typical 16-22 momme (about 69-95 gsm), inside that range.
Opacity: suit pieces can be sheerSilk satin is semi-opaque with room to spare.
Drape: suit pieces handle best in a soft or fluid fabricSilk satin is fluid, a match.

Silk satin comes in a typical 44-inch width, the width the 2.5 m per suit piece is based on; the same suit piece cut from a 58-inch fabric would need about 1.9 m.

Making suit pieces in silk satin

Silk satin is light, so it takes the usual suit piece finish without special handling: cut panels with placed borders and yokes. The high-sheen face of silk satin shifts when cut and shows needle marks, so suit piece panels are best cut in single layers and stitched without unpicking. Silk satin shows creases, so finished suit pieces are pressed before they are folded and packed.

What the print process means here

Suit pieces in silk satin are printed with reactive dyes, because silk satin is silk, a protein fibre; the dye bonds to the fibre, and the fabric is then steamed and washed off, so the hand of the suit piece stays soft with no coating on top. Silk satin is semi-opaque, so the design shows faintly on the back of a suit piece. The high-sheen face deepens dark shades, so dark-ground suit pieces look richest on silk satin. Digital printing has no white ink, so any white in a suit piece design is the colour of the silk satin itself.

Silk satin or silk twill for suit pieces?

Against silk twill, silk satin for suit pieces is high-sheen where silk twill is softly lustrous; and fluid in the hand where silk twill is soft. Pick silk satin for a glossier and more fluid suit piece; pick silk twill for a more matte and firmer one. See silk twill suit pieces.

Other fabrics for suit pieces

Other products in silk satin

Specification

Printing processReactive digital printing (steam fixed, washed off)
FabricsSilk satin / charmeuse
Typical fabric weightTypical 16-22 momme (typical width 44″)
SizesKurta about 2.5 m, dupatta about 2.25 m, bottom about 2.5 m (on 44-inch); engineered panels
Order asPrinted fabric only, or the ready finished product, stitched and packed in-house
Finishing optionsCut panels with placed borders and yokes, matched dupatta, packed as sets
Minimum orderFrom 3 metres of fabric, or a few sample pieces, including finished pieces
TurnaroundSample first; sample and bulk dates are confirmed with your quote
CareDry clean. Suit pieces in silk satin keep their colour longest when dry cleaned and stored folded, out of direct sun.
  • Any MOQ — from 3 metres, or a few sample pieces
  • Competitive per-metre pricing — ask for a quote
  • In-house digital printing unit at S-73, Okhla Industrial Area Phase II, New Delhi, since 1996
  • In-house tailoring: printed fabric only, or the ready stitched product

Frequently asked questions

Is silk satin good for suit pieces?

Silk satin suits suit pieces: it falls in fluid folds. Silk costs more and needs gentle care, which is a lot to ask of an everyday suit piece.

How many suit pieces can I get from 3 metres of silk satin?

On 44-inch fabric (about 108 cm usable): 1 suit piece from 3 m (about 2.5 m on 44-inch each). Fabric for 10 suit pieces: about 25.0 m of 44-inch fabric, before any extra for samples. Weight of fabric used per piece: about 193-265 g per suit piece (16-22 momme ≈ 69-95 gsm), before trims and packing. Sizes and yields are typical; we confirm them with your quote.

Can you deliver ready suit pieces in silk satin, or only the printed fabric?

Both: our in-house tailoring stitches the suit pieces, or you take the printed silk satin only. Silk satin is light, so it takes the usual suit piece finish without special handling: cut panels with placed borders and yokes. The high-sheen face of silk satin shifts when cut and shows needle marks, so suit piece panels are best cut in single layers and stitched without unpicking.

How do I wash a printed silk satin suit piece?

Dry clean. Suit pieces in silk satin keep their colour longest when dry cleaned and stored folded, out of direct sun. Reactive colour is fixed by steaming and washing-off, so it is wash-fast; the fibre decides the care.

What can I use instead of silk satin for suit pieces?

Cotton cambric, for a lower cost per piece. Cotton cambric is light, fine and soft; a little softer than poplin.

How does silk satin compare with silk crepe for suit pieces?

Against silk crepe, silk satin for suit pieces is high-sheen where silk crepe is matte. Pick silk satin for a glossier suit piece; pick silk crepe for a more matte one.

What is the minimum order quantity for silk satin suit pieces?

Any MOQ — from 3 metres, or a few sample pieces. 3 m of silk satin already makes about 1 suit piece, so a sample run can be a small batch.

How is the price of silk satin suit pieces worked out?

Competitive per-metre pricing, quoted for your design and quantity. For suit pieces, silk satin sits in the highest cost band of the bases we print, and ready suit pieces add stitching and finishing to the printed fabric.

Silk satin suit pieces by use

Each page sets the size, quantity, finishing and care for one use.

Get a quote for silk satin suit pieces

Send your design, the size and the quantity. We reply with the price and a sample plan.

Up to 3 files, 20 MB each — JPG, PNG, TIFF, PDF, PSD, AI, EPS, CDR or ZIP. Bigger files: send them on WhatsApp.
Or WhatsApp us

HM International

Okhla Industrial, S-73, Sanjay Colony II, Pocket Y, Sanjay Colony, Okhla Phase II, Area, New Delhi, Delhi 110020

+91 98181 98500

Monday10 am – 7 pm
Tuesday10 am – 7 pm
Wednesday10 am – 7 pm
Thursday10 am – 7 pm
Friday10 am – 7 pm
Saturday10 am – 7 pm
SundayClosed
WhatsApp us