Home › Products › Suit piece printing › Lyocell (Tencel)
Lyocell (Tencel) suit piece printing
Suit pieces on lyocell (Tencel) by reactive dyes, Okhla, Delhi: about 1 suit piece from 3 m of typical 58-inch lyocell (Tencel).
Is lyocell (Tencel) right for suit pieces?
Lyocell (Tencel) suits suit pieces: it falls in fluid folds. Printed with reactive dyes: clean, deep colour.
Trade-off: It costs more than viscose for a similar look. If that matters, choose cotton cambric for a lower cost per piece.
Design tips: Engineer the yoke, border and dupatta layout so the set matches when stitched. On lyocell (Tencel), clean modern prints and deep solids show its smooth surface.
Print your own design: send the artwork and the suit piece size, and we print a sample on lyocell (Tencel) before the run. Order the printed fabric only, or ready suit pieces stitched in-house.

Suit pieces on lyocell (Tencel): size and yield
| Typical finished size | Kurta about 2.5 m, dupatta about 2.25 m, bottom about 2.5 m (on 44-inch); engineered panels |
|---|---|
| On 58-inch fabric (about 143 cm usable) | 1 suit piece from 3 m (about 2.5 m × 108/143 cm ≈ 1.9 m each) |
| Fabric for 10 suit pieces | About 18.9 m of 58-inch fabric, before any extra for samples |
| Weight of fabric used per piece | About 306-417 g per suit piece, before trims and packing |
| How it is counted | Basis: a kurta top takes about 2.5 m of 44-inch fabric; wider fabric needs proportionally less length. |
| Finishing options | Cut panels with placed borders and yokes, matched dupatta, packed as sets |
Lyocell (Tencel) at a glance
| Hand-feel and drape | Smooth, cool and fluid; stronger than viscose when wet |
|---|---|
| Sheen | Soft lustre |
| Opacity | Opaque |
| Typical weight / width | Typical 110-150 gsm; typical width 58″ |
| How the print looks | Reactive: Clean, deep colour |
| Care | Gentle machine wash cold |
| Good for | Shirts, kurtis, bedsheets, nightwear |
| Not ideal for | Lowest-cost runs (it costs more than viscose) |
How lyocell (Tencel) meets what suit pieces need
| Weight: suit pieces work on very light to medium-weight fabric | Lyocell (Tencel) is medium-weight, typical 110-150 gsm, at the heavy end of that range. |
|---|---|
| Opacity: suit pieces can be sheer | Lyocell (Tencel) is opaque with room to spare. |
| Drape: suit pieces handle best in a soft or fluid fabric | Lyocell (Tencel) is fluid, a match. |
Lyocell (Tencel) comes in a typical 58-inch width, so a suit piece takes about 1.9 m instead of 2.5 m on 44-inch, about 24% less length.
Making suit pieces in lyocell (Tencel)
Lyocell (Tencel) is medium-weight, so it takes the usual suit piece finish without special handling: cut panels with placed borders and yokes. Lyocell (Tencel) can shrink a little in its first wash, so stitched suit pieces in it should be sized with that in mind.
What the print process means here
Suit pieces in lyocell (Tencel) are printed with reactive dyes, because lyocell (Tencel) is a regenerated cellulose fibre; the dye bonds to the fibre, and the fabric is then steamed and washed off, so the hand of the suit piece stays soft with no coating on top. Lyocell (Tencel) is opaque, so the reverse of a suit piece stays much paler than the printed face. Digital printing has no white ink, so any white in a suit piece design is the colour of the lyocell (Tencel) itself.
Lyocell (Tencel) or cotton satin for suit pieces?
Against cotton satin, lyocell (Tencel) for suit pieces is fluid in the hand where cotton satin is soft; a gentle-wash fibre (weaker when wet) where cotton satin is machine-washable; and higher in cost. Pick lyocell (Tencel) for a more fluid suit piece; pick cotton satin for a firmer and easier-care one. See cotton satin suit pieces.
Other fabrics for suit pieces
- Cotton satin suit piece printing: firmer and easier-care than lyocell (Tencel), about 1 from 3 m
- Modal suit piece printing: lighter and sheerer than lyocell (Tencel), about 1 from 3 m
- Cotton slub suit piece printing: more matte and firmer than lyocell (Tencel), about 1 from 3 m
- Viscose rayon suit piece printing: lighter and sheerer than lyocell (Tencel), about 1 from 3 m
Other products in lyocell (Tencel)
- Lyocell (Tencel) kurti printing: about 1 kurti from the 3 m that makes 1 suit piece
- Lyocell (Tencel) kaftan printing: about 1 kaftan from the 3 m that makes 1 suit piece
- Lyocell (Tencel) kids’ outfit printing: about 3 kids’ outfits from the 3 m that makes 1 suit piece
- Lyocell (Tencel) nightwear set printing: about 1 nightwear set from the 3 m that makes 1 suit piece
Specification
| Printing process | Reactive digital printing (steam fixed, washed off) |
|---|---|
| Fabrics | Lyocell / Tencel |
| Typical fabric weight | Typical 110-150 gsm (typical width 58″) |
| Sizes | Kurta about 2.5 m, dupatta about 2.25 m, bottom about 2.5 m (on 44-inch); engineered panels |
| Order as | Printed fabric only, or the ready finished product, stitched and packed in-house |
| Finishing options | Cut panels with placed borders and yokes, matched dupatta, packed as sets |
| Minimum order | From 3 metres of fabric, or a few sample pieces, including finished pieces |
| Turnaround | Sample first; sample and bulk dates are confirmed with your quote |
| Care | Gentle machine wash cold. Suit pieces in lyocell (Tencel) last longest with a cold, gentle wash and drying in shade; do not wring them. |
- Any MOQ — from 3 metres, or a few sample pieces
- Competitive per-metre pricing — ask for a quote
- In-house digital printing unit at S-73, Okhla Industrial Area Phase II, New Delhi, since 1996
- In-house tailoring: printed fabric only, or the ready stitched product
Frequently asked questions
Is lyocell (Tencel) good for suit pieces?
Lyocell (Tencel) suits suit pieces: it falls in fluid folds. It costs more than viscose for a similar look.
How many suit pieces can I get from 3 metres of lyocell (Tencel)?
On 58-inch fabric (about 143 cm usable): 1 suit piece from 3 m (about 2.5 m × 108/143 cm ≈ 1.9 m each). Fabric for 10 suit pieces: about 18.9 m of 58-inch fabric, before any extra for samples. Weight of fabric used per piece: about 306-417 g per suit piece, before trims and packing. Sizes and yields are typical; we confirm them with your quote.
Can you deliver ready suit pieces in lyocell (Tencel), or only the printed fabric?
Both: our in-house tailoring stitches the suit pieces, or you take the printed lyocell (Tencel) only. Lyocell (Tencel) is medium-weight, so it takes the usual suit piece finish without special handling: cut panels with placed borders and yokes. Lyocell (Tencel) can shrink a little in its first wash, so stitched suit pieces in it should be sized with that in mind.
How do I wash a printed lyocell (Tencel) suit piece?
Gentle machine wash cold. Suit pieces in lyocell (Tencel) last longest with a cold, gentle wash and drying in shade; do not wring them. Reactive colour is fixed by steaming and washing-off, so it is wash-fast; the fibre decides the care.
What can I use instead of lyocell (Tencel) for suit pieces?
Cotton cambric, for a lower cost per piece. Cotton cambric is light, fine and soft; a little softer than poplin.
How does lyocell (Tencel) compare with modal for suit pieces?
Against modal, lyocell (Tencel) for suit pieces is heavier (typical 110-150 gsm against 100-130 gsm); and opaque where modal is semi-opaque. Pick lyocell (Tencel) for a heavier and more opaque suit piece; pick modal for a lighter and sheerer one.
What is the minimum order quantity for lyocell (Tencel) suit pieces?
Any MOQ — from 3 metres, or a few sample pieces. 3 m of lyocell (Tencel) already makes about 1 suit piece, so a sample run can be a small batch.
How is the price of lyocell (Tencel) suit pieces worked out?
Competitive per-metre pricing, quoted for your design and quantity. For suit pieces, lyocell (Tencel) sits in the upper-middle cost band of the bases we print, and ready suit pieces add stitching and finishing to the printed fabric.
Questions about suit piece and lyocell (Tencel)
Get a quote for lyocell (Tencel) suit pieces
Send your design, the size and the quantity. We reply with the price and a sample plan.
HM International
Okhla Industrial, S-73, Sanjay Colony II, Pocket Y, Sanjay Colony, Okhla Phase II, Area, New Delhi, Delhi 110020
| Monday | 10 am – 7 pm |
| Tuesday | 10 am – 7 pm |
| Wednesday | 10 am – 7 pm |
| Thursday | 10 am – 7 pm |
| Friday | 10 am – 7 pm |
| Saturday | 10 am – 7 pm |
| Sunday | Closed |