Mon–Sat 10 am – 7 pm · Okhla Phase II, New Delhi +91 98181 98500 · info@skyfashion.in

Home › Guides › What is pre-treatment?

What is pre-treatment in digital fabric printing?

Pre-treatment is a coating applied to fabric before direct digital printing. For reactive printing it usually holds a thickener and alkali, so the ink stays sharp and can bond when steamed. Sublimation transfer does not need one on the fabric itself, since the dye moves from paper, and that is why the routes differ.

Floral design printing directly onto fabric on our belt printer

Why is pre-treatment needed for reactive printing?

Pre-treatment is needed for reactive printing because the ink itself is thin and holds no alkali. The thickener stops the drop spreading along the yarn and the alkali lets the dye bond with the fibre during steaming.

How does preparation differ by process?

For pre-treatment, the table below gives the figures. General process comparison.

ProcessPrepared fabric?What the preparation does
ReactiveYes: thickener and alkaliKeeps the edge sharp and lets the dye bond
Sublimation transferNo: dye comes from printed paperPaper carries the ink; heat moves it
PigmentDepends on the systemBinder holds the colour on the surface

What goes wrong with poor pre-treatment?

Poor pre-treatment shows as blurred edges, weak colour and uneven patches, since ink spreads and fixes unevenly. Silk and other sensitive fibres need a gentler recipe than cotton, because strong alkali harms them.

Can any fabric be printed without pre-treatment?

Fabric printed by sublimation transfer needs no pre-treatment of this kind, and many pigment inks carry their own binder. Reactive printing on untreated fabric gives poor, unfixed colour.

Further reading

Frequently asked questions

Is pre-treatment washed out?

Yes, in reactive printing it leaves the cloth in washing-off, so it should not affect the finished hand.

Can I buy ready-prepared fabric?

Yes, prepared-for-printing fabric exists, though it still needs the right recipe for the ink.

Does pre-treatment change the colour of the cloth?

It can slightly, and shelf time can matter, which is why fabric should be printed soon after treatment.

Do you pre-treat for reactive printing at HM International?

Our reactive process starts with the fabric padded with a thickener and alkali so the dye can bond.

Is there a minimum order quantity (MOQ)?

Any MOQ is fine: we print from as little as 3 metres, and sample pieces too, up to bulk.

What is your price per metre?

Competitive per-metre pricing. Ask for a quote with your fabric, design and quantity and we reply with the price.

Get a quote

Send your design, fabric and quantity. We reply with the price and a sample plan.

Up to 3 files, 20 MB each — JPG, PNG, TIFF, PDF, PSD, AI, EPS, CDR or ZIP. Bigger files: send them on WhatsApp.
Or WhatsApp us

HM International

Okhla Industrial, S-73, Sanjay Colony II, Pocket Y, Sanjay Colony, Okhla Phase II, Area, New Delhi, Delhi 110020

+91 98181 98500

Monday10 am – 7 pm
Tuesday10 am – 7 pm
Wednesday10 am – 7 pm
Thursday10 am – 7 pm
Friday10 am – 7 pm
Saturday10 am – 7 pm
SundayClosed
WhatsApp us