Mon–Sat 10 am – 7 pm · Okhla Phase II, New Delhi +91 98181 98500 · info@skyfashion.in

Home › Guides › What is a bias cut?

What is a bias cut, and why are ties cut that way?

A bias cut runs at 45 degrees to the warp and weft, where a woven fabric has the most give. Ties are cut this way so they curve round the neck, tie cleanly and return to shape. The cost is length: a long bias strip needs more fabric, so ties are usually pieced from shorter bias sections.

Geometric print on silk

Why does a bias cut stretch more?

A bias cut stretches because pulling on the diagonal shifts the square grid of the weave into a diamond shape, rather than pulling directly along the yarns. The fabric then gently recovers.

How long a 45-degree strip does a fabric give?

For bias cut, the table below gives the figures. Computed: strip length = usable width × √2 when the length of fabric equals the width. Ties are usually joined from sections.

WidthUsableLongest 45° strip in 1 mLongest 45° strip in a full squareLength of square needed
44-inch108 cm141 cm153 cm1.08 m
54-inch133 cm141 cm188 cm1.33 m
58-inch143 cm141 cm202 cm1.43 m

How does a bias cut change print layout?

A bias cut turns the print by 45 degrees on the finished piece, so stripes run diagonally and a small repeat looks different than on the flat. Plan the artwork for that turn, or the design runs the wrong way.

Where else is a bias cut used?

Besides ties, a bias cut is used for piping, binding strips and slip dresses that need to follow the body. Each piece needs careful handling, since a bias edge can stretch out of shape on the machine.

Further reading

Frequently asked questions

How much fabric does a tie need?

About 0.33 m of 44-inch fabric per tie, on our basis, because the tie is pieced from sections.

Does a bias cut waste fabric?

It leaves more awkward triangles, so careful laying out is part of the cost.

Why not cut ties straight?

A straight-cut tie twists and does not form a good knot or a neat fall.

Which fabrics suit bias ties?

Silk twill, silk satin and polyester satin are the usual choices for ties.

Is there a minimum order quantity (MOQ)?

Any MOQ is fine: we print from as little as 3 metres, and sample pieces too, up to bulk.

What is your price per metre?

Competitive per-metre pricing. Ask for a quote with your fabric, design and quantity and we reply with the price.

Get a quote

Send your design, fabric and quantity. We reply with the price and a sample plan.

Up to 3 files, 20 MB each — JPG, PNG, TIFF, PDF, PSD, AI, EPS, CDR or ZIP. Bigger files: send them on WhatsApp.
Or WhatsApp us

HM International

Okhla Industrial, S-73, Sanjay Colony II, Pocket Y, Sanjay Colony, Okhla Phase II, Area, New Delhi, Delhi 110020

+91 98181 98500

Monday10 am – 7 pm
Tuesday10 am – 7 pm
Wednesday10 am – 7 pm
Thursday10 am – 7 pm
Friday10 am – 7 pm
Saturday10 am – 7 pm
SundayClosed
WhatsApp us