
How is a custom bandana printed digitally?
A custom bandana is laid out on the fabric as a run of 57 cm squares. Cotton goes through pre-treatment, printing, steaming and washing, while polyester takes the heat route. Then the squares are cut and hemmed.
How many bandanas come from 3 m of each fabric?
For printing a bandana, the table below sets it out. Based on squares cut at 57 cm, at the widest typical width. Weights are typical.
| Fabric | Process | Typical weight | From 3 m |
|---|---|---|---|
| Cotton cambric | Reactive | 80-100 gsm | 10 |
| Cotton poplin | Reactive | 100-130 gsm | 10 |
| Cotton muslin | Reactive | 60-90 gsm | 5 |
| Cotton voile | Reactive | 60-80 gsm | 10 |
| Peach-finish polyester | Sublimation | 80-120 gsm | 10 |
Which bandana hem is most common?
A bandana usually has a narrow machine hem or an overlocked edge. Tell us which you want, since a heavy hem shows at the fold, while a fine one keeps the print close to the edge.
How is the back of a bandana different?
The back of a printed bandana is often slightly paler than the face, depending on the weight of cotton. A thin muslin shows the design strongly on both sides, and that is why it is popular.