
What pixel size should artwork for table flags be?
Artwork for table flags should be made at the 18 × 27 cm cut size, not the 15 × 22.5 cm finished size. 300 DPI is a sensible general target for table flags because they are small and looked at closely. This is general guidance, not a specification of any machine.
| Resolution (general guidance) | Pixels for a 18 × 27 cm cut panel | Uncompressed RGB file size |
|---|---|---|
| 100 DPI | 709 × 1,063 px | 2 MB |
| 150 DPI | 1,063 × 1,594 px | 5 MB |
| 300 DPI | 2,126 × 3,189 px | 20 MB |
Should artwork for table flags be a placement or a repeat?
For table flags: a desk flag is only about 15 cm wide, so a logo must be simple: fine detail and small text disappear. It usually stands with others, so a consistent layout across a set helps. If two layers are joined, each side has its own file.
How much hem or seam allowance does artwork for table flags need?
A 15 × 22.5 cm finished table flag is cut at 18 × 27 cm, which is 1.5 cm per side across the width and 2.25 cm per side along the length.
Which fabrics change how artwork for table flags looks?
For table flags, no listed base badly breaks up line work, while polyester satin show fine detail and deep colour well.