Mon–Sat 10 am – 7 pm · Okhla Phase II, New Delhi +91 98181 98500 · info@skyfashion.in

Home › Products › Tablecloth & runner printing › Cotton cambric

Cotton cambric table runner printing

Table runners on cotton cambric by reactive dyes, Okhla, Delhi: about 3 table runners from 3 m of typical 58-inch cotton cambric.

Is cotton cambric right for table runners?

Cotton cambric suits table runners: it is soft and easy to handle, its matte face shows the design without glare and it takes repeated washing. Printed with reactive dyes: soft hand with crisp small florals and fine lines.

Trade-off: It is at the light end for table runners, so choose a heavier base for hard daily use. If that matters, choose cotton slub for a heavier, harder-wearing piece.

Design tips: Put the main design at the runner ends, where it hangs over the table edge. On cotton cambric, small florals and fine line work look crisp; keep very pale grounds for lined pieces.

Print your own design: send the artwork and the table runner size, and we print a sample on cotton cambric before the run. Order the printed fabric only, or ready table runners stitched in-house.

WhatsApp your designOr use the form

Floral print sample on fabric

Table runners on cotton cambric: size and yield

Typical finished sizeRunners about 33 x 180 cm (cut 36 x 186 cm); tablecloths to your table size
On 44-inch fabric (about 108 cm usable)3 table runners from 3 m (3 across × 1 down = 3 pieces of 36 × 186 cm)
On 58-inch fabric (about 143 cm usable)3 table runners from 3 m (3 across × 1 down = 3 pieces of 36 × 186 cm)
Fabric for 10 table runnersAbout 7.4 m of 58-inch fabric, before any extra for samples
Weight of fabric used per pieceAbout 54-67 g per table runner, before trims and packing
How it is countedPieces are counted on the usable width (fabric width less about 4 cm of selvedge) across a 3 m length, trying both directions.
Finishing optionsDouble-fold hems, mitred corners, lined runners, tassels on runner ends, packed

Cotton cambric at a glance

Hand-feel and drapeLight, fine and soft; a little softer than poplin
SheenMatte
OpacitySemi-opaque; pale garments may need a lining
Typical weight / widthTypical 80-100 gsm; typical width 44-58″
How the print looksReactive: Soft hand with crisp small florals and fine lines
CareMachine wash cool on a gentle cycle
Good forKurtis, kidswear, nightwear, pocket squares, handkerchiefs
Not ideal forBags and upholstery (too light)

How cotton cambric meets what table runners need

Weight: table runners work on light to very heavy fabricCotton cambric is light, typical 80-100 gsm, at the light end of that range.
Opacity: table runners need at least a semi-opaque fabricCotton cambric is semi-opaque.
Drape: table runners handle best in a crisp or soft fabricCotton cambric is soft, a match.
Sheen: on table runners, a matte face avoids glareCotton cambric is matte, which helps here.
Washing: table runners are laundered hard and oftenCotton cambric is machine-washable.

On 58-inch cotton cambric, 3 cut pieces of 36 cm sit across the 143 cm usable width, leaving about 35 cm (24% of the width) as offcut on every row.

Making table runners in cotton cambric

Cotton cambric is light, so it takes the usual table runner finish without special handling: double-fold hems.

What the print process means here

Table runners in cotton cambric are printed with reactive dyes, because cotton cambric is cotton, a cellulose fibre; the dye bonds to the fibre, and the fabric is then steamed and washed off, which is why the colour holds through the frequent washing table runners get. Cotton cambric is semi-opaque, so the design shows faintly on the back of a table runner. Digital printing has no white ink, so any white in a table runner design is the colour of the cotton cambric itself.

Cotton cambric or cotton poplin for table runners?

Against cotton poplin, cotton cambric for table runners is semi-opaque where cotton poplin is opaque; and soft in the hand where cotton poplin is crisp. Pick cotton cambric for a sheerer and softer table runner; pick cotton poplin for a more opaque and crisper one. See cotton poplin table runners.

Other fabrics for table runners

Other products in cotton cambric

Specification

Printing processReactive digital printing (steam fixed, washed off)
FabricsCotton cambric
Typical fabric weightTypical 80-100 gsm (typical width 44-58″)
SizesRunners about 33 x 180 cm (cut 36 x 186 cm); tablecloths to your table size
Order asPrinted fabric only, or the ready finished product, stitched and packed in-house
Finishing optionsDouble-fold hems, mitred corners, lined runners, tassels on runner ends, packed
Minimum orderFrom 3 metres of fabric, or a few sample pieces, including finished pieces
TurnaroundSample first; sample and bulk dates are confirmed with your quote
CareMachine wash cool on a gentle cycle. Table runners are laundered often, and cotton cambric takes regular machine washing better than silk or viscose would.
  • Any MOQ — from 3 metres, or a few sample pieces
  • Competitive per-metre pricing — ask for a quote
  • In-house digital printing unit at S-73, Okhla Industrial Area Phase II, New Delhi, since 1996
  • In-house tailoring: printed fabric only, or the ready stitched product

Frequently asked questions

Is cotton cambric good for table runners?

Cotton cambric suits table runners: it is soft and easy to handle, its matte face shows the design without glare and it takes repeated washing. It is at the light end for table runners, so choose a heavier base for hard daily use.

How many table runners can I get from 3 metres of cotton cambric?

On 44-inch fabric (about 108 cm usable): 3 table runners from 3 m (3 across × 1 down = 3 pieces of 36 × 186 cm). On 58-inch fabric (about 143 cm usable): 3 table runners from 3 m (3 across × 1 down = 3 pieces of 36 × 186 cm). Fabric for 10 table runners: about 7.4 m of 58-inch fabric, before any extra for samples. Weight of fabric used per piece: about 54-67 g per table runner, before trims and packing. Sizes and yields are typical; we confirm them with your quote.

Can you deliver ready table runners in cotton cambric, or only the printed fabric?

Both: our in-house tailoring stitches the table runners, or you take the printed cotton cambric only. Cotton cambric is light, so it takes the usual table runner finish without special handling: double-fold hems.

How do I wash a printed cotton cambric table runner?

Machine wash cool on a gentle cycle. Table runners are laundered often, and cotton cambric takes regular machine washing better than silk or viscose would. Reactive colour is fixed by steaming and washing-off, so it is wash-fast; the fibre decides the care.

What can I use instead of cotton cambric for table runners?

Cotton slub, for a heavier, harder-wearing piece. Cotton slub is medium weight with a textured, uneven yarn.

What is the minimum order quantity for cotton cambric table runners?

Any MOQ — from 3 metres, or a few sample pieces. 3 m of cotton cambric already makes about 3 table runners, so a sample run can be a small batch.

How is the price of cotton cambric table runners worked out?

Competitive per-metre pricing, quoted for your design and quantity. For table runners, cotton cambric sits in the lower-middle cost band of the bases we print, and ready table runners add stitching and finishing to the printed fabric.

Get a quote for cotton cambric table runners

Send your design, the size and the quantity. We reply with the price and a sample plan.

Up to 3 files, 20 MB each — JPG, PNG, TIFF, PDF, PSD, AI, EPS, CDR or ZIP. Bigger files: send them on WhatsApp.
Or WhatsApp us

HM International

Okhla Industrial, S-73, Sanjay Colony II, Pocket Y, Sanjay Colony, Okhla Phase II, Area, New Delhi, Delhi 110020

+91 98181 98500

Monday10 am – 7 pm
Tuesday10 am – 7 pm
Wednesday10 am – 7 pm
Thursday10 am – 7 pm
Friday10 am – 7 pm
Saturday10 am – 7 pm
SundayClosed
WhatsApp us