Home › Products › Suit piece printing › Silk crepe
Silk crepe suit piece printing
Custom suit pieces on silk crepe, printed by reactive dyes in Okhla, Delhi: about 1 suit piece from 3 m of typical 44-inch silk crepe. Fabric or ready-made.
Is silk crepe right for suit pieces?
Silk crepe suits suit pieces: it is one of the usual first choices for this job and it falls in fluid folds. Printed with reactive dyes: soft, rich colour without glare.
Trade-off: Silk costs more and needs gentle care, which is a lot to ask of an everyday suit piece. If that matters, choose cotton cambric for a lower cost per piece.
Design tips: Engineer the yoke, border and dupatta layout so the set matches when stitched. On silk crepe, painterly prints and soft gradients look rich without glare.
Print your own design: send the artwork and the suit piece size, and we print a sample on silk crepe before the run. Order the printed fabric only, or ready suit pieces stitched in-house.

Suit pieces on silk crepe: size and yield
| Typical finished size | Kurta about 2.5 m, dupatta about 2.25 m, bottom about 2.5 m (on 44-inch); engineered panels |
|---|---|
| On 44-inch fabric (about 108 cm usable) | 1 suit piece from 3 m (about 2.5 m on 44-inch each) |
| Fabric for 10 suit pieces | About 25.0 m of 44-inch fabric, before any extra for samples |
| Weight of fabric used per piece | About 145-193 g per suit piece (12-16 momme ≈ 52-69 gsm), before trims and packing |
| How it is counted | Basis: a kurta top takes about 2.5 m of 44-inch fabric; wider fabric needs proportionally less length. |
| Finishing options | Cut panels with placed borders and yokes, matched dupatta, packed as sets |
Silk crepe at a glance
| Hand-feel and drape | Light, fluid silk with a fine pebbly feel |
|---|---|
| Sheen | Low lustre |
| Opacity | Semi-opaque |
| Typical weight / width | Typical 12-16 momme; typical width 44″ |
| How the print looks | Reactive: Soft, rich colour without glare |
| Care | Dry clean, or hand wash cold |
| Good for | Scarves, sarees, kaftans, blouses, furoshiki |
| Not ideal for | Crisp shapes |
How silk crepe meets what suit pieces need
| Weight: suit pieces work on very light to medium-weight fabric | Silk crepe is light, typical 12-16 momme (about 52-69 gsm), inside that range. |
|---|---|
| Opacity: suit pieces can be sheer | Silk crepe is semi-opaque with room to spare. |
| Drape: suit pieces handle best in a soft or fluid fabric | Silk crepe is fluid, a match. |
Silk crepe comes in a typical 44-inch width, the width the 2.5 m per suit piece is based on; the same suit piece cut from a 58-inch fabric would need about 1.9 m.
Making suit pieces in silk crepe
Silk crepe is light, so it takes the usual suit piece finish without special handling: cut panels with placed borders and yokes.
What the print process means here
Suit pieces in silk crepe are printed with reactive dyes, because silk crepe is silk, a protein fibre; the dye bonds to the fibre, and the fabric is then steamed and washed off, so the hand of the suit piece stays soft with no coating on top. Silk crepe is semi-opaque, so the design shows faintly on the back of a suit piece. Digital printing has no white ink, so any white in a suit piece design is the colour of the silk crepe itself.
Silk crepe or silk twill for suit pieces?
Against silk twill, silk crepe for suit pieces is matte where silk twill is softly lustrous; and fluid in the hand where silk twill is soft. Pick silk crepe for a more matte and more fluid suit piece; pick silk twill for a glossier and firmer one. See silk twill suit pieces.
Other fabrics for suit pieces
- Silk twill suit piece printing: glossier and firmer than silk crepe, about 1 from 3 m
- Silk tabby suit piece printing: lighter and firmer than silk crepe, about 1 from 3 m
- Silk satin suit piece printing: glossier than silk crepe, about 1 from 3 m
- Rayon crepe suit piece printing: easier-care and lower-cost than silk crepe, about 1 from 3 m
Other products in silk crepe
- Silk crepe dupatta printing: about 1 dupatta from the 3 m that makes 1 suit piece
- Silk crepe kurti printing: about 1 kurti from the 3 m that makes 1 suit piece
- Silk crepe kaftan printing: about 1 kaftan from the 3 m that makes 1 suit piece
- Silk crepe furoshiki printing: about 4 furoshiki cloths from the 3 m that makes 1 suit piece
Specification
| Printing process | Reactive digital printing (steam fixed, washed off) |
|---|---|
| Fabrics | Silk crepe de chine |
| Typical fabric weight | Typical 12-16 momme (typical width 44″) |
| Sizes | Kurta about 2.5 m, dupatta about 2.25 m, bottom about 2.5 m (on 44-inch); engineered panels |
| Order as | Printed fabric only, or the ready finished product, stitched and packed in-house |
| Finishing options | Cut panels with placed borders and yokes, matched dupatta, packed as sets |
| Minimum order | From 3 metres of fabric, or a few sample pieces, including finished pieces |
| Turnaround | Sample first; sample and bulk dates are confirmed with your quote |
| Care | Dry clean, or hand wash cold. Suit pieces in silk crepe keep their colour longest when dry cleaned and stored folded, out of direct sun. |
- Any MOQ — from 3 metres, or a few sample pieces
- Competitive per-metre pricing — ask for a quote
- In-house digital printing unit at S-73, Okhla Industrial Area Phase II, New Delhi, since 1996
- In-house tailoring: printed fabric only, or the ready stitched product
Frequently asked questions
Is silk crepe good for suit pieces?
Silk crepe suits suit pieces: it is one of the usual first choices for this job and it falls in fluid folds. Silk costs more and needs gentle care, which is a lot to ask of an everyday suit piece.
How many suit pieces can I get from 3 metres of silk crepe?
On 44-inch fabric (about 108 cm usable): 1 suit piece from 3 m (about 2.5 m on 44-inch each). Fabric for 10 suit pieces: about 25.0 m of 44-inch fabric, before any extra for samples. Weight of fabric used per piece: about 145-193 g per suit piece (12-16 momme ≈ 52-69 gsm), before trims and packing. Sizes and yields are typical; we confirm them with your quote.
Can you deliver ready suit pieces in silk crepe, or only the printed fabric?
Both: our in-house tailoring stitches the suit pieces, or you take the printed silk crepe only. Silk crepe is light, so it takes the usual suit piece finish without special handling: cut panels with placed borders and yokes.
How do I wash a printed silk crepe suit piece?
Dry clean, or hand wash cold. Suit pieces in silk crepe keep their colour longest when dry cleaned and stored folded, out of direct sun. Reactive colour is fixed by steaming and washing-off, so it is wash-fast; the fibre decides the care.
What can I use instead of silk crepe for suit pieces?
Cotton cambric, for a lower cost per piece. Cotton cambric is light, fine and soft; a little softer than poplin.
How does silk crepe compare with silk tabby for suit pieces?
Against silk tabby, silk crepe for suit pieces is heavier (typical 12-16 momme against light plain weave); and fluid in the hand where silk tabby is soft. Pick silk crepe for a heavier and more fluid suit piece; pick silk tabby for a lighter and firmer one.
What is the minimum order quantity for silk crepe suit pieces?
Any MOQ — from 3 metres, or a few sample pieces. 3 m of silk crepe already makes about 1 suit piece, so a sample run can be a small batch.
How is the price of silk crepe suit pieces worked out?
Competitive per-metre pricing, quoted for your design and quantity. For suit pieces, silk crepe sits in the highest cost band of the bases we print, and ready suit pieces add stitching and finishing to the printed fabric.
Questions about suit piece and silk crepe
Get a quote for silk crepe suit pieces
Send your design, the size and the quantity. We reply with the price and a sample plan.
HM International
Okhla Industrial, S-73, Sanjay Colony II, Pocket Y, Sanjay Colony, Okhla Phase II, Area, New Delhi, Delhi 110020
| Monday | 10 am – 7 pm |
| Tuesday | 10 am – 7 pm |
| Wednesday | 10 am – 7 pm |
| Thursday | 10 am – 7 pm |
| Friday | 10 am – 7 pm |
| Saturday | 10 am – 7 pm |
| Sunday | Closed |