Mon–Sat 10 am – 7 pm · Okhla Phase II, New Delhi +91 98181 98500 · info@skyfashion.in

Home › Products › Printed lining fabric › Silk twill

Silk twill jacket lining printing

Custom jacket linings on silk twill, printed by reactive dyes in Okhla, Delhi: about 2 jacket linings from 3 m of typical 44-inch silk twill. Fabric or ready-made.

Is silk twill right for jacket linings?

Silk twill suits jacket linings: it is one of the usual first choices for this job and its sheen makes printed colours look richer. Printed with reactive dyes: very sharp detail and rich colour.

Trade-off: Silk costs more and needs gentle care, which is a lot to ask of an everyday jacket lining. If that matters, choose polyester satin for a lower cost per piece.

Design tips: A lining is seen only when the jacket opens, so a bold surprise print works well. On silk twill, fine geometrics, foulards and small repeats print with very sharp edges.

Print your own design: send the artwork and the jacket lining size, and we print a sample on silk twill before the run. Order the printed fabric only, or ready jacket linings stitched in-house.

WhatsApp your designOr use the form

Geometric print on silk

Jacket linings on silk twill: size and yield

Typical finished sizeAbout 1.5 m per jacket lining on 44-inch
On 44-inch fabric (about 108 cm usable)2 jacket linings from 3 m (about 1.5 m on 44-inch each)
Fabric for 10 jacket liningsAbout 15.0 m of 44-inch fabric, before any extra for samples
Weight of fabric used per pieceAbout 87-116 g per jacket lining (12-16 momme ≈ 52-69 gsm), before trims and packing
How it is countedBasis: a jacket lining takes about 1.5 m of 44-inch fabric; wider fabric needs proportionally less length.
Finishing optionsFabric by the metre, or cut lining panels for your pattern

Silk twill at a glance

Hand-feel and drapeSmooth, with a fine diagonal; holds a knot and a fold well
SheenSoft lustre
OpacitySemi-opaque
Typical weight / widthTypical 12-16 momme; typical width 44″
How the print looksReactive: Very sharp detail and rich colour
CareDry clean
Good forTies, pocket squares, square scarves
Not ideal forEveryday washable items

How silk twill meets what jacket linings need

Weight: jacket linings work on very light to light fabricSilk twill is light, typical 12-16 momme (about 52-69 gsm), at the heavy end of that range.
Opacity: jacket linings can be sheerSilk twill is semi-opaque with room to spare.
Sheen: on jacket linings, sheen lifts the colourSilk twill is softly lustrous, which helps here.

Silk twill comes in a typical 44-inch width, the width the 1.5 m per jacket lining is based on; the same jacket lining cut from a 58-inch fabric would need about 1.1 m.

Making jacket linings in silk twill

Silk twill is light, so it takes the usual jacket lining finish without special handling: fabric by the metre.

What the print process means here

Jacket linings in silk twill are printed with reactive dyes, because silk twill is silk, a protein fibre; the dye bonds to the fibre, and the fabric is then steamed and washed off, so the hand of the jacket lining stays soft with no coating on top. Silk twill is semi-opaque, so the design shows faintly on the back of a jacket lining. Digital printing has no white ink, so any white in a jacket lining design is the colour of the silk twill itself.

Silk twill or silk satin for jacket linings?

Against silk satin, silk twill for jacket linings is softly lustrous where silk satin is high-sheen; and soft in the hand where silk satin is fluid. Pick silk twill for a more matte and firmer jacket lining; pick silk satin for a glossier and more fluid one. See silk satin jacket linings.

Other fabrics for jacket linings

Other products in silk twill

Specification

Printing processReactive digital printing (steam fixed, washed off)
FabricsSilk twill
Typical fabric weightTypical 12-16 momme (typical width 44″)
SizesAbout 1.5 m per jacket lining on 44-inch
Order asPrinted fabric only, or the ready finished product, stitched and packed in-house
Finishing optionsFabric by the metre, or cut lining panels for your pattern
Minimum orderFrom 3 metres of fabric, or a few sample pieces, including finished pieces
TurnaroundSample first; sample and bulk dates are confirmed with your quote
CareDry clean. Jacket linings in silk twill keep their colour longest when dry cleaned and stored folded, out of direct sun.
  • Any MOQ — from 3 metres, or a few sample pieces
  • Competitive per-metre pricing — ask for a quote
  • In-house digital printing unit at S-73, Okhla Industrial Area Phase II, New Delhi, since 1996
  • In-house tailoring: printed fabric only, or the ready stitched product

Frequently asked questions

Is silk twill good for jacket linings?

Silk twill suits jacket linings: it is one of the usual first choices for this job and its sheen makes printed colours look richer. Silk costs more and needs gentle care, which is a lot to ask of an everyday jacket lining.

How many jacket linings can I get from 3 metres of silk twill?

On 44-inch fabric (about 108 cm usable): 2 jacket linings from 3 m (about 1.5 m on 44-inch each). Fabric for 10 jacket linings: about 15.0 m of 44-inch fabric, before any extra for samples. Weight of fabric used per piece: about 87-116 g per jacket lining (12-16 momme ≈ 52-69 gsm), before trims and packing. Sizes and yields are typical; we confirm them with your quote.

Can you deliver ready jacket linings in silk twill, or only the printed fabric?

Both: our in-house tailoring stitches the jacket linings, or you take the printed silk twill only. Silk twill is light, so it takes the usual jacket lining finish without special handling: fabric by the metre.

How do I wash a printed silk twill jacket lining?

Dry clean. Jacket linings in silk twill keep their colour longest when dry cleaned and stored folded, out of direct sun. Reactive colour is fixed by steaming and washing-off, so it is wash-fast; the fibre decides the care.

What can I use instead of silk twill for jacket linings?

Polyester satin, for a lower cost per piece. Polyester satin is smooth and slippery, with a fluid drape.

How does silk twill compare with silk habutai for jacket linings?

Against silk habutai, silk twill for jacket linings is heavier (typical 12-16 momme against 5-16 momme); and semi-opaque where silk habutai is sheer. Pick silk twill for a heavier and more opaque jacket lining; pick silk habutai for a lighter and sheerer one.

What is the minimum order quantity for silk twill jacket linings?

Any MOQ — from 3 metres, or a few sample pieces. 3 m of silk twill already makes about 2 jacket linings, so a sample run can be a small batch.

How is the price of silk twill jacket linings worked out?

Competitive per-metre pricing, quoted for your design and quantity. For jacket linings, silk twill sits in the highest cost band of the bases we print, and ready jacket linings add stitching and finishing to the printed fabric.

Silk twill jacket linings by use

Each page sets the size, quantity, finishing and care for one use.

Get a quote for silk twill jacket linings

Send your design, the size and the quantity. We reply with the price and a sample plan.

Up to 3 files, 20 MB each — JPG, PNG, TIFF, PDF, PSD, AI, EPS, CDR or ZIP. Bigger files: send them on WhatsApp.
Or WhatsApp us

HM International

Okhla Industrial, S-73, Sanjay Colony II, Pocket Y, Sanjay Colony, Okhla Phase II, Area, New Delhi, Delhi 110020

+91 98181 98500

Monday10 am – 7 pm
Tuesday10 am – 7 pm
Wednesday10 am – 7 pm
Thursday10 am – 7 pm
Friday10 am – 7 pm
Saturday10 am – 7 pm
SundayClosed
WhatsApp us