
Which fabric prints bleed most?
Prints that bleed most are deep reds, navies and blacks on cotton and viscose, as heavy dye loads leave more unfixed colour. Sublimation prints on polyester rarely bleed in water, because the dye sits inside the fibre.
How does bleeding risk vary?
For colour bleeding, the table below gives the figures. A general guide; a test on your actual fabric and shade is the only proof.
| Situation | Risk | Why |
|---|---|---|
| Deep shade on cotton | Higher | More dye to fix and wash off |
| Pale shade on cotton | Lower | Less loose dye |
| Reactive print after a full wash-off | Lower | Loose dye has gone |
| Sublimation on polyester | Low | Dye sits inside the fibre |
How can a buyer test for colour bleeding?
To test for colour bleeding, wet a small printed piece, press it against a white cloth, and leave it to dry. Any colour on the white cloth is a warning, and it is worth asking for a proper wash test.
What should you do with a piece that bleeds at home?
With a piece that bleeds at home, wash it alone in cold water until the rinse water runs clear. Do not soak it for long or leave it wet against other items, as that is when dye transfers.