
What pixel size should artwork for turbans be?
Artwork for turbans should be planned as one length of about 108 × 600 cm on 44-inch fabric, or a repeat tile if the design is all-over. 150 DPI is a sensible general target for turbans, and 100 DPI can work for artwork seen from a distance. This is general guidance, not a specification of any machine.
| Resolution (general guidance) | Pixels for a 108 × 600 cm full length | Uncompressed RGB file size |
|---|---|---|
| 100 DPI | 4,252 × 23,622 px | 301 MB |
| 150 DPI | 6,378 × 35,433 px | 678 MB |
| 300 DPI | 12,756 × 70,866 px | 2,712 MB |
Should artwork for turbans be a repeat or an engineered panel?
For turbans: a turban is folded and wrapped many times, so small, even repeats survive best, and a single placed motif is rarely seen whole. Traditional solid colours may need only a subtle print. Fine fabric is usual, so the print shows lightly through layers.
How much hem or seam allowance does artwork for turbans need?
For turbans, each piece is a cut length of about 6 m, and a tied turban needs about 5-7 m of narrow, light fabric, so the file runs the full length plus the side margins you want.
Which fabrics change how artwork for turbans looks?
For turbans, cotton muslin break up very fine lines.