
Which fabric is best for jacket linings?
For jacket linings, the ranking below starts from what the job needs and the fabrics we print. Weights are typical, and metres are computed from the real size: about 1.5 m per jacket lining on 44-inch.
| Rank | Fabric | Process | Why | Metres for 50 | Typical fabric per jacket lining |
|---|---|---|---|---|---|
| 1 | Polyester satin | Sublimation | It slides easily and shows bold colour at a lower cost | About 56.6 m | 150-200 g |
| 2 | Silk habutai | Reactive | It is the lightest and feels premium in bespoke work | About 75 m | 37-116 g |
| 3 | Silk twill | Reactive | It has more body, with sharp small repeats | About 75 m | 87-116 g |
| 4 | Polyester crepe | Sublimation | Fluid, with a grainy crepe surface that resists creasing | About 56.6 m | 167-234 g |
| 5 | Silk satin | Reactive | Heavy, fluid silk with a slippery face | About 75 m | 116-159 g |
What do jacket linings ask of the fabric?
A jacket lining has to slide over a shirt sleeve and be seen only when the jacket opens. Smoothness and sheen come first, so a bold print can be a surprise without affecting wear.
Which fabrics should you avoid for jacket linings?
For jacket linings, skip these even if the price or the look tempts you.
| Fabric | Why not | Typical fabric per jacket lining |
|---|---|---|
| Cotton slub | Its rough surface grips the sleeve | 200-267 g |
| Cotton canvas | It adds bulk inside the jacket | 417-668 g |
| Linen | It grips, creases and holds on to the shirt | 200-334 g |
How far does each top fabric go for jacket linings?
For jacket linings, the top 4 go as far as the table shows, at the widest typical width. Plan samples and spares on top.
| Fabric | Width | Layout | From 3 m | Metres for 100 | Typical fabric for 100 jacket linings |
|---|---|---|---|---|---|
| Polyester satin | 58-inch | 1.13 m each | 2 | About 113.3 m | 15.0-20.0 kg |
| Silk habutai | 44-inch | 1.50 m each | 2 | About 150 m | 3.7-11.6 kg |
| Silk twill | 44-inch | 1.50 m each | 2 | About 150 m | 8.7-11.6 kg |
| Polyester crepe | 58-inch | 1.13 m each | 2 | About 113.3 m | 16.7-23.4 kg |
Does the print process change with the fabric for jacket linings?
For jacket linings, this list mixes both dye routes: polyester satin and polyester crepe by sublimation, and silk habutai and silk twill by reactive dye. A colour match on one route does not carry over to the other, so sample each one you are weighing.