
How many metres do jacket linings need by order size?
100 jacket linings need about 113.3 m of 58-inch fabric or 150 m of 44-inch, before samples and spares. The table gives other order sizes, on the typical widths of the fabrics that suit jacket linings.
| Order | 44-inch | 58-inch |
|---|---|---|
| 10 jacket linings | 15 m | 11.3 m |
| 25 jacket linings | 37.5 m | 28.3 m |
| 50 jacket linings | 75 m | 56.6 m |
| 100 jacket linings | 150 m | 113.3 m |
| 250 jacket linings | 375 m | 283.2 m |
| 500 jacket linings | 750 m | 566.4 m |
Does a wider fabric reduce the metres for jacket linings?
Yes, for jacket linings 58-inch fabric takes about 113.3 m for 100 jacket linings (1.13 m each), while 44-inch takes about 150 m (1.50 m each).
What changes the fabric you need for jacket linings?
For jacket linings: a jacket lining uses about 1.5 m on 44-inch, and it should be slippery enough to slide over shirt sleeves, which is why satin is common. Sleeves are often cut separately, but that is covered by this figure.
How much does the fabric for 100 jacket linings weigh?
The fabric for 100 jacket linings weighs about 3.7 to 23.4 kg before trims and packing, depending on the base.
| Fabric | Process | Widest typical width | Metres for 100 | Typical fabric per jacket lining | Typical fabric for 100 |
|---|---|---|---|---|---|
| Silk habutai | Reactive | 44-inch | 150 m | 37-116 g | 3.7-11.6 kg |
| Silk twill | Reactive | 44-inch | 150 m | 87-116 g | 8.7-11.6 kg |
| Polyester satin | Sublimation | 58-inch | 113.3 m | 150-200 g | 15.0-20.0 kg |
| Polyester crepe | Sublimation | 58-inch | 113.3 m | 167-234 g | 16.7-23.4 kg |
| Silk satin | Reactive | 44-inch | 150 m | 116-159 g | 11.6-15.9 kg |