
How many metres do shirts need by order size?
100 shirts need about 173.7 m of 58-inch fabric or 230 m of 44-inch, before samples and spares. The table gives other order sizes, on the typical widths of the fabrics that suit shirts.
| Order | 44-inch | 54-inch | 58-inch |
|---|---|---|---|
| 10 shirts | 23 m | 18.7 m | 17.4 m |
| 25 shirts | 57.5 m | 46.7 m | 43.4 m |
| 50 shirts | 115 m | 93.4 m | 86.9 m |
| 100 shirts | 230 m | 186.8 m | 173.7 m |
| 250 shirts | 575 m | 466.9 m | 434.3 m |
| 500 shirts | 1,150 m | 933.8 m | 868.5 m |
Does a wider fabric reduce the metres for shirts?
Yes, for shirts 58-inch fabric takes about 173.7 m for 100 shirts (1.74 m each), while 44-inch takes about 230 m (2.30 m each).
What changes the fabric you need for shirts?
For shirts: a full-sleeve shirt is about 2.3 m on 44-inch and a half-sleeve about 1.7 m, so sleeve length matters as much as width does. Matching a large pattern at the placket can raise that further.
How much does the fabric for 100 shirts weigh?
The fabric for 100 shirts weighs about 20.5 to 51.2 kg before trims and packing, depending on the base.
| Fabric | Process | Widest typical width | Metres for 100 | Typical fabric per shirt | Typical fabric for 100 |
|---|---|---|---|---|---|
| Cotton poplin | Reactive | 58-inch | 173.7 m | 256-333 g | 25.6-33.3 kg |
| Cotton slub | Reactive | 58-inch | 173.7 m | 307-409 g | 30.7-40.9 kg |
| Linen | Reactive | 58-inch | 173.7 m | 307-512 g | 30.7-51.2 kg |
| Linen cotton | Reactive | 58-inch | 173.7 m | 307-461 g | 30.7-46.1 kg |
| Viscose rayon | Reactive | 44-inch | 230 m | 257-334 g | 25.7-33.4 kg |
| Lyocell (Tencel) | Reactive | 58-inch | 173.7 m | 281-384 g | 28.1-38.4 kg |
| Cotton cambric | Reactive | 58-inch | 173.7 m | 205-256 g | 20.5-25.6 kg |
| Peach-finish polyester | Sublimation | 58-inch | 173.7 m | 205-307 g | 20.5-30.7 kg |
| Polyester roto | Sublimation | 58-inch | 173.7 m | no typical figure | no typical figure |
| Polyester spun | Sublimation | 58-inch | 173.7 m | 307-461 g | 30.7-46.1 kg |