
Why does warp direction matter when cutting a print?
Warp direction matters when cutting a print because a piece cut off grain can twist as it hangs or after washing. A scarf or flag looks wrong quickly when a printed border drifts away from the true yarn line.
How do warp, weft and bias compare?
For warp and weft, the table below gives the figures. A general guide for woven fabric; the lengths use a 3 m cut of 44-inch width.
| Direction | Runs | Give | On 3 m of 44-inch |
|---|---|---|---|
| Warp | Along the length | Least | 300 cm |
| Weft | Across the width | A little | 112 cm including selvedge |
| Bias | At 45 degrees | Most | 153 cm in a square of the usable width |
Does warp direction change a printed fabric’s look?
Warp direction can change a fabric’s look because weaves such as satin and twill reflect light differently along and across. In a garment, all panels should run the same way to avoid a visible difference in sheen.
Which way does printed fabric run on a roll?
On a roll, the warp runs along the length. The design’s up-and-down direction therefore normally follows the warp, unless a border or engineered layout requires a different plan.