
What pixel size should artwork for suit pieces be?
Artwork for suit pieces is usually a seamless repeat tile, or one panel of about 108 × 250 cm on 44-inch if the layout is engineered. 150 DPI is a sensible general target for suit pieces, and 100 DPI can work for artwork seen from a distance. This is general guidance, not a specification of any machine.
| Resolution (general guidance) | Pixels for a 108 × 250 cm full-width panel | Uncompressed RGB file size |
|---|---|---|
| 100 DPI | 4,252 × 9,843 px | 126 MB |
| 150 DPI | 6,378 × 14,764 px | 282 MB |
| 300 DPI | 12,756 × 29,528 px | 1,130 MB |
Should artwork for suit pieces be a repeat or an engineered panel?
For suit pieces: an unstitched suit set has three parts that must agree: the kurta panels with a yoke and hem border, a matching dupatta, and a coordinated bottom. Design them as one layout on the length. Make the border placements explicit, because they land where a tailor will cut the kurta later.
How much hem or seam allowance does artwork for suit pieces need?
For suit pieces, a kurta top takes about 2.5 m of 44-inch fabric, so a whole-panel layout is about 108 × 250 cm on 44-inch; seam allowances come from your pattern.
Which fabrics change how artwork for suit pieces looks?
For suit pieces, rayon crepe, polyester crepe, cotton slub and cotton muslin break up very fine lines, while viscose rayon, modal and cotton satin show fine detail and deep colour well.