
What pixel size should artwork for table runners be?
Artwork for table runners should be made at the 36 × 186 cm cut size, not the 33 × 180 cm finished size. 150 DPI at full size is a sensible general target for table runners, moving up toward 300 DPI for very fine detail. This is general guidance, not a specification of any machine.
| Resolution (general guidance) | Pixels for a 36 × 186 cm cut panel | Uncompressed RGB file size |
|---|---|---|
| 100 DPI | 1,417 × 7,323 px | 31 MB |
| 150 DPI | 2,126 × 10,984 px | 70 MB |
| 300 DPI | 4,252 × 21,969 px | 280 MB |
Should artwork for table runners be a placement or a repeat?
For table runners: a runner’s ends hang over the table edge, so the strongest art goes there, and the middle is often partly hidden by plates. Draw the design so it reads both ways round: guests sit on both sides, so a one-way design looks upside down to half of them.
How much hem or seam allowance does artwork for table runners need?
A 33 × 180 cm finished table runner is cut at 36 × 186 cm, which is 1.5 cm per side across the width and 3 cm per side along the length.
Which fabrics change how artwork for table runners looks?
For table runners, cotton slub, cotton twill, cotton canvas and polyester crepe break up very fine lines.