Mon–Sat 10 am – 7 pm · Okhla Phase II, New Delhi +91 98181 98500 · info@skyfashion.in

Home › Products › Suit piece printing › Silk twill

Silk twill suit piece printing

Custom suit pieces on silk twill, printed by reactive dyes in Okhla, Delhi: about 1 suit piece from 3 m of typical 44-inch silk twill. Fabric or ready-made.

Is silk twill right for suit pieces?

Silk twill suits suit pieces: it is soft and easy to handle. Printed with reactive dyes: very sharp detail and rich colour.

Trade-off: Silk costs more and needs gentle care, which is a lot to ask of an everyday suit piece. If that matters, choose cotton cambric for a lower cost per piece.

Design tips: Engineer the yoke, border and dupatta layout so the set matches when stitched. On silk twill, fine geometrics, foulards and small repeats print with very sharp edges.

Print your own design: send the artwork and the suit piece size, and we print a sample on silk twill before the run. Order the printed fabric only, or ready suit pieces stitched in-house.

WhatsApp your designOr use the form

Geometric print on silk

Suit pieces on silk twill: size and yield

Typical finished sizeKurta about 2.5 m, dupatta about 2.25 m, bottom about 2.5 m (on 44-inch); engineered panels
On 44-inch fabric (about 108 cm usable)1 suit piece from 3 m (about 2.5 m on 44-inch each)
Fabric for 10 suit piecesAbout 25.0 m of 44-inch fabric, before any extra for samples
Weight of fabric used per pieceAbout 145-193 g per suit piece (12-16 momme ≈ 52-69 gsm), before trims and packing
How it is countedBasis: a kurta top takes about 2.5 m of 44-inch fabric; wider fabric needs proportionally less length.
Finishing optionsCut panels with placed borders and yokes, matched dupatta, packed as sets

Silk twill at a glance

Hand-feel and drapeSmooth, with a fine diagonal; holds a knot and a fold well
SheenSoft lustre
OpacitySemi-opaque
Typical weight / widthTypical 12-16 momme; typical width 44″
How the print looksReactive: Very sharp detail and rich colour
CareDry clean
Good forTies, pocket squares, square scarves
Not ideal forEveryday washable items

How silk twill meets what suit pieces need

Weight: suit pieces work on very light to medium-weight fabricSilk twill is light, typical 12-16 momme (about 52-69 gsm), inside that range.
Opacity: suit pieces can be sheerSilk twill is semi-opaque with room to spare.
Drape: suit pieces handle best in a soft or fluid fabricSilk twill is soft, a match.

Silk twill comes in a typical 44-inch width, the width the 2.5 m per suit piece is based on; the same suit piece cut from a 58-inch fabric would need about 1.9 m.

Making suit pieces in silk twill

Silk twill is light, so it takes the usual suit piece finish without special handling: cut panels with placed borders and yokes.

What the print process means here

Suit pieces in silk twill are printed with reactive dyes, because silk twill is silk, a protein fibre; the dye bonds to the fibre, and the fabric is then steamed and washed off, so the hand of the suit piece stays soft with no coating on top. Silk twill is semi-opaque, so the design shows faintly on the back of a suit piece. Digital printing has no white ink, so any white in a suit piece design is the colour of the silk twill itself.

Silk twill or silk crepe for suit pieces?

Against silk crepe, silk twill for suit pieces is softly lustrous where silk crepe is matte; and soft in the hand where silk crepe is fluid. Pick silk twill for a glossier and firmer suit piece; pick silk crepe for a more matte and more fluid one. See silk crepe suit pieces.

Other fabrics for suit pieces

Other products in silk twill

Specification

Printing processReactive digital printing (steam fixed, washed off)
FabricsSilk twill
Typical fabric weightTypical 12-16 momme (typical width 44″)
SizesKurta about 2.5 m, dupatta about 2.25 m, bottom about 2.5 m (on 44-inch); engineered panels
Order asPrinted fabric only, or the ready finished product, stitched and packed in-house
Finishing optionsCut panels with placed borders and yokes, matched dupatta, packed as sets
Minimum orderFrom 3 metres of fabric, or a few sample pieces, including finished pieces
TurnaroundSample first; sample and bulk dates are confirmed with your quote
CareDry clean. Suit pieces in silk twill keep their colour longest when dry cleaned and stored folded, out of direct sun.
  • Any MOQ — from 3 metres, or a few sample pieces
  • Competitive per-metre pricing — ask for a quote
  • In-house digital printing unit at S-73, Okhla Industrial Area Phase II, New Delhi, since 1996
  • In-house tailoring: printed fabric only, or the ready stitched product

Frequently asked questions

Is silk twill good for suit pieces?

Silk twill suits suit pieces: it is soft and easy to handle. Silk costs more and needs gentle care, which is a lot to ask of an everyday suit piece.

How many suit pieces can I get from 3 metres of silk twill?

On 44-inch fabric (about 108 cm usable): 1 suit piece from 3 m (about 2.5 m on 44-inch each). Fabric for 10 suit pieces: about 25.0 m of 44-inch fabric, before any extra for samples. Weight of fabric used per piece: about 145-193 g per suit piece (12-16 momme ≈ 52-69 gsm), before trims and packing. Sizes and yields are typical; we confirm them with your quote.

Can you deliver ready suit pieces in silk twill, or only the printed fabric?

Both: our in-house tailoring stitches the suit pieces, or you take the printed silk twill only. Silk twill is light, so it takes the usual suit piece finish without special handling: cut panels with placed borders and yokes.

How do I wash a printed silk twill suit piece?

Dry clean. Suit pieces in silk twill keep their colour longest when dry cleaned and stored folded, out of direct sun. Reactive colour is fixed by steaming and washing-off, so it is wash-fast; the fibre decides the care.

What can I use instead of silk twill for suit pieces?

Cotton cambric, for a lower cost per piece. Cotton cambric is light, fine and soft; a little softer than poplin.

How does silk twill compare with silk satin for suit pieces?

Against silk satin, silk twill for suit pieces is softly lustrous where silk satin is high-sheen; and soft in the hand where silk satin is fluid. Pick silk twill for a more matte and firmer suit piece; pick silk satin for a glossier and more fluid one.

What is the minimum order quantity for silk twill suit pieces?

Any MOQ — from 3 metres, or a few sample pieces. 3 m of silk twill already makes about 1 suit piece, so a sample run can be a small batch.

How is the price of silk twill suit pieces worked out?

Competitive per-metre pricing, quoted for your design and quantity. For suit pieces, silk twill sits in the highest cost band of the bases we print, and ready suit pieces add stitching and finishing to the printed fabric.

Get a quote for silk twill suit pieces

Send your design, the size and the quantity. We reply with the price and a sample plan.

Up to 3 files, 20 MB each — JPG, PNG, TIFF, PDF, PSD, AI, EPS, CDR or ZIP. Bigger files: send them on WhatsApp.
Or WhatsApp us

HM International

Okhla Industrial, S-73, Sanjay Colony II, Pocket Y, Sanjay Colony, Okhla Phase II, Area, New Delhi, Delhi 110020

+91 98181 98500

Monday10 am – 7 pm
Tuesday10 am – 7 pm
Wednesday10 am – 7 pm
Thursday10 am – 7 pm
Friday10 am – 7 pm
Saturday10 am – 7 pm
SundayClosed
WhatsApp us