Mon–Sat 10 am – 7 pm · Okhla Phase II, New Delhi +91 98181 98500 · info@skyfashion.in

Home › Products › Suit piece printing › Silk habutai

Silk habutai suit piece printing

Custom suit pieces on silk habutai, printed by reactive dyes in Okhla, Delhi: about 1 suit piece from 3 m of typical 44-inch silk habutai. Fabric or ready-made.

Is silk habutai right for suit pieces?

Silk habutai suits suit pieces: it is soft and easy to handle and its sheerness gives a light, airy look. Printed with reactive dyes: deep, glowing colour; fine detail stays sharp on the smooth weave.

Trade-off: Silk costs more and needs gentle care, which is a lot to ask of an everyday suit piece. If that matters, choose cotton cambric for a lower cost per piece.

Design tips: Engineer the yoke, border and dupatta layout so the set matches when stitched. On silk habutai, fine detail and photographic designs stay sharp; dark grounds may show through slightly from the back.

Print your own design: send the artwork and the suit piece size, and we print a sample on silk habutai before the run. Order the printed fabric only, or ready suit pieces stitched in-house.

WhatsApp your designOr use the form

Digitally printed silk scarf

Suit pieces on silk habutai: size and yield

Typical finished sizeKurta about 2.5 m, dupatta about 2.25 m, bottom about 2.5 m (on 44-inch); engineered panels
On 44-inch fabric (about 108 cm usable)1 suit piece from 3 m (about 2.5 m on 44-inch each)
Fabric for 10 suit piecesAbout 25.0 m of 44-inch fabric, before any extra for samples
Weight of fabric used per pieceAbout 61-193 g per suit piece (5-16 momme ≈ 22-69 gsm), before trims and packing
How it is countedBasis: a kurta top takes about 2.5 m of 44-inch fabric; wider fabric needs proportionally less length.
Finishing optionsCut panels with placed borders and yokes, matched dupatta, packed as sets

Silk habutai at a glance

Hand-feel and drapeVery light, smooth and soft
SheenSoft natural lustre
OpacitySheer to semi-sheer
Typical weight / widthTypical 5-16 momme; typical width 44″
How the print looksReactive: Deep, glowing colour; fine detail stays sharp on the smooth weave
CareDry clean, or hand wash cold with mild soap
Good forLinings, scarves, pocket squares, hijabs
Not ideal forItems washed often, or anything heavy-duty

How silk habutai meets what suit pieces need

Weight: suit pieces work on very light to medium-weight fabricSilk habutai is very light, typical 5-16 momme (about 22-69 gsm), at the light end of that range.
Opacity: suit pieces can be sheerSilk habutai is sheer.
Drape: suit pieces handle best in a soft or fluid fabricSilk habutai is soft, a match.

Silk habutai comes in a typical 44-inch width, the width the 2.5 m per suit piece is based on; the same suit piece cut from a 58-inch fabric would need about 1.9 m.

Making suit pieces in silk habutai

Silk habutai is very light and sheer, so a heavy hem would show through and pull; on suit pieces we keep the edge to narrow hems. Because silk habutai is see-through, seam allowances inside a suit piece show from outside; French seams or narrow overlocking keep them neat. The open weave of silk habutai frays at cut edges, so every cut edge of a suit piece is finished, never left raw.

What the print process means here

Suit pieces in silk habutai are printed with reactive dyes, because silk habutai is silk, a protein fibre; the dye bonds to the fibre, and the fabric is then steamed and washed off, so the hand of the suit piece stays soft with no coating on top. On sheer silk habutai the print passes through, so the back of each suit piece shows the design too, a little lighter and mirrored. Digital printing has no white ink, so any white in a suit piece design is the colour of the silk habutai itself.

Silk habutai or silk tabby for suit pieces?

Against silk tabby, silk habutai for suit pieces is sheer where silk tabby is semi-opaque; and softly lustrous where silk tabby is matte. Pick silk habutai for a sheerer and glossier suit piece; pick silk tabby for a more opaque and more matte one. See silk tabby suit pieces.

Other fabrics for suit pieces

Other products in silk habutai

Specification

Printing processReactive digital printing (steam fixed, washed off)
FabricsSilk habutai
Typical fabric weightTypical 5-16 momme (typical width 44″)
SizesKurta about 2.5 m, dupatta about 2.25 m, bottom about 2.5 m (on 44-inch); engineered panels
Order asPrinted fabric only, or the ready finished product, stitched and packed in-house
Finishing optionsCut panels with placed borders and yokes, matched dupatta, packed as sets
Minimum orderFrom 3 metres of fabric, or a few sample pieces, including finished pieces
TurnaroundSample first; sample and bulk dates are confirmed with your quote
CareDry clean, or hand wash cold with mild soap. Suit pieces in silk habutai keep their colour longest when dry cleaned and stored folded, out of direct sun.
  • Any MOQ — from 3 metres, or a few sample pieces
  • Competitive per-metre pricing — ask for a quote
  • In-house digital printing unit at S-73, Okhla Industrial Area Phase II, New Delhi, since 1996
  • In-house tailoring: printed fabric only, or the ready stitched product

Frequently asked questions

Is silk habutai good for suit pieces?

Silk habutai suits suit pieces: it is soft and easy to handle and its sheerness gives a light, airy look. Silk costs more and needs gentle care, which is a lot to ask of an everyday suit piece.

How many suit pieces can I get from 3 metres of silk habutai?

On 44-inch fabric (about 108 cm usable): 1 suit piece from 3 m (about 2.5 m on 44-inch each). Fabric for 10 suit pieces: about 25.0 m of 44-inch fabric, before any extra for samples. Weight of fabric used per piece: about 61-193 g per suit piece (5-16 momme ≈ 22-69 gsm), before trims and packing. Sizes and yields are typical; we confirm them with your quote.

Can you deliver ready suit pieces in silk habutai, or only the printed fabric?

Both: our in-house tailoring stitches the suit pieces, or you take the printed silk habutai only. Silk habutai is very light and sheer, so a heavy hem would show through and pull; on suit pieces we keep the edge to narrow hems. Because silk habutai is see-through, seam allowances inside a suit piece show from outside; French seams or narrow overlocking keep them neat.

How do I wash a printed silk habutai suit piece?

Dry clean, or hand wash cold with mild soap. Suit pieces in silk habutai keep their colour longest when dry cleaned and stored folded, out of direct sun. Reactive colour is fixed by steaming and washing-off, so it is wash-fast; the fibre decides the care.

What can I use instead of silk habutai for suit pieces?

Cotton cambric, for a lower cost per piece. Cotton cambric is light, fine and soft; a little softer than poplin.

How does silk habutai compare with silk twill for suit pieces?

Against silk twill, silk habutai for suit pieces is lighter (typical 5-16 momme against 12-16 momme); and sheer where silk twill is semi-opaque. Pick silk habutai for a lighter and sheerer suit piece; pick silk twill for a heavier and more opaque one.

What is the minimum order quantity for silk habutai suit pieces?

Any MOQ — from 3 metres, or a few sample pieces. 3 m of silk habutai already makes about 1 suit piece, so a sample run can be a small batch.

How is the price of silk habutai suit pieces worked out?

Competitive per-metre pricing, quoted for your design and quantity. For suit pieces, silk habutai sits in the highest cost band of the bases we print, and ready suit pieces add stitching and finishing to the printed fabric.

Get a quote for silk habutai suit pieces

Send your design, the size and the quantity. We reply with the price and a sample plan.

Up to 3 files, 20 MB each — JPG, PNG, TIFF, PDF, PSD, AI, EPS, CDR or ZIP. Bigger files: send them on WhatsApp.
Or WhatsApp us

HM International

Okhla Industrial, S-73, Sanjay Colony II, Pocket Y, Sanjay Colony, Okhla Phase II, Area, New Delhi, Delhi 110020

+91 98181 98500

Monday10 am – 7 pm
Tuesday10 am – 7 pm
Wednesday10 am – 7 pm
Thursday10 am – 7 pm
Friday10 am – 7 pm
Saturday10 am – 7 pm
SundayClosed
WhatsApp us